J1N-0004NL

PulseJack™ 1X4 Tab-Up PoE and PoE+ Description: 100/1000 Base-T 1x4 Tab-Up Low Profile Integrated Connector Modue (ICM), with or without LEDs - Designed to support Router appliactions. Features and Benefits: RoHS peak wave solder temperature rating 260�C Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Meets IEEE 802.3 specification 350μH minimum OCL with 8mA bias current High performance for maximum EMI suppression Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C Return Loss (dB TYP) 100Ω (±15Ω) Common Mode Rejection (dB TYP) Hipot (Vrms MIN) PoE/PoE+ LEDs L/R Insertion Loss TX/RX (dB TYP) 1-100 MHz J1N-0003NL 1000Base-T PoE+ G/G -1.0 -20 -18 -14 -45 -40 -35 -35 1500 J1N-0004NL 1000Base-T PoE+ None -1.0 -20 -18 -14 -45 -40 -35 -35 1500 J1N-0005NL 1000Base-T None G-0/G -1.0 -20 -18 -14 -45 -40 -35 -35 1500 J1N-0006NL 1000Base-T None None -1.0 -20 -18 -14 -45 -40 -35 -35 1500 J1N-0007NL 1000Base-T PoE None -1.0 -20 -18 -14 -45 -40 -35 -35 1500 J1N-0008NL 1000Base-T PoE G/G -1.0 -20 -18 -14 -45 -40 -35 -35 1500 J1N-0011NL 100Base-TX PoE None -1.0 -20 -18 -14 -45 -40 -35 -35 1500 J1N-0012NL 100Base-TX None None -1.0 -20 -18 -14 -45 -40 -35 -35 1500 J1N-0013NL 100Base-TX None G/Y -1.0 -20 -18 -14 -45 -40 -35 -35 1500 RoHS Compliant Part Number Speed Crosstalk (dB TYP) 1-10 MHz 30 MHz 60-80 MHz 1-10 MHz 30-60 MHz 60-100 MHz 1-125 MHz @ 60Hz 1 MIN Notes: 1. LEDs Left/Right: G = Green, O = Orange Y = Yellow RJ45 Durability Testing Rating Part Number Mating Force (MAX) Ultimate Force (MAX) Durability Plug to Jack Retention (MIN) J1N Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 20 Ibs./9.072 kgs. RJ45 Material Specification Shield Contact Housing Part Number Material Finish Material Plating Area Solder Area Material Specification MSL J1N Series Brass 20-40μ inches thick Nickel over Brass Phosphor Bronze 30μ inches gold over 30-80μ inches nickel Tin matte finish Thermoplastic UL 94 V-0 1 2 Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements. 2. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest rating = 1, lowest rating = 5). 1 Networking.PulseElectronics.com J435.B (03/19) PulseJack™ 1X4 Tab-Up PoE and PoE+ Mechanicals J1N-0003NL, J1N-0008NL PulseJack ™ J1N-XXXXNL DATE CODE CTRY OF MFG 2 Networking.PulseElectronics.com J435.B (03/19) PulseJack™ 1X4 Tab-Up PoE and PoE+ Mechanicals (continued) J1N-0004NL, J1N-0007NL PulseJack ™ J1N-XXXXNL DATE CODE CTRY OF MFG 3 Networking.PulseElectronics.com J435.B (03/19) PulseJack™ 1X4 Tab-Up PoE and PoE+ Mechanicals (continued) J1N-0005NL, J1N-0006NL PulseJack ™ J1N-XXXXNL DATE CODE CTRY OF MFG Note: No LED’s pinout for J1N-0006NL 4 Networking.PulseElectronics.com J435.B (03/19) PulseJack™ 1X4 Tab-Up PoE and PoE+ Mechanicals (continued) J1N-0011NL, J1N-0012NL, J1N-0013NL PulseJack ™ J1N-XXXXNL DATE CODE CTRY OF MFG Note: No PoE pinout for J1N-0012NL 5 Networking.PulseElectronics.com SUGGESTED FOOTPRINT (J1N-0013NL SIDE SHOW) J435.B (03/19) PulseJack™ 1X4 Tab-Up PoE and PoE+ Schematics J1N-0003NL, J1N-0004NL, J1N-0007NL, J1N-0008NL LED SPECIFICATIONS FOR J1N-0003NL AND J1N-0008NL 6 Networking.PulseElectronics.com J1N-0005NL, J1N-0006NL, LED SPECIFICATIONS FOR J1N-0005NL J435.B (03/19) PulseJack™ 1X4 Tab-Up PoE and PoE+ Schematics J1N-0011NL, J1N-0012NL (continued) J1N-0013NL LED SPECIFICATIONS FOR J1N-0013NL For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 7 Networking.PulseElectronics.com J435.B (03/19)