SR12_10

05255 Only One Name Means ProTek’Tion™ SR12 500 WATT loW cAPAciTAnce STeeRing diode/TVS ARRAy deScRiPTion The SR12 is a low capacitance steering diode TVS array, designed to protect two I/O lines from the effects of Electrostatic Discharge (ESD) and Electrical Fast Transients (EFT). The SR12 provides ESD protection and has a peak pulse power rating of 500 Watts for an 8/20µs waveshape. The low capacitance of the steering diode allows the designer to protect high speed data applications. The small SOT-143 package, with four leads reduces the internal lead inductance for low overshoot voltage during fast front time transient events, such as ESD. The SR12 meets the IEC 61000-4-2 and IEC 61000-4-4 requirements. SoT-143 PAckAge FeATuReS • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3 (Line-Line) • 500 Watts Peak Pulse Power per Line (tp = 8/20µs) • Protects Two I/O Ports & Power Supply • Low Capacitance: 10pF • RoHS Compliant • REACH Compliant APPlicATionS • • • • Ethernet - 10/100/1000 Base T USB Wireless Communications FireWire MechAnicAl chARAcTeRiSTicS • • • • Molded JEDEC SOT-143 Package Approximate Weight: 9 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 8mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 Pin conFiguRATion GND 1 4 REF I/O 2 3 I/O 05255.R3 8/10 Page 1 www.protekdevices.com 05255 Only One Name Means ProTek’Tion™ SR12 TyPicAl deVice chARAcTeRiSTicS MAXiMuM RATingS @ 25°c unless otherwise Specified PARAMeTeR Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 Peak Forward Voltage - IF = 1A, 8/20µs SyMBol TL TSTG PPP VF VAlue -55 to 150 -55 to 150 500 1.5 uniTS °C °C Watts Volts elecTRicAl chARAcTeRiSTicS PeR line @ 25°c unless otherwise Specified PART nuMBeR deVice MARking RATed STAnd-oFF VolTAge MiniMuM BReAkdoWn VolTAge @ 1mA V(BR) VolTS 13.3 MAXiMuM clAMPing VolTAge (Fig. 2) @ i P = 1A Vc VolTS 19.0 MAXiMuM clAMPing VolTAge (Fig. 2) @ 8/20µs Vc @ i PP VolTS 30.0V @ 16.0A MAXiMuM leAkAge cuRRenT @ VWM id µA 1 VWM VolTS SR12 noTeS 12A 12.0 MAXiMuM cAPAciTAnce PeR line (note 1) (Fig. 5) 0V, 1Mhz c j(Sd) pF 10 1. As shown in Figure 5, REF 1 is connected to ground, REF 2 is connected to +VCC and input applies to VCC = 12V, VSIGN = 30mV, F = 1MHz. 05255.R3 8/10 Page 2 www.protekdevices.com 05255 Only One Name Means ProTek’Tion™ SR12 TyPicAl deVice chARAcTeRiSTicS FiguRe 1 PeAk PulSe PoWeR VS PulSe TiMe 10,000 PPP - Peak Pulse Power - Watts 1,000 500W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse duration - µs 1,000 10,000 120 iPP - Peak Pulse current - % of iPP FiguRe 2 PulSe WAVe FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % of Rated Power FiguRe 3 PoWeR deRATing cuRVe Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - Time - µs 20 25 30 0 25 50 75 100 125 TA - Ambient Temperature - °c 150 05255.R3 8/10 Page 3 www.protekdevices.com 05255 Only One Name Means ProTek’Tion™ SR12 TyPicAl deVice chARAcTeRiSTicS FiguRe 4 oVeRShooT & clAMPing VolTAge 20 10 5 Volts per division 0 -10 -20 eSd Test Pulse - 5 kilovolt, 1/30ns (Waveshape) FiguRe 5 inPuT cAPAciTAnce ciRcuiT REF2 I/O VSIGN G REF1 +VCC FiguRe 6 TyPicAl ReVeRSe VolTAge VS cAPAciTAnce 16 12 c - capacitance - pF 8 4 0 0 1 2 3 VR - Reverse Voltage - Volts 4 5 05255.R3 8/10 Page 4 www.protekdevices.com 05255 Only One Name Means ProTek’Tion™ SR12 APPlicATion inFoRMATion VBus 1 4 2 3 D+ DD+ D3 VBus VBus USB PORT VBus USB PORT USB CONTROLLER 2 1 4 FiguRe 1 - uSB PRoTecTion Two SR12s (Unidirectional) in a Common-Mode configuration. Circuit connectivity is as follows: • Pins 2 and 3 are connected to the datalines • Pin 1 is connected to ground • Pin 4 is connected to the databus ciRcuiT BoARd RecoMMendATionS Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended: • The protection device should be placed near the input terminals or connectors, the device will divert the transient current immediately before it can be coupled into the nearby traces. • The path length between the TVS device and the protected line should be minimized. • All conductive loops including power and ground loops should be minimized. • The transient current return path to ground should be kept as short as possible to reduce parasitic inductance. • Ground planes should be used whenever possible. For multilayer PCBs, use ground vias. 05255.R3 8/10 Page 5 www.protekdevices.com 05255 Only One Name Means ProTek’Tion™ SR12 SoT-143 PAckAge inFoRMATion ouTline diMenSionS diM A B C D F G J K L L1 R S noTeS A G L MilliMeTeRS Min 2.80 1.20 0.84 0.39 0.79 1.78 0.08 0.46 0.445 0.40 0.72 2.11 incheS Min 0.110 0.047 0.033 0.015 0.031 0.070 0.003 0.018 0.0175 0.016 0.028 0.083 MAX 3.04 1.39 1.14 0.50 0.93 2.03 0.15 0.60 0.60 0.60 0.83 2.48 MAX 0.120 0.055 0.045 0.020 0.037 0.080 0.006 0.024 0.024 0.024 0.033 0.098 H C F D BS L1 K J R 1. Dimensioning and tolerances per ANSI Y14.M, 1985. 2. Controlling dimension: inches. 3. Dimensions are exclusive of mold flash and metal burrs. PAd lAyouT diMenSionS diM A B C D E F noTeS C A MilliMeTeRS Min 1.88 1.80 0.71 0.76 1.07 0.71 incheS Min 0.074 0.071 0.028 0.030 0.042 0.028 MAX 2.13 2.06 0.97 1.02 1.32 0.97 MAX 0.084 0.081 0.038 0.040 0.052 0.038 E F D B 1. Controlling dimension: inches. 05255.R3 8/10 Page 6 www.protekdevices.com 05255 Only One Name Means ProTek’Tion™ SR12 TAPe And Reel P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 K0 Pin 1 F W B0 P User Direction of Feed SPeciFicATionS Reel diA. 178mm (7”) 1. 2. 3. 4. 5. TAPe WidTh 8mm A0 B0 k0 d e F W P0 P2 P tmax 0.25 3.10 ± 0.10 2.70 ± 0.10 1.35 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 noTeS Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Suffix - T13 = 13” Reel - 10,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and date code. Package outline, pad layout and tape specifications per document number 06011.R4 8/10. oRdeRing inFoRMATion BASe PART nuMBeR SR12 SR12 leAdFRee SuFFiX -LF -LF TAPe SuFFiX -T7 -T13 QTy/Reel 3000 10,000 Reel SiZe 7” 13” TuBe QTy n/a n/a 05255.R3 8/10 Page 7 www.protekdevices.com 05255 Only One Name Means ProTek’Tion™ SR12 coMPAny inFoRMATion coMPAny PRoFile ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. conTAcT uS corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2002 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05255.R3 8/10 Page 8 www.protekdevices.com