J3026G01D

PULSEJACK Description: TM Surface Mount 1x1 10/100Base-TX surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDs Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network Interface Cards (NIC). Features and Benefits: RoHS-5 peak reflow temperature rating 235°C RoHS-6 peak reflow temperature rating 245°C SMT Contacts JV0 J0C SMT product, reduced size and low cost alternative to JV series Electrical Performance Summary: Meets IEEE 802.3 specification High performance for maximum EMI suppression J0C J30 Minimum 1500Vrms isolation per IEEE 802.3 requirement Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C RoHS-5 3 Compliant Part No. J0C-0003 J0C-0004 J0C-0005 J0C-0006 JV006I21 JV011I21 JV026I21 J3006G21D J3011G21D J3018G21K J3026G01D J3026G21D _ RoHS-6 4 Compliant Part No. TX Turns Ratios RX Tab Option Up/Down 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 Down Down Down Down Down Down Down Up Up Up Up Up Up LEDs 1 L/R BST Circuit Insertion Loss TX/RX EMI Finger (dB MAX) 1-65 MHz 1-10 MHz Return Loss (dB MIN) 100Ω (± 15Ω) 30 MHz 60-80 MHz 1-10 MHz Crosstalk (dB MIN) 30-60 MHz 60-100 MHz Common Mode Hipot Rejection (Vrms) (dB MIN) (MIN) 1-50 MHz 50-130 @60 Hz MHz 1 MIN J0C-0003NL J0C-0004NL J0C-0005NL J0C-0006NL JV006I21NL JV011I21NL JV026I21NL J3006G21DNL J3011G21DNL _ J3026G01DNL J3026G21DNL JX30-0005NL5 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CTS:1 1CT:1 1CT:1 1CTS:1.414 1CTS:1 1CTS:1 1CT:1 No No No No No No No G/Y G/Y G/G G/Y G/Y G/Y No No Yes Yes No Yes Yes No Yes Yes Yes Yes Yes No Yes No Yes Yes Yes Yes Yes Yes Yes No Yes Yes -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -18 -18 -18 -18 -20 -20 - 20 -20 -20 -20 -20 -20 -20 -14 -14 -14 -14 -16 -16 -16 -16 -16 -16 -16 -16 -16 -10 -10 -10 -10 -12 -12 -12 -12 -12 -11.5 -12 -12 -12 -35 -35 -35 -35 -40 -40 -40 -40 -40 -40 -40 -40 -40 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -20 -20 -20 -20 -30 -30 -30 -30 -30 -30 -30 -30 -30 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 NOTES: 1. LEDs Left/Right: G = green; Y = yellow. 4. RoHS-6 - Product does not contain 5 out of the 6 banned substances 2. Add suffix “T” for Tape & Reel option (e.g. J0C-0004T). specified in the RoHS directive. Some internal connections may contain 3. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in lead in high temperature solder (solder alloys containing more than 85% lead). the RoHS directive. Product contains lead in applications considered as solders. 5. Extended Temperature: -40° to 85° C RJ45 Durability Testing Rating Part Number J0C/JV/J3 Series Mating Force (MAX) 5 lbs./2.268 kgs. Unmating Force (MAX) 5 lbs./2.268 kgs. Durability 750 Insertions Plug to Jack Retention (MIN) 20 lbs./9.072 kgs. RJ45 Material Specification Part Number J0C/JV/J3 Series Material Brass Shield Finish 20-40µ inches thick nickel over Brass Material Phosphor Bronze Contact 3 Plating Area (X)µ inches gold over 30-80µ inches nickel Solder Area 5 Housing Material Specification High Temp. Thermoplastic UL 94 V-0 MSL Rating 14 2 75-300µ inches tin-lead over 30-80µ inches nickel Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements. 2. MSL=Moisture Sensitivity Level rating: 1-5 (highest rating = 1, lowest rating = 5). 3. (X)=30µ inches gold for JV and J30 platforms and 15µ inches gold for J0C platform. 4. The MSL rating for J0C-000X is Level 4. All other connectors are Level 1. 5. NL parts are tin matte finish over nickel. USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 1 J409.G (12/07) PULSEJACK J0C-0003/4 TM Surface Mount 1x1 J0C Platform Schematics J0C-0005/6 TD+ 1 CT 4 TD- 2 1 TX+ TD+ 1 CT 4 75 1 TX+ PCB SIDE TO PHY PCB SIDE TO PHY 1CT : 1 TRANSMIT 2 TX3 RX+ TD- 2 RD+ 3 CT 5 1CT : 1 TRANSMIT 2 TX3 RX+ CT 5 RD- 6 6 RX- CABLE SIDE 75 RD- 6 1CT : 1 RECEIVE 1CT : 1 RECEIVE 6 RX4 75 4 5 7 NC 7 NC 7 5 7 GND* 8 *Connecting pin 8 to Ground makes J00-0042/46/64/66 footprint compatible to J00-0014/45/61/65. 8 GND 8 0.001mF 75 8 NOTE: Connect GND to PCB ground. USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 2 J409.G (12/07) CABLE SIDE RD+ 3 PULSEJACK JV006 TM Surface Mount 1x1 JV Platform Schematics JV011 P C B side to P H Y P C B side to P H Y JV026 P C B side to P H Y CABLE USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 3 CABLE J409.G (12/07) CABLE PULSEJACK J3006 TM Surface Mount 1x1 J3 Platform Schematics J3011 P C B side to P H Y P C B side to P H Y CABLE J3018/J3026 J3026 JX30-0005NL P C B side to P H Y P C B side to P H Y CABLE J3018 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 4 J409.G (12/07) CABLE CABLE PULSEJACK TM Surface Mount 1x1 J0C Platform Mechanicals J0C-0004/6 (J0C-0003/5 - Same platform without EMI Fingers) EMI Fingers EMI Fingers USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 5 J409.G (12/07) PULSEJACK JV Series TM Surface Mount 1x1 JV Platform Mechanicals JV0XX121 Date Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 6 J409.G (12/07) PULSEJACK J3 Series TM Surface Mount 1x1 J3 Platform Mechanical J30XXGX1D Date Code Country of Origin JX30-0005NL & J3026G21D With EMI Tabs J30-0005NL J3026G21D Date Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 7 J409.G (12/07) PULSEJACK TM Surface Mount 1x1 J0C Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics Modules has been specifically designed for the implementation of a 10Base-T and 100Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5e and 6). The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. The JC0 series meets the stringent open circuit inductance requirements imposed by IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350µH. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with minimal attenuation and fast rise times to minimize system level jitter. The 1X1 SMT RJ45 connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10mm (0.004") NOTE: Modules are packaged in trays, unless Tape & Reel is specified. Please add the suffix "T" for Tape & Reel orders (ex: J0C-0003T). Add the suffix “NL” for RoHS compliant parts (ex: J0C-0003NL for Trays and J0C-0003NLT for Tape & Reel). 10/100 IC PHY VCC 0.01 µf NC NC J0C-003/4 Connector 8 7 6 5 4 3 2 1 TX 1:1 RX 1:1 Shield PCB PAD TPOR 50W * 2 0.01 µf RXNC TXCT RX+ 50W * 2 TXTX+ 0.01 µf TPOR + TPOP - 8 7 6 5 4 3 2 1 RJ45 TPIP + Shield PCB PAD 0.01 µf Analog GND PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50Ω connections. Chassis GND NOTE: Connector design not to scale 2. Connections to ground should be as short as possible. 3. Connections between the 10/100 IC and the SMT connector should be direct (ideally no change in direction) and of minimum length. USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 8 J409.G (12/07) PULSEJACK TM Surface Mount 1x1 JV Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics Modules has been specifically designed for the implementation of a 10Base-T and 100Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5e and 6). The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. The JV series meets the stringent open circuit inductance requirements imposed by IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350µH. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with minimal attenuation and fast rise times to minimize system level jitter. The 1X1 SMT RJ45 connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10mm (0.004") NOTE: Modules are packaged in trays, unless Tape & Reel is specified. Please add the suffix "T" for Tape & Reel orders (ex: JV006I21T). Add the suffix “NL” for RoHS compliant parts (ex: JV006I21NL for Trays and JV006I21NLT for Tape & Reel). 10/100 IC PHY VCC 0.01 µf JV006I21 Connector Shield PCB PAD TPOR - NC 50W * 2 0.01 µf RXRX+ TX50W * 2 TX+ TXCT 0.01 µf 6 5 4 3 2 1 TX 1:1 RX 1:1 TPOR + TPOP - 8 7 6 5 4 3 2 1 RJ45 TPIP + Shield PCB PAD 0.01 µf Analog GND PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50Ω connections. Chassis GND NOTE: Connector design not to scale 2. Connections to ground should be as short as possible. 3. Connections between the 10/100 IC and the SMT connector should be direct (ideally no change in direction) and of minimum length. USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 9 J409.G (12/07) PULSEJACK J0C Series TM Surface Mount 1x1 J0C Packaging Specifications Weight ..............7.07 grams Tape & Reel ............90/reel Tray ........................80/tray Tape ...................44x32mm Tube ......................25/tube Tape and Reel Specification Tray Specification USA 858 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 10 J409.G (12/07) PULSEJACK JV Series TM Surface Mount 1x1 JV Packaging Specifications Weight ...............6.6 grams Tape & Reel ..........150/reel Tray ........................45/tray Tape ...................44x32mm Tape and Reel Specification Tray Specification USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211/2 • China 86 769 85538070 • Taiwan 886 3 4641811 www.pulseeng.com 11 J409.G (12/07) PULSEJACK J3 Series TM Surface Mount 1x1 J3 Packaging Specifications Tape and Reel Specification Weight ...............8.1 grams Tape & Reel ............75/reel Tray ........................45/tray Tape ...................56x32mm Tray Specification For More Information: Pulse Worldwide Headquarters 12220 World Trade Dr. San Diego, CA 92128 U.S.A. www.pulseeng.com Tel: 858 674 8100 Fax: 858 674 8262 Pulse Europe Einsteinstrasse 1 D-71083 Herrenberg Germany Pulse China Headquarters B402, Shenzhen Tech-Innovation International Tenth Kejinan Rd. High-Tech Industrial Park Nanshan District, Shenzhen China Tel: 86 755 33966678 Fax: 86 755 33966700 Pulse North China Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China Tel: 86 21 54643211/2 Fax: 86 21 54643210 Pulse South Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 Pulse North Asia No. 26 Kao Ching Rd. Yang Mei Chen Tao Yuan Hsien Taiwan, R. O. C. Tel: 886 3 4641811 Fax: 886 3 4641911 Tel: 49 7032 7806 0 Fax: 49 7032 7806 12 Tel: 65 6287 8998 Fax: 65 6280 0080 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2007. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com J409.G (12/07)