VS10P03LC

05120 Only One Name Means ProTek’Tion™ VS10P03LC Low CaPaCitanCe VSiP® tVS aRRay DeSCRiPtion The VS10P03LC is a low voltage, low capacitance TVS array available in a 10 pin VSIP package. This device is designed to protect telecommunications equipment from the damaging effects of ESD, EFT and secondary transient threats. The VS10P03LC has a peak pulse power rating of 300 Watts for an 8/20µs waveshape. This device meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. 10 Pin VSiP® PaCkaGe FeatuReS • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line) • 300 Watts Peak Pulse Power per Line (tp = 8/20µs) • Bidirectional Configuration • ESD Protection > 25 kilovolts • Protects 4 Bidirectional Lines • Low Capacitance: 15pF • RoHS Compliant • REACH Compliant aPPLiCationS • • • • • RS-232 & RS-485 Data Lines ATM Circuit Interfaces xDSL Interfaces Ethernet & Token Ring I/O Port Protection MeChaniCaL ChaRaCteRiStiCS • • • • Molded 10 Pin Plastic VSIP® Package Approximate Weight: 1.5 grams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 Pin ConFiGuRation 05120.R4 11/10 Page 1 www.protekdevices.com 05120 Only One Name Means ProTek’Tion™ VS10P03LC tyPiCaL DeViCe ChaRaCteRiStiCS MaXiMuM RatinGS @ 25°C unless otherwise Specified PaRaMeteR Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SyMBoL PPP TL TSTG VaLue 300 -55 to 150 -55 to 150 unitS Watts °C °C SeRieS “a” eLeCtRiCaL ChaRaCteRiStiCS PeR Line @ 25°C unless otherwise Specified PaRt nuMBeR (note 1) RateD StanD-oFF VoLtaGe MiniMuM BReakDown VoLtaGe @1ma V(BR) VoLtS 4.5 MaXiMuM CLaMPinG VoLtaGe (Fig. 2) @ iP = 5a VC VoLtS 9.0 MaXiMuM LeakaGe CuRRent @V wM iD µa 125 MaXiMuM CaPaCitanCe VwM VoLtS VS10P03LC noteS 3.3 @ 0V, 1Mhz C pF 15 1. Do not surge from pins 2 to 1, 1 to 3, 4 to 1, 1 to 5, 6 to 1, 1 to 7, 8 to 1 and 1 to 9. PIV typically greater than 100 Volts for each rectifier diode. 05120.R4 11/10 Page 2 www.protekdevices.com 05120 Only One Name Means ProTek’Tion™ VS10P03LC tyPiCaL DeViCe ChaRaCteRiStiCS FiGuRe 1 Peak PuLSe PoweR VS PuLSe tiMe 10,000 PPP - Peak Pulse Power - watts 1,000 300W, 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 120 iPP - Peak Pulse Current - % of iPP FiGuRe 2 PuLSe waVe FoRM tf Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 80 % of Rated Power FiGuRe 3 PoweR DeRatinG CuRVe Peak Pulse Power 8/20µs 100 80 60 40 20 0 0 5 e-t 60 40 20 0 Average Power td = t/(IPP/2) 10 15 t - time - µs 20 25 30 0 25 50 75 100 125 ta - ambient temperature - °C 150 05120.R4 11/10 Page 3 www.protekdevices.com 05120 Only One Name Means ProTek’Tion™ VS10P03LC 10 Pin VSiP PaCkaGe inFoRMation outLine DiMenSionS DiM A B C D E F G H I J K L noteS K I MiLLiMeteRS Min 25.65 5.68 5.92 0.406 1.27 2.49 0.38 2.65 7° TYP 1.47 0.20 0.81 inCheS Min 1.01 0.244 0.233 0.016 0.05 0.098 0.015 0.104 7° TYP 0.058 0.008 0.032 MaX 26.01 6.45 6.73 0.508 1.65 2.59 1.40 3.17 7° TYP 1.98 0.30 1.57 MaX 1.024 0.254 0.265 0.020 0.065 0.102 0.055 0.125 7° TYP 0.078 0.012 0.062 L J H C D B E A 1. Dimensions are exclusive of mold flash and metal burrs. 2. Controlling dimensions in inches. F G oRDeRinG inFoRMation BaSe PaRt nuMBeR VS10P03LC noteS LeaDFRee SuFFiX -LF taPe SuFFiX n/a Qty/ReeL n/a ReeL SiZe n/a tuBe Qty 18 1. Marking on Part - logo, part number, date code and pin one defined by dot on top of package. Package outline per document number 06017.R2 9/09 05120.R4 11/10 Page 4 www.protekdevices.com 05120 Only One Name Means ProTek’Tion™ VS10P03LC CoMPany inFoRMation CoMPany PRoFiLe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ContaCt uS Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05120.R4 11/10 Page 5 www.protekdevices.com