USB50805

05322 Only One Name Means ProTek’Tion™ USB50803 - USB50824C 500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The USB508xx and USB508xxC Series are multi-line ultra low capacitance transient voltage suppressor arrays that provide board level protection for computing and telecommunications applications against the damaging effects of ESD, tertiary lightning and switching transients. The USB508xx and USB508xxC Series has a peak pulse power rating of 500 Watts for an 8/20µs waveshape. This device series meets the IEC 61000-4-2 requirements. SO-8 PACkAGE FEATURES • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 500 Watts Peak Pulse Power per Line (tp = 8/20µs) Unidirectional and Bidirectional Configurations Available in Multiple Voltages Ranging from 3V to 24V Ultra Low Capacitance: 3pF RoHS Compliant REACH Compliant APPLICATIONS • • • • Ethernet - 10/100/1000 Base T Computing Interfaces xDSL Interfaces Cellualr Phone Terminals MEChANICAL ChARACTERISTICS • • • • Molded JEDEC SO-8 Package Approximate Weight: 70 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0 PIN CONFIGURATIONS 8 7 6 5 8 7 6 5 1 2 3 UNIDIRECTIONAL 4 1 2 3 BIDIRECTIONAL 4 05322.R2 11/10 Page 1 www.protekdevices.com 05322 Only One Name Means ProTek’Tion™ USB50803 - USB50824C TYPICAL DEVICE ChARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 SYMBOL TL TSTG PPP VALUE -55 to 150 -55 to 150 500 UNITS °C °C Watts ELECTRICAL ChARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1-5) DEVICE MARkING RATED STAND-OFF VOLTAGE MINIMUM BREAkDOWN VOLTAGE @1mA V(BR) VOLTS 4.5 4.5 6.0 6.0 13.3 13.3 16.7 16.7 26.7 26.7 MAXIMUM CLAMPING VOLTAGE (Fig. 2) @I P = 1A VC VOLTS 8.0 8.0 10.8 10.8 19.0 19.0 24.0 24.0 43.0 43.0 MAXIMUM CLAMPING VOLTAGE (Fig. 2) @I P = 5A VC VOLTS 11.0 11.0 13.0 13.0 26.0 26.0 32.0 32.0 57.0 57.0 MAXIMUM LEAkAGE CURRENT @V WM ID µA 125 125 20 20 1 1 1 1 1 1 MAXIMUM CAPACITANCE VWM VOLTS USB50803 USB50803C USB50805 USB50805C USB50812 USB50812C USB50815 USB50815C USB50824 USB50824C 1. 2. 3. 4. 5. @0V, 1Mhz C pF 3 3 3 3 3 3 3 3 3 3 GA UGA GB UGB GC UGC GD UGD GE UGE 3.3 3.3 5.0 5.0 12.0 12.0 15.0 15.0 24.0 24.0 NOTES Part numbers with a “C” suffix are bidirectional devices, i.e., USB50803C. Do not apply sureg in the forward direction of the TVS. PIV typically greater than 100V for each rectifier diode. Electrical characteristics apply to pins 8 to 1, 2 to 7, 6 to 3 and 4 to 5 for the bidirectional configuration. Electrical characteristics apply to pins 7 to 2 and 5 to 4 for the unidirectional configuration. 05322.R2 11/10 Page 2 www.protekdevices.com 05322 Only One Name Means ProTek’Tion™ USB50803 - USB50824C TYPICAL DEVICE ChARACTERISTICS FIGURE 1 PEAk PULSE POWER VS PULSE TIME 10,000 PPP - Peak Pulse Power - Watts 1,000 500W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 IPP - Peak Pulse Current - % of IPP FIGURE 2 PULSE WAVE FORM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % Of Rated Power FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - Time - µs 20 25 30 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 05322.R2 11/10 Page 3 www.protekdevices.com 05322 Only One Name Means ProTek’Tion™ USB50803 - USB50824C SO-8 PACkAGE INFORMATION OUTLINE DIMENSIONS DIM A B C D F G J K P R 1. 2. 3. 4. 5. 6. -A- MILLIMETERS MIN 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 0.25 0.25 6.20 0.50 INChES MIN 0.189 0.150 0.054 0.014 0.016 0.05 BSC 0.007 0.004 0.229 0.010 0.009 0.008 0.244 0.019 K + 0.010” (0.25mm) M T B S A S 8 PL -TJ F MAX 5.00 4.00 1.75 0.49 1.25 MAX 0.196 0.157 0.068 0.019 0.049 G 8 5 -BP + 0.010” (0.25mm) M B M 4 PL 1 4 D C R x 45° 0° - 10° NOTES -T- = Seating plane and datum surface. Dimensions “A” and “B” are datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. PAD LAYOUT DIMENSIONS DIM A B C D E NOTES A B MILLIMETERS MIN 1.14 0.64 6.22 3.94 1.02 INChES MIN 0.045 0.025 0.245 0.155 0.040 MAX 1.40 0.89 4.17 1.27 MAX 0.055 0.035 0.165 0.050 E D C 1. Controlling dimension: inches. 05322.R2 11/10 Page 4 www.protekdevices.com 05322 Only One Name Means ProTek’Tion™ USB50803 - USB50824C TAPE AND REEL P0 t D 10 Pitches Cumulative Tolerance on tape ± 0.2 P2 E Pin 1 F W K0 B0 A0 P User Direction of Feed SPECIFICATIONS REEL DIA. 178mm (7”) 1. 2. 3. 4. 5. 6. TAPE WIDTh 12mm A0 B0 k0 D E F W P0 P2 P tmax 0.25 6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 NOTES Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape. Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape. Bulk product shipped in tubes of 98 pieces per tube. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package. Package outline, pad layout and tape specifications per document number 06011.R4 8/10. ORDERING INFORMATION BASE PART NUMBER (xx = Voltage) USB0508xx/USB0508xxC USB0508xx/USB0508xxC LEADFREE SUFFIX n/a n/a TAPE SUFFIX -T7 -T13 QTY/REEL 1,000 2,500 REEL SIZE 7” 13” TUBE QTY 98 98 05322.R2 11/10 Page 5 www.protekdevices.com 05322 Only One Name Means ProTek’Tion™ USB50803 - USB50824C COMPANY INFORMATION COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2009 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05322.R2 11/10 Page 6 www.protekdevices.com