J0G-0001NL

PulseJack™ Low Profile 1x1 Tab-Up Description: 100/1000Base-T RJ45 single port (1x1) Tab-UP integrated magnetics connector, designed to support applications such as Network Interface Cards (NIC), LAN-on-Motherboard (LOM), and PC applications. Features and Benefits: Compliant with IEEE 802.3 standard 350µH minimum OCL with 8mA bias current High performance for maximum EMI suppression Low height and small footprint to minimize board space RoHS peak wave solder temperature rating 260°C Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C Part Number Speed Side EMI Tabs Insertion Loss TX/RX (dB) Return Loss (dB TYP) 100Ω (±15Ω) Crosstalk (dB TYP) Common Mode Rejection (dB TYP) Hipot (MIN) 1-100 MHz 1-10 MHz 30 MHz 60-80 MHz 80-100 MHz 1-10 MHz 32-65 MHz 65-100 MHz 1-125 MHz @ 60Hz 1 MIN J0G-0001NL 1000Base-T Horizontal -1.2 -18 -18 -12 -10 -40 -35 -30 -30 1500Vrms J0G-0003NL 1000Base-T No Tabs -1.0 -18 -18 -12 -10 -40 -35 -30 -30 1500Vrms J0G-0007NL 100Base-TX Horizontal -1.0 -18 -18 -12 -10 -40 -35 -30 -30 1500Vrms J0G-0009NL 1000Base-T Vertical -1.0 -18 -18 -12 -10 -40 -35 -30 -30 1500Vrms Notes: 1. LEDs Left/Right: G = green; Y = yellow; Y-G = Bicolor. 2. J0G-0003NL is supplied without EMI tabs; refer to mechanical drawing (page 5) for explanation of EMI tabs. RJ45 Durability Test Rating Mating Force (MAX) Unmating Force (MAX) Durability Part Number Plug to Jack Retention (MIN) J0G Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 20 Ibs./9.072 kgs. RJ45 Material Specification Shield Housing Contact Part Number Material Finish Material Plating Area Solder Area Material Brass 20-40µ inches thick nickel over brass Phosphor Bronze 15µ inches gold over 30-80µ inches nickel Tin matte finish over nickel Thermoplastic J0G Series 2 MSL Specification Rating UL 94 V-0 1 Notes: 1. Connector dimensions comply with FCC dimension requirements. 2. MSL - Moisture Sensitivity Level class limits = 1 to 5 (Highest: 1; Lowest: 5) 1 Networking.PulseElectronics.com J423.D (03/19) PulseJack™ Low Profile 1x1 Tab-Up Schematics J0G-0001NL / J0G-0003NL J0G-0007NL J0G-0009NL 2 Networking.PulseElectronics.com J423.D (03/19) PulseJack™ Low Profile 1x1 Tab-Up LED Configuration Pin Assignments J0G-0001NL J0G-0009NL PulseJack J0G-0003NL J0G-0007NL PulseJack PulseJack 3 Networking.PulseElectronics.com J423.D (03/19) PulseJack™ Low Profile 1x1 Tab-Up Mechanicals J0G-0001NL / 0003NL / 0007NL / 0009NL Measurements (in./mm) Dim”A” (Signal Pins) Dim”B” (LED Pins) Dim”C” (Post) Dim”D” (Shield Tab) EMI Tab Config. J0G-0001NL J0G-0009NL .125/3,18 .070/1,78 .125/3,18 .070/1,78 .130/3,30 .070/1,78 .140/3,56 .070/1,78 Fig.1 Fig.2 J0G-0003NL J0G-0007NL .125/3,18 .070/1,78 .125/3,18 .070/1,78 .130/3,30 .070/1,78 .140/3,56 .070/1,78 Fig.3 Fig.1 Part No. 4 Networking.PulseElectronics.com J423.D (03/19) PulseJack™ 2xN PoE Gigstack EMI Tabs Configuration For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 5 Networking.PulseElectronics.com J423.D (03/19)