VSB06P05LCI_11

05062 Only One Name Means ProTek’Tion™ VSB06P05LCI hIgh PoweRed VSIP® tVS aRRay deSCRIPtIon The VSB06P05LCI is a high powered, low capacitance TVS array available in a 6 pin VSIP package. This device is designed to protect telecommunications equipment from the damaging effects of ESD, EFT and secondary transient threats. The VSB06P05LCI has a peak pulse power rating of 600 Watts for an 10/1000µs waveshape. This device meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. 6 PIn VSIP® PaCkage FeatuReS • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 8/20µs, 95A - Level 4(LineGnd) & 48A, Level 4(Line-Line), 83A Level 2 (Power) • 600 Watts Peak Pulse Power per Line (tp = 10/1000µs) • 100A (2/10µs) per Bellcore GR-1089 (Intra Building) • ESD Protection > 25 kilovolts • High Surge Capability • Low Capacitance: < 50pF • RoHS Compliant • REACH Compliant aPPLICatIonS • • • • • • RS-232 & RS-423 Data Lines T1/E1 & T3/E3 ATM Circuit Interfaces xDSL Interfaces Cable Modem Intra-Structure Protection V.34/V.90 MeChanICaL ChaRaCteRIStICS • • • • Molded 6 Pin Plastic VSIP® Package Approximate Weight: 1.5 grams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 PIn ConFIguRatIon 05062.R7 1/11 Page 1 www.protekdevices.com 05062 Only One Name Means ProTek’Tion™ VSB06P05LCI tyPICaL deVICe ChaRaCteRIStICS MaXIMuM RatIngS @ 25°C unless otherwise Specified PaRaMeteR Peak Pulse Power (tp = 10/1000µs) - See Figure 1 Operating Temperature Storage Temperature SyMBoL PPP TL TSTG VaLue 600 -55 to 150 -55 to 150 unItS Watts °C °C SeRIeS “a” eLeCtRICaL ChaRaCteRIStICS PeR LIne @ 25°C unless otherwise Specified PaRt nuMBeR (note 1) Rated Stand-oFF VoLtage MInIMuM BReakdown VoLtage @1ma V(BR) VoLtS 6.0 MaXIMuM CLaMPIng VoLtage (Fig. 2) @ IP = 10a VC VoLtS 12.5 MaXIMuM CLaMPIng VoLtage (Fig. 2) @ 10/1000µs VC @ IPP 16.5V @ 36.0A MaXIMuM Leakage CuRRent @V wM Id µa 300 MaXIMuM CaPaCItanCe VwM VoLtS VSB06P05LCI noteS 5.0 @ 0V, 1Mhz Cj pF 50 1. Do not surge from pins 2 to 1, 1 to 3, 4 to 6 or 6 to 5. PIV typically greater than 100 Volts for each rectifier diode. For circuit applications, external pins 2, 3, 4 and 5 are not connected. 05062.R7 1/11 Page 2 www.protekdevices.com 05062 Only One Name Means ProTek’Tion™ VSB06P05LCI tyPICaL deVICe ChaRaCteRIStICS FIguRe 1 Peak PuLSe PoweR VS PuLSe tIMe 100 PPP - Peak Pulse Power - kilowatts 10 1 600W, 10/1000µs Waveform 0.1 0.1 1 10 100 td - Pulse duration - µs 1,000 10,000 100,000 FIguRe 2 PuLSe waVeFoRM tf IPP - Peak Pulse Current - % of IPP 100 100 FIguRe 3 PoweR deRatIng CuRVe TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs Peak Pulse Power 10/1000µs 80 % of Rated Power Peak Value IPP td = t/(IPP/2) 50 60 40 20 e 0 0 1 -t 2 t - time - ms 3 0 0 25 50 75 100 125 150 tL - Lead temperature - °C 05062.R7 1/11 Page 3 www.protekdevices.com 05062 Only One Name Means ProTek’Tion™ VSB06P05LCI SPICe ModeL FIguRe 1 SPICe ModeL I/O ABD LCRD LCRD Lg 0.4nH ABD ABD - Avalanche Breakdown Diode (TVS) LCRD: Low Capacitance Rectifier Diode Lg - Lead Inductance taBLe 1 - SPICe PaRaMeteRS PaRaMeteR BV IBV Cjo IS Vj M N RS TT EG unIt V µA pF A V Ohms s eV aBd(tVS) See Table 2 1 See Table 2 See Table 2 0.6 0.33 1 See Table 2 1E-8 1.11 LCRd 200 0.01 5 1E-13 0.6 0.33 1 0.31 1E-9 1.11 PaRt nuMBeR VSB06P05LCI taBLe 2 - aBd SPeCIFIC SPICe PaRaMeteRS I S (aMPS) BV(VoLtS) Cjo(pF) 6.0 3000 1E-11 Rs(ohMS) 0.075 05062.R7 1/11 Page 4 www.protekdevices.com 05062 Only One Name Means ProTek’Tion™ VSB06P05LCI 6 PIn VSIP PaCkage InFoRMatIon outLIne dIMenSIonS dIM A B C D E F G H I J K L noteS K I MILLIMeteRS MIn 18.92 5.68 5.92 0.406 1.27 2.49 0.38 3.05 7° TYP 1.78 0.20 1.52 InCheS MIn 0.745 0.244 0.233 0.016 0.05 0.098 0.015 0.120 7° TYP 0.070 0.008 0.060 MaX 20.57 6.45 6.73 0.508 1.65 2.59 1.40 3.81 7° TYP 2.03 0.30 1.78 MaX 0.810 0.254 0.265 0.020 0.065 0.102 0.055 0.150 7° TYP 0.080 0.012 0.070 L J H C B D A E 1. Dimensions are exclusive of mold flash and metal burrs. 2. Controlling dimensions in inches. F G oRdeRIng InFoRMatIon BaSe PaRt nuMBeR VSB06P05LCI noteS LeadFRee SuFFIX -LF taPe SuFFIX n/a Qty/ReeL n/a ReeL SIZe n/a tuBe Qty 25 1. Marking on Part - logo, part number, date code and pin one defined by dot on top of package. Package outline per document number 06016.R2 1/11. 05062.R7 1/11 Page 5 www.protekdevices.com 05062 Only One Name Means ProTek’Tion™ VSB06P05LCI CoMPany InFoRMatIon CoMPany PRoFILe ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. ContaCt uS Corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05062.R7 1/11 Page 6 www.protekdevices.com