SMLC12C-2

05105 Only One Name Means ProTek’Tion™ SMLC6.5C-2 - SMLC12C-2 high PoweRed MULTi-LiNe Low CaPaCiTaNCe TVS aRRaY deSCRiPTioN The SMLCxxC-2 Series are high powered multi-line low capacitance transient voltage suppressor arrays that provide board level protection for standard TTL and MOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. This series has a peak pulse power rating of 400 Watts for an 10/1000µs waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. So-16 PaCkage FeaTUReS • • • • • • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns Compatible with IEC 61000-4-5 (Surge): 100A (Applies to 6.5V Only) 400 Watts Peak Pulse Power per Line (tp = 10/1000µs) 3,900 Watts Peak Pulse Power per Line (tp = 8/20µs) ITKU.20 IPP @ 40A (5/310µs) - (Applies to 6.5V Only) Bidirectional Configuration High Surge Capability Available in Multiple Voltages Protects 2 Bidirectional Lines Low Capacitance < 30pF per Line Pair RoHS Compliant REACH Compliant aPPLiCaTioNS • • • • • • T1/E1 RS-422, RS-423 & RS-485 SDH/SONET, ATM Equipment & Systems Industrial Control and Monitoring Cable Modem Intra-Building Protection Customer Premise Equipment (CPE) MeChaNiCaL ChaRaCTeRiSTiCS • • • • Molded JEDEC SO-16 Package Approximate Weight: 0.15 grams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 16mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PiN CoNFigURaTioN 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 05105.R8 12/11 Page 1 www.protekdevices.com 05105 Only One Name Means ProTek’Tion™ SMLC6.5C-2 - SMLC12C-2 TYPiCaL deViCe ChaRaCTeRiSTiCS MaXiMUM RaTiNgS @ 25°C Unless otherwise Specified PaRaMeTeR Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 Peak Pulse Power (tp = 10/1000µs) - See Figure 1 SYMBoL TL TSTG PPP PPP VaLUe -55 to 150 -55 to 150 3,900 400 UNiTS °C °C Watts Watts eLeCTRiCaL ChaRaCTeRiSTiCS PeR LiNe @ 25°C Unless otherwise Specified PaRT NUMBeR RaTed STaNd-oFF VoLTage MiNiMUM BReakdowN VoLTage @1ma V(BR) VoLTS 7.2 13.3 MaXiMUM CLaMPiNg VoLTage (Fig. 3) @ 8/20µS VC @ i PP 28.0V @ 150.0A 35.0V @ 140.0A MaXiMUM Leakage CURReNT @V wM id µa 300 2 TYPiCaL CaPaCiTaNCe VwM VoLTS SMLC6.5C-2 SMLC12C-2 6.5 12.0 @0V, 1Mhz C pF 30 30 FigURe 1 MaXiMUM iPP VS PULSe dURaTioN BY VoLTage 1000 6.5V 12V 100 iPP - amps 10 1 10 100 td - Pulse duration - µs 1000 05105.R8 12/11 Page 2 www.protekdevices.com 05105 Only One Name Means ProTek’Tion™ SMLC6.5C-2 - SMLC12C-2 TYPiCaL deViCe ChaRaCTeRiSTiCS FigURe 2 Peak PULSe PoweR VS PULSe TiMe 10 PPP - Peak Pulse Power - kilowatts 3900W, 8/20µs Waveform 1 400W, 10/1000µs Waveform 0.1 10 100 td - Pulse duration - µs 1,000 120 iPP - Peak Pulse Current - % of iPP FigURe 3 PULSe waVe FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs FigURe 4 PoweR deRaTiNg CURVe 100 100 80 60 40 20 0 0 5 Peak Pulse Power 10/1000µs 80 % of Rated Power e -t 60 td = t/(IPP/2) 40 20 10 15 t - Time - µs 20 25 30 0 0 25 50 75 100 125 150 TL - Lead Temperature - °C 05105.R8 12/11 Page 3 www.protekdevices.com 05105 Only One Name Means ProTek’Tion™ SMLC6.5C-2 - SMLC12C-2 TYPiCaL deViCe ChaRaCTeRiSTiCS FigURe 5 oVeRShooT & CLaMPiNg VoLTage FoR SMLC6.5C-2 40 30 5 Volts per division 20 10 0 eSd Test Pulse - 25 kilovolt, 1/30ns (waveshape) FigURe 6 iNSeRTioN LoSS - SMLC12C-2 FigURe 7 ReTURN LoSS - SMLC12C-2 10 db per division 10 db per division 20 20 Ref 0 Ref 0 -20 -20 100 Mhz per division 100 Mhz per division 05105.R8 12/11 Page 4 www.protekdevices.com 05105 Only One Name Means ProTek’Tion™ SMLC6.5C-2 - SMLC12C-2 SPiCe ModeL FigURe 1 SPiCe ModeL I/O ABD LCRD LCRD Lg 0.8nH ABD ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance TaBLe 1 - SPiCe PaRaMeTeRS PaRaMeTeR BV IBV Cjo IS Vj M N RS TT EG UNiT V µA pF A V Ohms s eV aBd(TVS) See Table 2 1 See Table 2 See Table 2 0.6 0.33 1 See Table 2 1E-8 1.11 LCRd 200 0.01 5 1E-14 0.6 0.33 1 0.31 1E-9 1.11 PaRT NUMBeR SMLC6.5-2 SMLC12C-2 TaBLe 2 - aBd SPeCiFiC SPiCe PaRaMeTeRS i S (aMPS) BV(VoLTS) Cjo(pF) 7.2 13.3 2600 1150 1E-11 1E-13 Rs(ohMS) 0.075 0.080 05105.R8 12/11 Page 5 www.protekdevices.com 05105 Only One Name Means ProTek’Tion™ SMLC6.5C-2 - SMLC12C-2 aPPLiCaTioN iNFoRMaTioN 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 Circuit connectivity is as follows: • Line 1 connected to pins 1, 2, 15 and 16. • Line 2 connected to pins 3, 4, 13 and 14. • Line 3 connected to pins 5, 6, 11 and 12. • Line 4 connected to pins 7, 8, 9 and 10. FigURe 1 - BidiReCTioNaL diFFeReNTiaL PRoTeCTioN FoR T1/e1 CiRCUiT BoaRd ReCoMMeNdaTioNS Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: • The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. • The path length between the TVS device and the protected line should be minimized. • All conductive loops including power and ground loops should be minimized. • The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. • Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05105.R8 12/11 Page 6 www.protekdevices.com 05105 Only One Name Means ProTek’Tion™ SMLC6.5C-2 - SMLC12C-2 So-16 PaCkage iNFoRMaTioN oUTLiNe diMeNSioNS diM A B C D F G J K P R 1. 2. 3. 4. 5. 6. -A- MiLLiMeTeRS MiN 9.80 3.80 1.35 0.35 0.40 iNCheS MiN 0.386 0.150 0.054 0.014 0.016 MaX 10.00 4.00 1.75 0.49 1.25 MaX 0.393 0.157 0.068 0.019 0.049 G D R X 45° 1 8 16 9 -B- P + 0.010” (0.25mm) M B M 8 PL 1.27 BSC 0.18 0.10 5.80 0.25 0.25 0.25 6.20 0.50 0.05 BSC 0.007 0.004 0.229 0.010 0.009 0.008 0.244 0.019 C 0° - 10° -T- NoTeS + 0.010” (0.25mm) M T B S A S 16 PL K F J -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. Pad LaYoUT diMeNSioNS diM A B C D E NoTeS A MiLLiMeTeRS MiN 1.14 0.64 6.22 3.94 1.02 iNCheS MiN 0.045 0.025 0.245 0.155 0.040 B MaX 1.40 0.89 4.17 1.27 MaX 0.055 0.035 0.165 0.050 E D C 1. Controlling dimension: inches. 05105.R8 12/11 Page 7 www.protekdevices.com 05105 Only One Name Means ProTek’Tion™ SMLC6.5C-2 - SMLC12C-2 TaPe aNd ReeL P0 t D 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E F W K0 B0 A0 P User Direction of Feed SPeCiFiCaTioNS ReeL dia. 178mm (7”) 1. 2. 3. 4. 5. 6. TaPe widTh 16mm a0 B0 k0 d e F w P0 P2 P tmax 0.25 6.50 ± 0.10 10.30 ± 0.10 2.10 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 16.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 NoTeS Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 16mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 16mm tape. Bulk product shipped in tubes of 48 pieces per tube. Marking on Part - part number, date code, logo and pin one defined by dot on top of package. Package outline per document number 06007.R3 1/11. oRdeRiNg iNFoRMaTioN BaSe PaRT NUMBeR (xx = Voltage) SMLCxxC-2 SMLCxxC-2 LeadFRee SUFFiX -LF -LF TaPe SUFFiX -T7 -T13 QTY/ReeL 1,000 2,500 ReeL SiZe 7” 13” TUBe QTY 48 48 05105.R8 12/11 Page 8 www.protekdevices.com 05105 Only One Name Means ProTek’Tion™ SMLC6.5C-2 - SMLC12C-2 CoMPaNY iNFoRMaTioN CoMPaNY PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CoNTaCT US Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05105.R8 12/11 Page 9 www.protekdevices.com