H0126NL

LAN Product Guide _ PC Applications Available for 10/100Base-T and 1000Base-T data rates Available options: PoE, AutoMDIX, extended temperature, low profile SMT (surface mount) discrete and THT (through hole) connector modules with integrated magnetics X = extended temp, P = PoE, NL = RoHS compliant, A = AutoMDIX, Meets IEEE 802.3 specification DESKTOP LAPTOP / NOTEBOOK Gigabit 10/100 Gigabit DISCRETE MAGNETICS Single H5007NL A H5009NL A H6062NL P, A Dual H5012NL A H5014NL A H6080NL P, A Single H1102NL A H2019NL P, A DISCRETE MAGNETICS Dual H1270NL A H2006ANL P, A H2009NL P, A Standard H5007NL A H5009NL A H6062NL P, A CONNECTORS WITH INTEGRATED MAGNETICS 1x1 JK0-0036NL A JK0654219NL A 1x2 JG0-0129NL A JG0-0134NL A USB/RJ45 COMBO 10/100 JW0-0009NL www.pulseeng.com Gigabit JW0-0006NL A 1x1 J00-0045NL A J00-0065NL A J1011F21PNL A JK0-0025NL P, A 10/100 Reduced Profile H5015NL A H5077NL A H5079NL A Standard H1102NL A H2019NL P, A Low Profile H0020NL H0068ANL A H0126NL CONNECTORS WITH INTEGRATED MAGNETICS 1x2 J80-0019 A J80-0034 A J8064D628ANL A 1x1 Standard JK0-0036NL A JK0654219NL A 1 1x1 Low Profile J0G-0002NL A J0G-0009NL A 1x1 Standard J00-0045NL A J00-0065NL A J1011F21PNL A JK0-0025NL P, A 1x1 Low Profile J0G-0007NL A HJ600.C (1/07) LAN Product Guide _ PC Applications APPLICATION NOTES Using BST (75 Ω resistors and high voltage cap to chassis ground) to terminate Cable side CTs is advisable for best EMI performance (included in most connector solutions). Follow PHY manufacturer’s application notes for further layout considerations. Layering ground planes is advisable. Route connector/discrete module ground pins to chassis/analog ground if possible. Keep signal traces from PHY to connector/discrete module as short as possible. If traces exceed 3-4 inches, pay close attention to line impedance imbalance. 10/100 APPLICATION CIRCUIT GIGABIT APPLICATION CIRCUIT 10/100/1000 IC PHY Inside the Discrete Module VCC VCC 100 nF Inside the Discrete Module 10 nF 8 MX3 + MD3 + 50 W 50 W MD3 MD2 + 5 MX2 + 50 W 50 W MD2 MD1 + 10 nF 4 MX2 - 1:1 6 MX1 + 50 W 50 W MD1 MD0 + 7 MX3 - 1:1 10 nF 10 nF 3 MX1 - 1:1 2 MX0 + 50 W 50 W 10 nF 1:1 MD0 - 2X0.1 µF 1 MX0 4X75 W 1000 pF 2 KV 10 nF SHIELD Inside the Connector Inside the Connector For More Information: Pulse Worldwide Headquarters Pulse Europe 12220 World Trade Dr. San Diego, CA 92128 U.S.A. Einsteinstrasse 1 D-71083 Herrenberg Germany www.pulseeng.com Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 7032 7806 116 Fax: 49 7032 7806 135 Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Tech-Innovation International Tenth Kejinan Rd. High-Tech Industrial Park Nanshan District, Shenzhen China Tel: 86 755 33966678 Fax: 86 755 33966700 Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. Tel: 86 21 54643211/2 Fax: 86 21 54643210 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4641811 Fax: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2007. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com 2 HJ600.C (1/07)