ASM3P2856AG-16-TR

November 2006 rev0.1 Custom Clock generator for LCD Projector Features • • • • ASM3P2856A ASM3P2856B Product Description ASM3P2856A/B generate the required four custom clock frequencies for the LCD Projector. An inexpensive 14.7456MHz crystal is used to generate a 14.7456MHz used by the microcomputer, a 27MHz used by Video, a non-spread 65MHz, and a centre spread 65MHz clock used by the LCD projector system. The spread spectrum clock (± 20 ppm) has +/- 0.5% or +/- 1% spread options. The spread spectrum clock of ASM3P2856A/B reduces electromagnetic interference (EMI) at the clock source. This allows significant system cost savings by reducing the number of circuit board layers and shielding that are required to pass EMI regulations. Custom Clock Generator for LCD Projector Generates EMI optimized clock signals for LCD Projector system Uses an inexpensive 14.7456 MHz crystal for generating the required Outputs Frequency outputs: • CLK1 : 27.002MHz • CLK2 : 14.7456MHz (Zero ppm) • CLK3 : 65MHz (± 15 ppm) • CLK4,CLK5 : 65MHz (±15 ppm) Spread Spectrum Clock • ASM3P2856A: +/- 1% centre spread ASM3P2856B: selectable +/-1.0% & +/-1.5% Centre Spread option • • • Applications ASM3P2856A/B is targeted for use in LCD Projectors. Supply voltage range 3.3V ± 0.3V. Available in 16 Pin TSSOP Available in Commercial Temperature range Block Diagram VDD SSON SS% CLK1 XIN XOUT CLK2 Crystal Oscillator PLL CLK3 CLK4 CLK5 GND PulseCore Semiconductor Corporation 1715 S. Bascom Ave Suite 200 Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018 www.pulsecoresemi.com Notice: The information in this document is subject to change without notice. November 2006 rev 0.1 Pin Configuration XIN XOUT VDD VDD GND GND CLK1 CLK2 1 2 3 4 5 6 7 8 16 15 14 13 ASM3P2856A ASM3P2856B VDD NC GND SSON SS% CLK5 CLK4 CLK3 VDD NC GND NC NC CLK5 CLK4 CLK3 XIN XOUT VDD VDD GND GND CLK1 CLK2 1 2 3 4 5 6 7 8 16 15 14 13 ASM3P2856A ASM3P2856B 12 11 10 9 12 11 10 9 Pin Description Pin# 1 2 3 4 5 6 7 8 9 10 11 12 Pin Name XIN XOUT VDD VDD GND GND CLK1 CLK2 CLK3 CLK4 CLK5 NC SS% NC Type I O P P P P O O O O O I I P P Description Connection to crystal or external reference frequency input. This pin has dual functions. It can be connected either to an external crystal or an external reference clock. Connection to crystal. If using an external reference clock, this pin must be left unconnected. Power supply for the entire Chip Power supply for the entire Chip Ground to entire chip Ground to entire chip 27.002 MHz Clock output. Refer to Input & Output Frequency Table for details. Reference Clock Output. Refer to Input & Output Frequency Table for details. 65 MHz non-spread Clock output. Refer to Input & Output Frequency Table for details. 65 MHz Spread Spectrum Clock Output. Refer to Input & Output Frequency Table for details. 65 MHz Spread Spectrum Clock Output. Refer to Input & Output Frequency Table for details. No Connection for ASM3P2856A Spread percentage selection pin for ASM3P2856B. Refer to Spread Selection Table for details. Has an internal pull down resistor No Connection for ASM3P2856A Spread spectrum selection. When SSON is HIGH, spread spectrum is enabled and when LOW, it turns off the spread spectrum. Connect the pin to ground When Spread Spectrum feature is not required. Has an internal pull up resistor. Ground to entire chip No Connection Power supply for the entire Chip 13 14 15 16 SSON GND NC VDD Custom Clock generator for LCD Project Notice: The information in this document is subject to change without notice. 2 of 8 November 2006 rev 0.1 Input & Output Clock Frequency Table Input Frequency CLK1 CLK2 CLK3 14.7456 MHz CLK4 65 MHz Spread Spectrum Clock (+/-0.5 or +/- 1%) CLK5 65 MHz Spread Spectrum Clock (+/-0.5 or +/-1%) ASM3P2856A ASM3P2856B Output Frequencies Frequency Accuracy of synthesized clocks ±20 ppm Zero ppm ±15 ppm ±15 ppm 27.002 MHz 14.7456 MHz 65 MHz Non- Spread clock ±15 ppm Spread Selection Table SS% 0 1 Spread Percentage ± 1.0% ± 1.5% Typical Application Schematic for LCD Projector + 3.3V 14.7456 MHz fundamental Crystal + 3.3V 1 2 3 XIN XOUT VDD VDD NC 16 15 GND 14 SSON 13 0.1uF 4 VDD 5 6 Make SSON Pin HIGH to enable Spread Spectrum SS% Pin selects different Spread deviations 65MHz SS Clock 65MHz SS Clock 65MHz Clock ASM3P2856B GND GND CLK1 SS% CLK5 CLK4 CLK3 12 11 10 9 27.002MHz Clock 14.7456MHz Clock 7 8 CLK2 Custom Clock generator for LCD Project Notice: The information in this document is subject to change without notice. 3 of 8 November 2006 rev 0.1 Absolute Maximum Ratings Symbol VDD VIN TSTG TA Ts TJ TDV ASM3P2856A ASM3P2856B Parameter Power Supply Voltage relative to GND Input Voltage relative to GND (Input Pins) Storage temperature Operating temperature Max. Soldering Temperature (10 sec) Junction Temperature Static Discharge Voltage (As per JEDEC STD22- A114-B) Rating -0.5 to +4.6 -0.5 to VDD+0.5 -65 to +125 0 to 70 260 150 2 Unit V °C °C °C °C KV Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect device reliability. DC Electrical Characteristics (Test condition: All parameters are measured at room temperature (+ 25°C) unless otherwise stated) Symbol VIL VIH IIL IIH IXOL IXOH VOL VOH IDD ICC VDD tON ZOUT * XIN is pulled low Parameter Input low voltage Input high voltage Input low current Input high current XOUT output low current (VXOL@0.4V, VDD=3.3V) XOUT output high current (VXOH@2.5V, VDD=3.3V) Output low voltage (VDD = 3.3V, IOL = 10mA) Output high voltage (VDD = 3.3V, IOH = 10mA) Static supply current* Dynamic supply current ( VDD =3.3V) Operating Voltage Power-up time (first locked cycle after power-up) Output impedance Min GND - 0.3 2.0 2.5 3.0 - Typ 3 3 TBD TBD 3.3 TBD Max 0.8 VDD + 0.3 -35 35 0.4 3.6 5 - Unit V V µA µA mA mA V V µA mA V mS Ω Custom Clock generator for LCD Project Notice: The information in this document is subject to change without notice. 4 of 8 November 2006 rev 0.1 AC Electrical Characteristics Symbol XIN Input frequency CLK1 CLK2 FOUT Output frequency CLK3 CLK4 (SS Clock ) CLK5 (SS Clock ) fd tLH* tHL * tJC tD Frequency Deviation (CLK4, CLK5 ) For SS% = 0 For SS% = 1 40 - ASM3P2856A ASM3P2856B Parameter Min - Typ 14.7456 27.002 14.7456 65 65 65 ± 1.0 ± 1.5 1.4 1.2 TBD 50 Max - Unit MHz MHz 60 % nS nS pS % Output rise time (measured from 0.8 to 2.0V) Output fall time (measured at 2.0V to 0.8V) Jitter (Cycle to cycle) Output duty cycle * tLH and tHL are measured into a capacitive load of 15pF Custom Clock generator for LCD Project Notice: The information in this document is subject to change without notice. 5 of 8 November 2006 rev 0.1 Package Information ASM3P2856A ASM3P2856B 16-lead Thin Shrunk Small Outline Package (4.40-MM Body) 8 1 PIN 1 ID E H 9 16 A Seating Plane θ L C e D A2 B A1 Dimensions Symbol Min A A1 A2 B C D E e H L θ 0.020 0° 0.002 0.031 0.007 0.004 0.193 0.169 0.026 BSC 0.252 BSC 0.030 8° 0.50 0° Inches Max 0.043 0.006 0.041 0.012 0.008 0.201 0.177 0.05 0.80 0.19 0.09 4.90 4.30 D Millimeters Min Max 1.20 0.15 1.05 0.30 0.20 5.10 4.50 0.65 BSC 6.40 BSC 0.75 8° Custom Clock generator for LCD Project Notice: The information in this document is subject to change without notice. 6 of 8 November 2006 rev 0.1 Ordering Codes Ordering Code ASM3P2856AG-16-TT ASM3P2856AG-16-TR ASM3P2856BG-16-TT ASM3P2856BG-16-TR ASM3P2856A ASM3P2856B Marking 3P2856AG 3P2856AG 3P2856BG 3P2856BG Package Type 16-pin 4.4-mm TSSOP - TUBE, Green 16-pin 4.4-mm TSSOP - TAPE & REEL,Green 16-pin 4.4-mm TSSOP - TUBE, Green 16-pin 4.4-mm TSSOP - TAPE & REEL,Green Operating Range Commercial Commercial Commercial Commercial Device Ordering Information ASM3P2856AG-16-TR R = Tape & Rzeel, T = Tube or Tray O = SOT S = SOIC T = TSSOP A = SSOP V = TVSOP B = BGA Q = QFN DEVICE PIN COUNT F = LEAD FREE AND RoHS COMPLIANT PART G = GREEN PACKAGE, LEAD FREE, and RoHS DEVICE NUMBER X= Automotive I= Industrial P or n/c = Commercial (-40C to +125C) (-40C to +85C) (0C to +70C) 1 = Reserved 2 = Non PLL based 3 = EMI Reduction 4 = DDR support products 5 = STD Zero Delay Buffer 6 = Power Management 7 = Power Management 8 = Power Management 9 = Hi Performance 0 = Reserved U = MSOP E = TQFP L = LQFP U = MSOP P = PDIP D = QSOP X = SC-70 PulseCore Semiconductor Mixed Signal Product Licensed under U.S Patent Nos 5,488,627 and 5,631,921 Custom Clock generator for LCD Project Notice: The information in this document is subject to change without notice. 7 of 8 November 2006 rev 0.1 ASM3P2856A ASM3P2856B PulseCore Semiconductor Corporation 1715 S. Bascom Ave Suite 200 Campbell, CA 95008 Tel: 408-879-9077 Fax: 408-879-9018 www.pulsecoresemi.com Copyright © PulseCore Semiconductor All Rights Reserved Preliminary Information Part Number: ASM3P2856A ASM3P2856B Document Version: v0.1 Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to PulseCore Semiconductor, dated 11-11-2003 © Copyright 2006 PulseCore Semiconductor Corporation. All rights reserved. Our three-point logo, our name and Intelliwatt are trademarks or registered trademarks of PulseCore. All other brand and product names may be the trademarks of their respective companies. PulseCore reserves the right to make changes to this document and its products at any time without notice. PulseCore assumes no responsibility for any errors that may appear in this document. The data contained herein represents PulseCore's best data and/or estimates at the time of issuance. PulseCore reserves the right to change or correct this data at any time, without notice. If the product described herein is under development, significant changes to these specifications are possible. The information in this product data sheet is intended to be general descriptive information for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or customer. PulseCore does not assume any responsibility or liability arising out of the application or use of any product described herein, and disclaims any express or implied warranties related to the sale and/or use of PulseCore products including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual property rights, except as express agreed to in PulseCore’s Terms and Conditions of Sale (which are available from PulseCore). All sales of PulseCore products are made exclusively according to PulseCore's Terms and Conditions of Sale. The purchase of products from PulseCore does not convey a license under any patent rights, copyrights; mask works rights, trademarks, or any other intellectual property rights of PulseCore or third parties. PulseCore does not authorize its products for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to result in significant injury to the user, and the inclusion of PulseCore products in such life-supporting systems implies that the manufacturer assumes all risk of such use and agrees to indemnify PulseCore against all claims arising from such use. Custom Clock generator for LCD Project Notice: The information in this document is subject to change without notice. 8 of 8