SM20M05-18

05067 SM20M05-18 Only One Name Means ProT ek’Tion™ ST ANDARD CAPACIT ANCE TVS ARRA Y APPLICA TIONS ✔ Multiple I/O Port Protection ✔ Board Level Interface Connection ✔ RS-232, RS-422 & RS-423 Data Lines ✔ Portable Electronics IEC COMPA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line) FEA TURES ✔ 200 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ ESD Protection > 25 kilovolts ✔ Unidirectional Configuration ✔ Monolithic Design ✔ Protection 18 I/O Lines ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SO-20WB (Wide Body) Package Weight 0.5 grams (Approximate) Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 24mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin One Defined By Dot on Top of Package SO-20L (WIDE BODY) PIN CONFIGURA TION GND 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 GND 7 8 9 10 05067.R5 4/05 1 www.protekdevices.com SM20M05-18 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TJ TSTG VALUE 200 -55°C to 150°C -55°C to 150°C UNITS Watts °C °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING CODE RATED MAXIMUM MINIMUM STAND-OFF BREAKDOWN CLAMPING VOLTAGE VOLTAGE VOLTAGE (See Fig. 2) @ 1mA V(BR) VOLTS 6.0 @ IP = 1 A VC VOLTS 9.8 MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM MAXIMUM FORWARD CAPACITANCE (PER LINE) VOLTAGE V WM VOLTS SM20M05-18 VEB 5.0 @8/20µs VC @ IPP 12.0V@ 16.0A @VWM ID µA 20 @200 mA VF VOLTS 1.25 @0V, 1 MHz C pF 120 05067.R5 4/05 2 www.protekdevices.com SM20M05-18 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10,000 PPP - Peak Pulse Power - Watts 1,000 200W 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGURE 2 PULSE WAVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t I /2 PP 10 15 t - Time - µs 20 25 30 100 80 % Of Rated Power FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20µs 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 05067.R5 4/05 3 www.protekdevices.com SM20M05-18 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE -A- SO-20WB (Wide Body) 20 11 -B- P 0.010” (0.25 MM) M BM 10 PL 1 10 PACKAGE DIMENSIONS DIM A B C D F G J K P R NOTES 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE MILLIMETERS MIN MAX 12.65 7.40 2.35 0.35 0.50 1.27 BSC 0.25 0.10 10.05 0.25 INCHES MIN MAX G C 0º - 7º -T20 PL 0.010” (0.25 MM) M TBS R X 45º J F D AS K 0.499 0.510 12.95 0.292 0.299 7.60 0.093 0.104 2.65 0.014 0.019 0.49 0.020 0.035 0.90 1.27 BSC 0.05 BSC 0.05 BSC 0.010 0.012 0.32 0.004 0.009 0.25 0.415 10.55 0.395 0.029 0.75 0.010 MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 0.325” ± 0.005” 0.420” MIN 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T13 = 13 Inch Reel - 1,000 pieces per 24mm tape, i.e., SM20M05-18-T13. 3. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., SM20M05-18-LF-T13. 4. No Suffix = Product Shipped in Tubes of 37 pcs per Tube. 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06018 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05067.R5 4/05 4 www.protekdevices.com