SM8LC24

05019 SM8LC05 thru Only One Name Means ProT ek’Tion™ SM8LC24 LOW CAPACIT ANCE TVS ARRA Y APPLICA TIONS ✔ Video On-Demand ✔ ISDN Telecom Interface ✔ USB, ADSL & SCSI Interfaces ✔ Modems ✔ LAN Interconnects ✔ Portable Electronics IEC COMPA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line) FEA TURES ✔ 800 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Bidirectional Configuration ✔ Available in 5 Voltage Types: 5V to 24V ✔ Protects Up to Two Line Pairs ✔ ESD Protection > 40 kilovolts ✔ LOW CAPACITANCE: 25pF ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SO-8 Package Weight 70 milligrams (Approximate) Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin One Defined By Dot on Top of Package SO-8 PIN CONFIGURA TION 8 7 6 5 1 05019.R4 3/05 2 1 3 4 www.protekdevices.com SM8LC05 thru SM8LC24 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TJ TSTG VALUE 800 -55°C to 150°C -55°C to 150°C UNITS Watts °C °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1-2) DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1 A VC VOLTS 9.8 13.3 19.0 25.5 40.0 MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE VWM VOLTS SM8LC05 SM8LC08 SM8LC12 SM8LC15 SM8LC24 PGA PGB PGC PGD PGE 5.0 8.0 12.0 15.0 24.0 @ 1mA V(BR) VOLTS 6.0 8.5 13.3 16.7 26.7 @8/20µs VC @ IPP 24.6V @ 45A 25.5V @ 40A 32.9V @ 34A 38.5V @ 27A 48.5V @ 22A @VWM ID µA 100 10 4 4 4 0V @ 1 MHz C pF 25 25 25 25 25 Note 1: Devices are designed to be used in parallel (See Circuit Diagram) Page 1. For other applications, contact the factory. Do not surge in the “forward” direction of the TVS. Note 2: Do not surge from pins 1 to 8, 7 to 2, 6 to 3 and 4 to 5. PIV typically greater than 100 volts for each rectifier diode. 05019.R4 3/05 2 www.protekdevices.com SM8LC05 thru SM8LC24 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME 10,000 PPP - Peak Pulse Power - Watts 800W 8/20µs Waveform 1,000 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGURE 2 PULSE WAVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t I /2 PP 10 15 t - Time - µs 20 25 30 100 80 % Of Rated Power FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20µs 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 05019.R4 3/05 3 www.protekdevices.com SM8LC05 thru SM8LC24 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE -A- SO-8 8 5 -BP 0.010” (0.25 MM) M BM 4 PL 1 4 PACKAGE DIMENSIONS DIM MILLIMETERS MIN MAX 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 INCHES MIN MAX D G C R X 45º 0º - 10º -TK 0.010” (0.25 MM) M TBS J AS F 8 PL A B C D F G J K P R NOTES 5.00 0.189 0.196 4.00 0.150 0.157 1.75 0.054 0.068 0.49 0.014 0.019 1.250 0.016 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.007 0.009 0.25 0.004 0.008 6.20 0.229 0.244 0.50 0.010 0.019 MOUNTING PAD 0.050” ± 0.005” 0.030” ± 0.005” 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusion. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.160” ± 0.005” 0.245” MIN 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., SM8LC05-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., SM8LC05-T13. 4. Suffix - LF= Lead-Free, Pure-Tin Plating, i.e., SM8LC05-LF-T7. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06009 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05019.R4 3/05 4 www.protekdevices.com WWW.ALLDATASHEET.COM Copyright © Each Manufacturing Company. All Datasheets cannot be modified without permission. This datasheet has been download from : www.AllDataSheet.com 100% Free DataSheet Search Site. Free Download. No Register. Fast Search System. www.AllDataSheet.com