ASM3P623S01BF-08-ST

May 2007 rev 0.4 ASM3P623S01B/C/J Timing-Safe™ Peak EMI reduction IC General Features • • • • Clock distribution with Timing-Safe™ Peak EMI Reduction Input frequency range: 20MHz - 50MHz Zero input - output propagation delay Low-skew outputs • • • • • • • • Output-output skew less than 250pS Device-device skew less than 700pS available in 8pin package. The ASM3P623S01J is the eight-pin version with crystal interface and accepts one reference input and drives out two low-skew clocks. All parts have on-chip PLLs that lock to an input clock on the CLKIN pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad, internal to the device. Multiple ASM3P623S01B/C/J devices can accept the same input clock and distribute it. In this case, the skew between the outputs of the two devices is guaranteed to be less than 700pS. All outputs have less than 200pS of cycle-to-cycle jitter. The input and output propagation delay is guaranteed to be less than 250pS, and the output-to-output skew is guaranteed to be less than 250pS. Less than 200pS cycle-to-cycle jitter Available in 8pin, 150 mil SOIC, 4.4mm TSSOP Packages (ASM3P623S00B/C/J) 3.3V operation Industrial temperature range Advanced 0.35µ CMOS technology The First True Drop-in Solution Functional Description ASM3P623S01B/C/J is a versatile, 3.3V zero-delay buffer designed to distribute high-speed Timing-Safe™ clocks with Peak EMI reduction. ASM3P623S01B/C accepts one reference input and drives out three low-skew clocks. It is Refer “Spread Spectrum Control and Input-Output Skew Table” for deviations and Input-Output Skew for ASM3P623S01B/C/J devices Block Diagram VDD SSON SS% Modulation XIN/CLKIN XOUT Crystal Oscillator Reference Divider Feedback Divider Phase Detector Loop Filter VCO PLL Feedforward Divider CLKOUT GND PulseCore Semiconductor Corporation 1715 S. Bascom Ave Suite 200 Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018 www.pulsecoresemi.com Notice: The information in this document is subject to change without notice. May 2007 rev 0.4 Spread Spectrum Frequency Generation The clocks in digital systems are typically square waves with a 50% duty cycle and as frequencies increase the edge rates also get faster. Analysis shows that a square wave is composed of fundamental frequency and harmonics. The fundamental frequency and harmonics generate the energy peaks that become the source of EMI. Regulatory agencies test electronic equipment by measuring the amount of peak energy radiated from the equipment. In fact, the peak level allowed decreases as the frequency increases. The standard methods of reducing EMI are to use shielding, filtering, multi-layer ASM3P623S01B/C/J PCBs etc. These methods are expensive. Spread spectrum clocking reduces the peak energy by reducing the Q factor of the clock. This is done by slowly modulating the clock frequency. The ASM3P623S01B/C/J uses the center modulation spread spectrum technique in which the modulated output frequency varies above and below the reference frequency with a specified modulation rate. With center modulation, the average frequency is the same as the unmodulated frequency and there is no performance degradation Timing-Safe™ technology Timing-Safe™ technology is the ability to modulate a clock source with Spread Spectrum technology and maintain synchronization with any associated data path. Pin Configuration CLKIN 1 8 7 6 5 CLKOUT VDD CLKOUT2 SSON CLKOUT1 2 SS% 3 GND 4 ASM3P623S01B/C XIN/CLKIN 1 8 7 6 5 CLKOUT VDD CLKOUT1 SSON XOUT 2 SS% 3 GND 4 ASM3P623S01J Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 2 of 12 May 2007 rev 0.4 Pin Description for ASM3P623S01B/C Pin # 1 2 3 4 5 6 7 8 ASM3P623S01B/C/J Pin Name CLKIN CLKOUT SS% 3 2 Description Input reference frequency, 5V-tolerant input Buffered clock output Spread Spectrum Selection Ground Spread Spectrum enable and disable option When SSON is HIGH, the spread spectrum is enabled and when LOW, it turns off the spread spectrum. Buffered clock output 3.3V supply Buffered clock output GND SSON3 CLKOUT2 VDD CLKOUT 1,2 Notes: 1. This output is driven and has an internal feedback for the PLL. 2. Weak pull-down on all outputs. 3. Weak pull-up on these inputs 4. Buffered clock outputs are Timing-Safe™ Pin Description for ASM3P623S01J Pin # 1 2 3 4 5 6 7 8 Pin Name XIN/CLKIN XOUT SS%2 GND SSON2 CLKOUT1 VDD CLKOUT 1,3 Description Crystal connection or external reference frequency input. This pin has dual functions. It can be connected either to an external crystal or an external reference clock. Crystal connection. If using an external reference, this pin must be left unconnected. Spread Spectrum Selection Ground Spread Spectrum enable and disable option When SSON is HIGH, the spread spectrum is enabled and when LOW, it turns off the spread spectrum. Buffered clock output 3.3V supply Buffered clock output Notes: 1. Weak pull-down on all outputs. 2. Weak pull-up on these inputs 3. This output is driven and has an internal feedback for the PLL. 4. Buffered clock outputs are Timing-Safe™ Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 3 of 12 May 2007 rev 0.4 Spread Spectrum Control and Input-Output Skew Table (Note: The values given in the table are for an input frequency of 32 MHz) ASM3P623S01B/C/J Device ASM3P623S01B SS% 0 1 0 1 0 1 Deviation ±0.25 % ±0.5 % ±.125 % ±0.25 % ±0.125 % ±0.25 % Input-Output Skew(±TSKEW) 0.125 0.25 0.125 0.25 0.125 0.25 ASM3P623S01C ASM3P623S01J Note: TSKEW is measured in units of the Clock Period Absolute Maximum Rating Symbol VDD TSTG Ts TJ TDV Storage temperature Max. Soldering Temperature (10 sec) Junction Temperature Static Discharge Voltage (As per JEDEC STD22- A114-B) Parameter Voltage on any pin with respect to Ground Rating -0.5 to +4.6 -65 to +125 260 150 2 Unit V °C °C °C KV Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect device reliability. Operating Conditions for ASM3P623S01B/C/J Devices Parameter VDD TA CL CIN Supply Voltage Operating Temperature (Ambient Temperature) Load Capacitance Input Capacitance Description Min 3.0 -40 Max 3.6 +85 30 7 Unit V °C pF pF Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 4 of 12 May 2007 rev 0.4 Electrical Characteristics for ASM3P623S01B/C/J Parameter VIL VIH IIL IIH VOL VOH IDD Zo ASM3P623S01B/C/J Description Input LOW Voltage Input LOW Current Input HIGH Current Output LOW Voltage6 Output HIGH Voltage Supply Current Output Impedance 6 5 5 Test Conditions Min 2.0 Typ Max 0.8 Unit V V µA µA V V mA Ω Input HIGH Voltage VIN = 0V VIN = VDD IOL = 8mA IOH = -8mA Unloaded outputs 2.4 15 23 50 100 0.4 Switching Characteristics for ASM3P623S01B/C/J7 Parameter 1/t1 t3 t4 t5 t6 t7 tJ tLOCK Description Output Frequency Duty Cycle = (t2 / t1) * 100 Output Rise Time Output Fall Time 6 6 6 6 Test Conditions 30pF load Measured at VDD/2 Measured between 0.8V and 2.0V Measured between 2.0V and 0.8V All outputs equally loaded Measured at VDD /2 Measured at VDD/2 on the CLKOUT pins of the device Loaded outputs Stable power supply, valid clock presented on CLKIN pin Min 20 40 Typ 50 Max 50 60 2.5 2.5 250 ±350 700 200 1.0 Unit MHz % nS nS pS pS pS pS mS Output-to-output skew CLKOUT Rising Edge Delay, CLKIN Rising Edge to 6 Device-to-Device Skew 6 Cycle-to-cycle jitter 6 PLL Lock Time 6 Notes: 5. CLKIN input has a threshold voltage of VDD/2 6. Parameter is guaranteed by design and characterization. Not 100% tested in production 7. All parameters specified with loaded outputs. Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 5 of 12 May 2007 rev 0.4 Switching Waveforms ASM3P623S01B/C/J Duty Cycle Timing t2 1.4 V 1.4 V t1 1.4 V All Outputs Rise/Fall Time 2.0 V 0.8 V t3 t4 2.0 V 0.8 V 3.3 V 0V OUTPUT Output - Output Skew 1.4 V O UTPUT 1.4 V O UTPUT t5 Input - Output Propagation Delay VDD /2 INPUT OUTPUT VDD /2 t6 Device - Device Skew CLKOUT, Device 1 VDD /2 VDD /2 CLKOUT, Device 2 t7 Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 6 of 12 May 2007 rev 0.4 Input-Output Skew Timing-Safe™ Output ASM3P623S01B/C/J Test Circuit Input +3.3V TSKEW TSKEW+ 0.1uF One clock cycle N=1 when spread spectrum is ON For example, TSKEW = ± 0.125 for an Input clock 32MHz, translates in to (1/32MHz) * 0.125=3.90nS OUTPUT VDD CLKOUT CLOAD GND TSKEW represents input-output skew A Typical example of Timing-Safe™ waveform Input Input CLKOUT with SSOFF Timing-Safe™ CLKOUT Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 7 of 12 May 2007 rev 0.4 Package Information 8-lead SOIC Package(150-mil) ASM3P623S01B/C/J E H D A2 A θ e B A 1 C L D Dimensions Symbol Min A1 A A2 B C D E e H L θ Inches Max 0.010 0.069 0.059 0.020 0.010 0.004 0.053 0.049 0.012 0.007 Millimeters Min Max 0.10 1.35 1.25 0.31 0.18 4.90 BSC 3.91 BSC 1.27 BSC 6.00 BSC 0.41 0° 1.27 8° 0.25 1.75 1.50 0.51 0.25 0.193 BSC 0.154 BSC 0.050 BSC 0.236 BSC 0.016 0° 0.050 8° Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 8 of 12 May 2007 rev 0.4 8-lead TSSOP Package(4.40-MM Body) ASM3P623S01B/C/J H E D A2 A θ e B A1 L C Dimensions Symbol Min A A1 A2 B c D E e H L θ 0.020 0° 0.002 0.033 0.008 0.004 0.114 0.169 0.026 BSC 0.252 BSC 0.028 8° 0.50 0° Inches Max 0.043 0.006 0.037 0.012 0.008 0.122 0.177 0.05 0.85 0.19 0.09 2.90 4.30 Millimeters Min Max 1.10 0.15 0.95 0.30 0.20 3.10 4.50 0.65 BSC 6.40 BSC 0.70 8° Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 9 of 12 May 2007 rev 0.4 Ordering Codes Ordering Code ASM3P623S01BF-08-ST ASM3I623S01BF-08-ST ASM3P623S01BF-08-SR ASM3I623S01BF-08-SR ASM3P623S01BF-08-TT ASM3I623S01BF-08-TT ASM3P623S01BF-08-TR ASM3I623S01BF-08-TR ASM3P623S01BG-08-ST ASM3I623S01BG-08-ST ASM3P623S01BG-08-SR ASM3I623S01BG-08-SR ASM3P623S01BG-08-TT ASM3I623S01BG-08-TT ASM3P623S01BG-08-TR ASM3I623S01BG-08-TR ASM3P623S01CF-08-ST ASM3I623S01CF-08-ST ASM3P623S01CF-08-SR ASM3I623S01CF-08-SR ASM3P623S01CF-08-TT ASM3I623S01CF-08-TT ASM3P623S01CF-08-TR ASM3I623S01CF-08-TR ASM3P623S01CG-08-ST ASM3I623S01CG-08-ST ASM3P623S01CG-08-SR ASM3I623S01CG-08-SR ASM3P623S01CG-08-TT ASM3I623S01CG-08-TT ASM3P623S01CG-08-TR ASM3I623S01CG-08-TR ASM3P623S01JF-08-ST ASM3P623S01B/C/J Marking 3P623S01BF 3I623S01BF 3P623S01BF 3I623S01BF 3P623S01BF 3I623S01BF 3P623S01BF 3I623S01BF 3P623S01BG 3I623S01BG 3P623S01BG 3I623S01BG 3P623S01BG 3I623S01BG 3P623S01BG 3I623S01BG 3P623S01CF 3I623S01CF 3P623S01CF 3I623S01CF 3P623S01CF 3I623S01CF 3P623S01CF 3I623S01CF 3P623S01CG 3I623S01CG 3P623S01CG 3I623S01CG 3P623S01CG 3I623S01CG 3P623S01CG 3I623S01CG 3P623S01JF Package Type 8-pin 150-mil SOIC- TUBE, Pb Free 8-pin 150-mil SOIC- TUBE, Pb Free 8-pin 150-mil SOIC-TAPE & REEL, Pb Free 8-pin 150-mil SOIC-TAPE & REEL, Pb Free 8-pin 4.4-mm TSSOP - TUBE, Pb Free 8-pin 4.4-mm TSSOP - TUBE, Pb Free 8- pin 4.4-mm TSSOP - TAPE & REEL, Pb Free 8-pin 4.4-mm TSSOP - TAPE & REEL, Pb Free 8-pin 150-mil SOIC- TUBE, Green 8-pin 150-mil SOIC- TUBE, Green 8-pin 150-mil SOIC-TAPE & REEL, Green 8-pin 150-mil SOIC-TAPE & REEL, Green 8-pin 4.4-mm TSSOP - TUBE, Green 8-pin 4.4-mm TSSOP - TUBE, Green 8- pin 4.4-mm TSSOP - TAPE & REEL, Green 8-pin 4.4-mm TSSOP - TAPE & REEL, Green 8-pin 150-mil SOIC- TUBE, Pb Free 8-pin 150-mil SOIC- TUBE, Pb Free 8-pin 150-mil SOIC-TAPE & REEL, Pb Free 8-pin 150-mil SOIC-TAPE & REEL, Pb Free 8-pin 4.4-mm TSSOP - TUBE, Pb Free 8-pin 4.4-mm TSSOP - TUBE, Pb Free 8- pin 4.4-mm TSSOP - TAPE & REEL, Pb Free 8-pin 4.4-mm TSSOP - TAPE & REEL, Pb Free 8-pin 150-mil SOIC- TUBE, Green 8-pin 150-mil SOIC- TUBE, Green 8-pin 150-mil SOIC-TAPE & REEL, Green 8-pin 150-mil SOIC-TAPE & REEL, Green 8-pin 4.4-mm TSSOP - TUBE, Green 8-pin 4.4-mm TSSOP - TUBE, Green 8- pin 4.4-mm TSSOP - TAPE & REEL, Green 8-pin 4.4-mm TSSOP - TAPE & REEL, Green 8-pin 150-mil SOIC- TUBE, Pb Free Temperature Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 10 of 12 May 2007 rev 0.4 Ordering Codes (Cont’d) Ordering Code ASM3I623S01JF-08-ST ASM3P623S01JF-08-SR ASM3I623S01JF-08-SR ASM3P623S01JF-08-TT ASM3I623S01JF-08-TT ASM3P623S01JF-08-TR ASM3I623S01JF-08-TR ASM3P623S01JG-08-ST ASM3I623S01JG-08-ST ASM3P623S01JG-08-SR ASM3I623S01JG-08-SR ASM3P623S01JG-08-TT ASM3I623S01JG-08-TT ASM3P623S01JG-08-TR ASM3I623S01JG-08-TR ASM3P623S01B/C/J Marking 3I623S01JF 3P623S01JF 3I623S01JF 3P623S01JF 3I623S01JF 3P623S01JF 3I623S01JF 3P623S01JG 3I623S01JG 3P623S01JG 3I623S01JG 3P623S01JG 3I623S01JG 3P623S01JG 3I623S01JG Package Type 8-pin 150-mil SOIC- TUBE, Pb Free 8-pin 150-mil SOIC-TAPE & REEL, Pb Free 8-pin 150-mil SOIC-TAPE & REEL, Pb Free 8-pin 4.4-mm TSSOP - TUBE, Pb Free 8-pin 4.4-mm TSSOP - TUBE, Pb Free 8- pin 4.4-mm TSSOP - TAPE & REEL, Pb Free 8-pin 4.4-mm TSSOP - TAPE & REEL, Pb Free 8-pin 150-mil SOIC- TUBE, Green 8-pin 150-mil SOIC- TUBE, Green 8-pin 150-mil SOIC-TAPE & REEL, Green 8-pin 150-mil SOIC-TAPE & REEL, Green 8-pin 4.4-mm TSSOP - TUBE, Green 8-pin 4.4-mm TSSOP - TUBE, Green 8- pin 4.4-mm TSSOP - TAPE & REEL, Green 8-pin 4.4-mm TSSOP - TAPE & REEL, Green Temperature Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Commercial Industrial Device Ordering Information ASM3P623S01BF-08-TR R = Tape & Reel, T = Tube or Tray O = SOT S = SOIC T = TSSOP A = SSOP V = TVSOP B = BGA Q = QFN DEVICE PIN COUNT F = LEAD FREE AND RoHS COMPLIANT PART G = GREEN PACKAGE, LEAD FREE, and RoHS PART NUMBER X= Automotive I= Industrial P or n/c = Commercial (-40C to +125C) (-40C to +85C) (0C to +70C) 1 = Reserved 2 = Non PLL based 3 = EMI Reduction 4 = DDR support products 5 = STD Zero Delay Buffer 6 = Power Management 7 = Power Management 8 = Power Management 9 = Hi Performance 0 = Reserved U = MSOP E = TQFP L = LQFP U = MSOP P = PDIP D = QSOP X = SC-70 PulseCore Semiconductor Mixed Signal Product Licensed under US patent #5,488,627, #6,646,463 and #5,631,920. Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 11 of 12 May 2007 rev 0.4 ASM3P623S01B/C/J PulseCore Semiconductor Corporation 1715 S. Bascom Ave Suite 200 Campbell, CA 95008 Tel: 408-879-9077 Fax: 408-879-9018 www.pulsecoresemi.com Copyright © PulseCore Semiconductor All Rights Reserved Part Number: ASM3P623S00B/C/J Document Version: 0.4 Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to PulseCore Semiconductor, dated 11-11-2003 Timing-Safe™ US Patent Pending. © Copyright 2006 PulseCore Semiconductor Corporation. All rights reserved. Our logo and name are trademarks or registered trademarks of PulseCore Semiconductor. All other brand and product names may be the trademarks of their respective companies. PulseCore reserves the right to make changes to this document and its products at any time without notice. PulseCore assumes no responsibility for any errors that may appear in this document. The data contained herein represents PulseCore’s best data and/or estimates at the time of issuance. PulseCore reserves the right to change or correct this data at any time, without notice. If the product described herein is under development, significant changes to these specifications are possible. The information in this product data sheet is intended to be general descriptive information for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or customer. PulseCore does not assume any responsibility or liability arising out of the application or use of any product described herein, and disclaims any express or implied warranties related to the sale and/or use of PulseCore products including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual property rights, except as express agreed to in PulseCore’s Terms and Conditions of Sale (which are available from PulseCore). All sales of PulseCore products are made exclusively according to PulseCore’s Terms and Conditions of Sale. The purchase of products from PulseCore does not convey a license under any patent rights, copyrights; mask works rights, trademarks, or any other intellectual property rights of PulseCore or third parties. PulseCore does not authorize its products for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to result in significant injury to the user, and the inclusion of PulseCore products in such life-supporting systems implies that the manufacturer assumes all risk of such use and agrees to indemnify PulseCore against all claims arising from such use. Timing-Safe™ Peak EMI Reduction IC Notice: The information in this document is subject to change without notice. 12 of 12