SRV05-4LC

05305 Only One Name Means ProTek’Tion™ SRV05-4LC uLtRa Low CaPaCitanCe SteeRing diode/tVS aRRay deSCRiPtion The SRV05-4LC is a high-powered, ultra low capacitance device for dual USB port and power bus protection. The SRV05-4LC is rated for 5.0V applications, with 500 Watts peak pulse power per line (8/20µs) and an ultra low capacitance of 0.7pF (CJ(SD)). The SRV05-4LC is ideally suited for surge suppression and ESD protection of high-speed data line applications such as video graphic cards, 3G cellular handsets, gigabit Ethernet and SIMM cards. The SRV05-4LC combines eight ultra low capacitance steering diodes for up to four individual data or transmission lines and one TVS diode for the power bus. This device is offered in the space-saving SOT-23-6 package configuration. The small package size minimizes the lead inductance, preventing overshoot voltages during high ESD current events. ProTek recommends that the SRV05-4LC be mounted near the connector on the PCB. This device meets and exceeds the ESD requirements of IEC 61000-4-2 and the EFT requirements of IEC 61000-4-4. Sot-23-6 PaCkage FeatuReS aPPLiCationS • • • • • • Gigabit Ethernet SMART Phones Portable Electronics Video Card Interfaces USB 2.0 Interfaces DVI Interfaces • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line0 • 500 Watts Peak Pulse Power per Line(tp = 8/20µs) • ESD Protection > 25 kilovolts • Low Clamping Voltage • Protection for 4 Lines • Ultra Low Capacitance CJ(SD): 0.7pF Typical • RoHS Compliant • REACH Compliant meChaniCaL ChaRaCteRiStiCS • • • • Molded JEDEC SOT-23-6 Package Approximate Weight: 16 milligrams Lead-Free Nickel Paladium Gold Plating Solder Reflow Temperature: Nickel-Paladium-Gold: Ni/Pd/Au, 96/3.5/0.5: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 Pin ConFiguRation I/O 1 1 GND 2 I/O 2 3 6 I/O 4 5 REF 4 I/O 3 05305.R1 2/11 Page 1 www.protekdevices.com 05305 Only One Name Means ProTek’Tion™ SRV05-4LC tyPiCaL deViCe ChaRaCteRiStiCS maXimum RatingS @ 25°C unless otherwise Specified PaRameteR Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Forward Surge Rating (5ms @ 25°C, IF = 10mA) SymBoL PPP TL TSTG VF VaLue 500 -55 to 150 -55 to 150 0.5 Min. - 1.2 Max. unitS Watts °C °C Volts eLeCtRiCaL ChaRaCteRiStiCS PeR Line @ 25°C unless otherwise Specified PaRt numBeR deViCe maRking Rated Stand-oFF VoLtage (note 1) Vwm VoLtS SRV05-4LC noteS TS 5.0 minimum BReakdown VoLtage (note 1) @ 1ma V(BR) VoLtS 6.0 maXimum CLamPing VoLtage (Fig. 2) (note 1) @ i P = 1a VC VoLtS 12.0 maXimum CLamPing VoLtage (Fig. 2) (note 1) @ i P = 5a VC VoLtS 15.0 maXimum Leakage CuRRent (note 1) @V wm id µa 5 tyPiCaL CaPaCitanCe (note 2) @0V, 1mhz C J(Sd) pF 0.7 1. Measured from I/O pin to ground. 2. Cj = C(measured)/2. 05305.R1 2/11 Page 2 www.protekdevices.com 05305 Only One Name Means ProTek’Tion™ SRV05-4LC tyPiCaL deViCe ChaRaCteRiStiCS FiguRe 1 Peak PuLSe PoweR VS PuLSe time 10,000 PPP - Peak Pulse Power - watts 1,000 500W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse duration - µs 1,000 10,000 120 iPP - Peak Pulse Current - % of iPP FiguRe 2 PuLSe waVe FoRm tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 60 40 20 0 0 5 e-t td = t/(IPP/2) 10 15 t - time - µs 20 25 30 05305.R1 2/11 Page 3 www.protekdevices.com 05305 Only One Name Means ProTek’Tion™ SRV05-4LC tyPiCaL deViCe ChaRaCteRiStiCS FiguRe 3 PoweR deRating CuRVe Peak Pulse Power 8/20µs 100 80 % of Rated Power 60 40 20 0 Average Power 0 25 50 75 100 125 ta - ambient temperature - °C 150 FiguRe 4 oVeRShoot & CLamPing VoLtage 35 5 Volts per division 25 15 5 -5 eSd test Pulse - 25 kilovolt, 1/30ns (waveshape) 05305.R1 2/11 Page 4 www.protekdevices.com 05305 Only One Name Means ProTek’Tion™ SRV05-4LC Sot-23-6 PaCkage inFoRmation outLine dimenSionS dim A B C D E G J K L M noteS D E miLLimeteRS min 2.80 1.50 0.90 0.30 0.85 0.90 0.09 2.60 0.0 0.30 inCheS min 0.110 0.059 0.036 0.012 0.033 0.036 0.003 0.102 0.0 0.012 maX 3.05 1.75 1.30 0.40 1.05 1.45 0.20 3.00 0.15 0.60 maX 0.120 0.070 0.051 0.016 0.040 0.057 0.008 0.118 0.006 0.024 G A 1 2 3 L B M J 6 5 4 K 0° - 8° 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. C Pad Layout dimenSionS dim A B C D E noteS B C E D miLLimeteRS nominaL 0.70 1.90 0.95 2.40 1.00 inCheS nominaL 0.028 0.074 0.037 0.094 0.039 A 1. Controlling dimension: inches. 05305.R1 2/11 Page 5 www.protekdevices.com 05305 Only One Name Means ProTek’Tion™ SRV05-4LC taPe and ReeL P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 K0 Pin 1 F W B0 P User Direction of Feed SPeCiFiCationS ReeL dia. 178mm (7”) 1. 2. 3. 4. taPe width 8mm a0 B0 k0 d e F w P0 P2 P tmax 0.25 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 noteS Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06013.R5 2/11 oRdeRing inFoRmation BaSe PaRt numBeR SRV05-4LC LeadFRee SuFFiX n/a taPe SuFFiX -T7 Qty/ReeL 3,000 ReeL SiZe 7” tuBe Qty n/a 05305.R1 2/11 Page 6 www.protekdevices.com 05305 Only One Name Means ProTek’Tion™ SRV05-4LC ComPany inFoRmation ComPany PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ContaCt uS Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2008 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05305.R1 2/11 Page 7 www.protekdevices.com