TSMDA15CM

05115 Only One Name Means ProTek’Tion™ TSMDA05CM - TSMDA24CM 500 WATT MULTI-LINE TVS ARRAY DESCRIPTIoN The TSMDAxxCM Series are monolithic transient voltage suppressor arrays that provides board level protection for standard TTL and MOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. The TSMDAxxCM Series has a peak pulse power rating of 500 Watts for an 8/20µs waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. MSoP-8 PACkAGE FEATURES • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(LineGnd) & Level 2(Line-Line) • 500 Watts Peak Pulse Power per Line (tp = 8/20µs) • Bidirectional Configuration • Available in Multiple Voltages Ranging from 5V to 24V • Protects 4-7 Lines • ESD Protection > 25 kilovolts • Monolithic Design • RoHS Compliant • REACH Compliant APPLICATIoNS • • • • RS-232, RS-422 & RS-423 Data Lines Microprocessor Based Equipment Control & Monitoring Systems Portable Electronics MEChANICAL ChARACTERISTICS • • • • Molded JEDEC MSOP-8 Package Approximate Weight: 24 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CoNFIGURATIoN 8 7 6 5 1 2 3 4 05115.R5 2/11 Page 1 www.protekdevices.com 05115 Only One Name Means ProTek’Tion™ TSMDA05CM - TSMDA24CM TYPICAL DEVICE ChARACTERISTICS MAXIMUM RATINGS @ 25°C Unless otherwise Specified PARAMETER Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 SYMBoL TL TSTG PPP VALUE -55 to 150 -55 to 150 500 UNITS °C °C Watts ELECTRICAL ChARACTERISTICS PER LINE @ 25°C Unless otherwise Specified PART NUMBER DEVICE MARkING RATED STAND-oFF VoLTAGE MINIMUM BREAkDoWN VoLTAGE @1mA V(BR) VoLTS 6.0 8.5 13.4 16.7 26.7 MAXIMUM CLAMPING VoLTAGE (Fig. 2) @I P = 1A VC VoLTS 9.8 13.4 19.0 24.0 43.0 MAXIMUM CLAMPING VoLTAGE (Fig. 2) @ 8/20µs VC @ IPP 19.0V @ 30.0A 23.7V @ 24.0A 29.2V @ 20.0A 31.1V @ 18.0A 45.0V @ 13.0A MAXIMUM LEAkAGE CURRENT @V WM ID µA 100 10 1 1 1 MAXIMUM CAPACITANCE VWM VoLTS TSMDA05CM TSMDA08CM TSMDA12CM TSMDA15CM TSMDA24CM REJ REK REL REM REN 5.0 8.0 12.0 15.0 24.0 @0V, 1Mhz C pF 350 300 150 100 63 05115.R5 2/11 Page 2 www.protekdevices.com 05115 Only One Name Means ProTek’Tion™ TSMDA05CM - TSMDA24CM TYPICAL DEVICE ChARACTERISTICS FIGURE 1 PEAk PULSE PoWER VS PULSE TIME 10,000 PPP - Peak Pulse Pwer - Watts 1,000 500W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGURE 2 PULSE WAVE FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % of Rated Power FIGURE 3 PoWER DERATING CURVE Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - Time - µs 20 25 30 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 05115.R5 2/11 Page 3 www.protekdevices.com 05115 Only One Name Means ProTek’Tion™ TSMDA05CM - TSMDA24CM MSoP-8 PACkAGE INFoRMATIoN oUTLINE DIMENSIoNS DIM A B C D E F G J K M N 1. 2. 3. 4. 5. 6. A MILLIMETERS MIN 2.90 4.80 2.90 0.05 0.16 0° 0.09 0.45 INChES MIN 0.114 0.189 0.114 0.002 0.006 0° 0.004 0.018 MAX 0.65 BSC 3.10 5.00 3.10 1.10 0.25 0.32 0.95 6° 0.24 0.55 MAX 8 5 B 1 4 C 0.122 0.197 0.122 0.044 0.010 0.013 0.037 6° 0.009 0.022 0.026 BSC D E K J G F N M NoTES -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. PAD LAYoUT DIMENSIoNS DIM A B C D E NoTES 0.41 5.84 1.02 3.56 A B MILLIMETERS MIN MAX 0.66 BSC 0.51 1.27 - INChES MIN 0.016 0.230 0.040 0.140 MAX 0.020 0.050 - 0.026 BSC E C D 1. Controlling dimension: inches. 05115.R5 2/11 Page 4 www.protekdevices.com 05115 Only One Name Means ProTek’Tion™ TSMDA05CM - TSMDA24CM TAPE AND REEL P0 t D 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E Pin 1 F W K0 B0 A0 P User Direction of Feed SPECIFICATIoNS REEL DIA. 178mm (7”) 1. 2. 3. 4. 5. TAPE WIDTh 12mm A0 B0 k0 D E F W P0 P2 P tmax 0.25 5.30 ± 0.20 3.40 ± 0.10 1.40 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 8.00 ± 0.10 NoTES Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape. Bulk product shipped in tubes of 100 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. Package outline, pad layout and tape specifications per document number 06046.R1 2/11. oRDERING INFoRMATIoN BASE PART NUMBER (xx = Voltage) TSMDAxxCM LEADFREE SUFFIX -LF TAPE SUFFIX -T7 QTY/REEL 1,000 REEL SIZE 7” TUBE QTY 100 05115.R5 2/11 Page 5 www.protekdevices.com 05115 Only One Name Means ProTek’Tion™ TSMDA05CM - TSMDA24CM CoMPANY INFoRMATIoN CoMPANY PRoFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CoNTACT US Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05115.R5 2/11 Page 6 www.protekdevices.com