VSMF05LC-P-T13

05257 VSMF05LC LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ ✔ ✔ ✔ ✔ Computer Notebooks Communication Systems & Cellular Phones Printers Personnal Digital Assitant(PDA) Video Equipment IEC COMPATIBILITY ( EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns SOT-953 FEATURES ✔ 25 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Monolithic Structure ✔ Available in 5 Volts ✔ Low Clamping Voltage ✔ ESD Protection > 40 kilovolts ✔ Low Leakage Current ✔ Low Capacitance: 9pF ✔ Protects Four (4) Unidirectional Lines ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SOT-953 Package Weight 3 milligrams (Approximate) Available in Lead-Free Nickel-Paladium-Gold Plating Solder Reflow Temperature: Nickel-Paladium-Gold (Ni/Pd/Au) Sn/Ag/Cu: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 1 2 3 5 4 05257.R1 11/06 1 www.protekdevices.com VSMF05LC DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Maximum Forward Voltage @ 10mA SYMBOL PPP TJ TSTG VF VALUE 25 -55°C to 150°C -55°C to 150°C 1.0 UNITS Watts °C °C V ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE @ 25°C Unless Otherwise Specified MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE (See Note 1) V WM VOLTS VSMF05LC 5A 5.0 @ 1mA V(BR) VOLTS 6.0 @8/20µs VC @ IPP 12.0V @ 2.0A @VWM ID µA 1 0V @ 1 MHz C pF 9 Note 1: Pins 1, 3, 4, 5, or 6 to pin 2. FIGURE 1 PEAK PULSE POWER VS PULSE TIME 1,000 IPP - Peak Pulse Current - % of IPP PPP - Peak Pulse Current - Watts 120 100 80 60 40 20 0 tf FIGURE 2 PULSE WAVE FORM Peak Value IPP TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs 100 25W, 8/20µs Waveform e-t 10 td = t I /2 PP 1 0.01 1 10 100 td - Pulse Duration - µs 1,000 10,000 0 5 10 15 t - Time - µs 20 25 30 05257.R1 11/06 2 www.protekdevices.com VSMF05LC GRAPHS 100 80 % Of Rated Power FIGURE 3 POWER DERATING CURVE Peak Pulse Power 8/20µs 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C 150 16 VC - Clamping Voltage - Volts FIGURE 4 TYPICAL CLAMPING VOLTAGE VS PEAK PULSE CURREN 12 8 4 0 0 2 4 6 IPP - Peak Pulse Current - Amps 8 10 05257.R1 11/06 3 www.protekdevices.com VSMF05LC SOT-953 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-953 A 5 4 C K PACKAGE DIMENSIONS B 1 2 3 S DIM A B C D G J K S MILLIMETERS MIN MAX 0.95 0.75 0.40 0.10 0.35 0.05 0.05 0.95 1.05 0.80 0.50 0.20 0.40 0.15 0.15 1.05 INCHES MIN MAX 0.037 0.029 0.019 0.004 0.014 0.002 0.002 0.037 0.041 0.034 0.020 0.008 0.016 0.006 0.006 0.041 G D J MOUNTING PAD TYPICAL DIM Millimeters Inches 1 2 3 4 5 0.20 0.70 0.35 0.90 0.20 0.008 0.028 0.014 0.035 0.008 5 1 NOTES 1. 2. 3. 4. Dimensioning and tolerances per ANSI Y14.5M, 1985. Controlling Dimension: Inches Pin 3 is the cathode (Unidirectional Only). Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 2 4 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., VSMF05LC-P-T7. 3. Suffix -T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., VSMF05LC-P-T13. 4. Suffix -P = Lead-Free, Nickel-Paladium-Gold Platin, i.e., VSMF05LC-P-T7. Outline & Dimensions: Rev 0 - 9/06, 06061 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7”) Tape Width 8mm A0 B0 K0 D E F W P0 P2 P tmax 0.25 1.17 ± 0.05 1.17 ± 0.05 0.66 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 3 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot P F W User Direction of Feed COPYRIGHT © ProTek Devices 2006 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com www.protekdevices.com 05257.R1 11/06 4