J0026D01NL

PulseJack™ 1x1 Tab-DOWN RJ45 Description: 100 Base-TX (Fast Ethernet) RJ45 1x1 Tab-DOWN with LEDs 8-pin (J0 series) intergrated magnetics connector (ICM), designed to support applications, such as SOHO (ADSL modems), LAN-on-Motherboard (LOM), Hub and Switches. Features and Benefits: RoHS peak wave solder temperature rating 260°C Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Electrical Performance Summary: Meets or exceeds IEEE 802.3 standard for 100Base-TX 350 µH minimum OCL with 8mA bias current Minimum 1500Vrms isolation per IEEE 802.3 requirement J0006D21BNL shown Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C Turns Ratios RoHS Compliant Part Number TX RX J0006D01BNL J0006D21NL J0006D21BNL J0011D01NL J0011D01BNL J0011D21NL J0011D21BNL J0011D21ENL J0012D21NL J0018D21NL J0018D21ENL J0026D01NL J0026D01BNL J0026D01ENL J0026D21NL J0026D21BNL J0026D21ENL J0026D21FNL J0026D21GNL J00-0014NL J00-0045NL J00-0061NL J00-0065NL Mech. EMI Drawing Fingers LEDs1 (L/R) Insertion Loss (dB TYP) 1-65 MHz 1CT:1 1CT:1 A No G/Y -1 1CT:1 1CT:1 D YES N/A -1 1CT:1 1CT:1 B YES G/Y -1 1CT:1 1CT:1 C No N/A -1 1CT:1 1CT:1 A No G/Y -1 1CT:1 1CT:1 D YES N/A -1 1CT:1 1CT:1 B YES G/Y -1 1CT:1 1CT:1 B YES G/G -1 1CT:1 1CT:1 D YES N/A -1 1CT:1.414 1CT:1 D YES N/A -1 1CT:1.414 1CT:1 B YES G/G -1 1CT:1 1CT:1 C No N/A -1 1CT:1 1CT:1 A No G/Y -1 1CT:1 1CT:1 A No G/G -1 1CT:1 1CT:1 D YES N/A -1 1CT:1 1CT:1 B YES G/Y -1 1CT:1 1CT:1 B YES G/G -1 1CT:1 1CT:1 B YES G/Y -1 1CT:1 1CT:1 B YES YG/G -1 1CT:1 1CT:1 C No N/A -1 1CT:1 1CT:1 A No G/Y -1 1CT:1 1CT:1 F YES N/A -1 1CT:1 1CT:1 E YES G/Y -1 2 3 Return Loss (dB TYP) 100W ±15W 1-10 MHz -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 10-30 MHz -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 -16 30-60 MHz -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 Common Mode Rejection Crosstalk (dB TYP) 60-80 MHz 1-30 MHz -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -10 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 30-60 MHz -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 (dB TYP) 60-100 MHz -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 1-50 MHz -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 Hipot (VDC) 50-150 1 MIN MHz -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 -20 2250 Notes: 1. LEDs Left/right: G=green, Y=yellow, N/A=none, YG=Bi-color LED Yellow Green. 2. LEDs with internal resistor. 3. Bi-color Left LED. RJ45 Durability Testing Rating Mating Force Part Number J0 Series (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs. RJ45 Material Specification Part Number J0 Series Shield Material Finish 10-20m inches Nickel over Brass 10-20m inches Brass Material Phosphor Bronze Notes: 1. Connector dimensions comply with FCC dimension requirements. 2. RoHS parts are tin matte finish over nickel. 1 Contact Plating Area Nickel underplating and selective gold plating 15µ inches Housing Solder Area 120µ inches SN100 over 50µ inches nickel 2 Material Specification MSL 3 Rating Thermoplastic UL 94 V-0 1 3. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest = 1, lowest = 5) Networking.PulseElectronics.com J403.K (03/19) PulseJack™ 1x1 Tab-DOWN RJ45 J0 Series Mechanicals A B Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 2 Networking.PulseElectronics.com J403.K (03/19) PulseJack™ 1x1 Tab-DOWN RJ45 J0 Series Mechanicals (continued) C Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 D 3 Networking.PulseElectronics.com J403.K (03/19) PulseJack™ 1x1 Tab-DOWN RJ45 J0 Series Mechanicals (continued) E FRONT VIEW SIDE VIEW View from PCB component side Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 F 4 Networking.PulseElectronics.com J403.K (03/19) PulseJack™ 1x1 Tab-DOWN RJ45 J0011schem.eps subm. by Manijeh F Nov 7 2000 subm. by Manijeh F Nov 7 200 J0011schem.eps edits submitted 1/19/01 by Manijeh F. submitted 1/19/01 by Manijeh F. edits J0 Series Electrical Schematics again, edits submitted 2/19/01 by Manijeh F. submitted 2/19/01 by Manijeh F. again, edits J0011/J00-0014NL/45NL/61NL/65NL J0012 TD+ 1 TD+ 1 1 TX+ CT 4 1 TX+ CT 2 75 75 TD- 3 RD+ 3 3 RX+ CT 5 75 RD- 6 6 RX- 1CT : 1 RECEIVE PCB SIDE TO PHY 2 TX- 1CT : 1 TRANSMIT CABLE SIDE PCB SIDE TO PHY TD- 2 RD+ 4 75 3 RX+ CT 5 75 RD- 6 4 NC 7 2 TX- 1CT : 1 TRANSMIT 6 RX- 1CT : 1 RECEIVE 4 NC 7 5 5 75 7 CHS GROUND 8 0.001F NOTE: Connect CHS GND to PCB ground. J0011schem.eps subm. by Manijeh F Nov 7 2000 edits submitted 1/19/01 by Manijeh F. again, edits submitted 2/19/01 by Manijeh F. J0018 CABLE SIDE J0006 7 0.001F 8 GRND 8 8      
   
  CHS 75 NOTE: Connect CHS GND to PCB ground. 75 J0026 TD+ 1 TD+ 1 1 TX+ CT 3 75 CT 5 75 6 RX- 1CT : 1 RECEIVE PCB SIDE TO PHY 3 RX+ CABLE SIDE PCB SIDE TO PHY RD+ 3 RD- 6 TD- 2 2 TX- 1CT : 2 TRANSMIT RD+ 7 3 RX+ CT 6 RD- 8 1CT : 1 RECEIVE 75 5 NOTE: Connect CHS GND to PCB ground. 75 8 75 4 7 0.001F 6 RX4 4 NC 7 CHS GROUND 8 2 TX- 1CT : 1 TRANSMIT CABLE SIDE CT 4 TD- 2 1 TX+ 75 75 7 0.001F CHS GROUND 5 C1 5 75 8 NOTE: Connect CHS GND to PCB ground. 5 Networking.PulseElectronics.com J403.K (03/19) PulseJack™ 1x1 Tab-DOWN RJ45 LED Configuration Standard LED Yellow Green Wavelength 585 nm 565 nm Forward* V(MAX) 2.5 V 2.5 V (TYP) 2.1 V 2.2 * Using an internal resistor within the LED increases the voltage rating of the diode from 2.5 V to 5.0 V (assumes bias current = 20 mA). For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 6 Networking.PulseElectronics.com J403.K (03/19)