J20-0013

PulseJack® 2xN RJ45 Connector Description: 100 Base-TX (Fast Ethernet) RJ45 2xN Integrated Connector Module (ICM) with or without LEDs Designed to support Switch and Gateway applications. Features and Benefits: RoHS peak wave solder temperature rating 260°C Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Internal magnetics are 100% electrically tested for HI-POT and functionality Internal magnetics options available 350µH minimum OCL with 8mA bias current High performance for maximum EMI suppression Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C RoHS Compliant Part Number (Number of Ports) No. of Ports LEDs Insertion Loss (dB TYP) Return Loss (dB TYP) 100Ω (±15Ω) Common Mode Rejection (dB TYP) Crosstalk (dB TYP) L/R 1-65 MHz 1-10 MHz 10-30 MHz 30-60 MHz 60-80 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1-50 MHz 50-150 MHz J20-0013NL 4 G/Y, G/Y -1 -20 -16 -12 -12 -40 -35 -30 -30 -20 J20-0114NL 8 G/Y, G/Y -1 -20 -16 -12 -12 -40 -35 -30 -30 -20 J20-0115NL 12 G/Y, G/Y -1 -20 -16 -12 -12 -40 -35 -30 -30 -20 J20-0116NL 16 G/Y, G/Y -1 -20 -16 -12 -12 -40 -35 -30 -30 -20 JX20-0114NL* 8 G/Y, G/Y -1 -20 -16 -12 -12 -40 -35 -30 -30 -20 JX20-0115NL* 12 G/Y, G/Y -1 -20 -16 -12 -12 -40 -35 -30 -30 -20 JX20-0116NL* 16 G/Y, G/Y -1 -20 -16 -12 -12 -40 -35 -30 -30 -20 Notes: 1. (*) Operating Temperature: -40�C to +85�C 2. Bi-color LEDs: G = green; Y = yellow for each port RJ45 Durability Test Rating Mating Force (MAX) Unmating Force (MAX) Durability Part Number J2 and JX2 Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 1 Networking.PulseElectronics.com J401.H (03/19) PulseJack® 2xN RJ45 Connector RJ45 Material Specification Shield Part Number J2 and JX2 Series Material Finish Brass 10-20µ inches Nickel over 10-20µ inches Brass Housing Contact Material Plating Area Phosphor Bronze Nickel underplating and selective gold plating 30µ inches 2 Solder Area Material Specification Tin matte finish Thermoplastic UL 94 V-0 Notes: 1. All connector part numbers starting with the series prefix J2 and JX2 comply to the above limits. 2. Connector dimensions comply with FCC dimension requirement. J2 Series Mechanicals J20-0114NL, JX20-0114NL (2X4) Pulse Jack J20-0013NL TM DATE CODE CTRY OF MFG UPPER PORT LED LOWER PORT LED PIN 1 LOWER LED PIN NUMBERS 12 33 2 1 12 33 2 1 PIN 1 UPPER GREEN(LED PIN 1) COMMON(LED PIN 2) YELLOW(LED PIN 3) GREEN(LED PIN 1) COMMON(LED PIN 2) YELLOW(LED PIN 3) Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 2 Networking.PulseElectronics.com J401.H (03/19) PulseJack® 2xN RJ45 Connector J2 Series Mechanicals J20-0114NL, JX20-0114NL (2X4) 1.030 ±.005 [26.20 ±0.13] JXX-XXXXNL .085 ±.005 [2.16 ±0.13] RECOMMENDED PANEL CUT OUT .025 [0.63] 8 SURFACES 2.385 ±.005 [60.58 ±0.13] .015 ±.005 [0.38 ±0.13] TO TOP OF PCB (2.47) [(63)] 1.235 MAX [31.40 MAX] 2.340 MAX [59.44 MAX] 3X .550 (=1.650) [3X 13.97 (=41.91)] (.171) [(4.35)] .005 MIN [.13 MIN] (.550) [(13.97)] (1.11) [(28. 3 )] 1.005 MAX [25.52 MAX] .160 [4.06] .430 [10.92] .125 [3.17] .120 [3.05] 3X .550 (=1.650) 3X 13.97 (=41.91)] .550 [13.97] .480 [12.19] .380 [9.65] .280 [7.11] .200 [5.08] (.550) [(13.97)] .400 [10.16] .100 [2.54] .100 [2.54] .065 [1.65] 24X Ø.045 ±.003 [Ø1.143 ±0.0762] .050 [1.27] 64X Ø.036 ±.003 [Ø0.9144 ±0.0762] 4X Ø.062 [Ø1.57] NO TRACE ZONE .450 [11.43] .727 [18.47] .610 [15.49] 2X .110 [2.79] +.003 -.002 +0.08 Ø3.25 -0.05 .100 [2.54] 2X Ø.128 .250 [6.35] .160 [4.06] .180 [4.57] .430 [10.92] 2.100 [53.34] .100 [2.54] SUGGESTED PC BOARD LAYOUT VIEWED FROM COMPONENT SIDE UNLESS OTHERWISE SPECIFIED DIMENSIONAL TOLERANCE IS ±.002 3 Networking.PulseElectronics.com J401.H (03/19) PulseJack® 2xN RJ45 Connector J2 Series Mechanicals J20-0115NL, JX20-0115NL (2X6) 1.030 ±.005 [26.20 ±0.13] Pulse Jack JXX-XXXXNL .085 ±.005 [2.16 ±0.13] RECOMMENDED PANEL CUT OUT TM DATE CODE CTRY OF MFG 3.485 ±.005 [88.52 ±0.13] .025 [0.63] 12 SURFACES (3.57) [(91)] .015 ±.005 [0.38 ±0.13] TO TOP OF PCB 1.235 MAX [31.40 MAX] 3.440 MAX [87.38 MAX] (.171) [(4.35)] 5X .550 (=2.750) [5X 13.97 (=69.85)] .005 MIN [.13 MIN] (.550) [(13.97)] (1.11) [(28.3)] 1.005 MAX [25.52 MAX] .160 [4.06] .430 [10.92] .120 [3.05] .125 [3.17] 5X .550 (=2.750) [5X 13.97 (=69.85)] .550 [13.97] .480 [12.19] .380 [9.65] (.550) [(13.97)] .400 [10.16] .280 [7.11] 36X Ø.045 ±.003 [Ø1.143 ±0.0762] .100 [2.54] .050 [1.27] .200 [5.08] .100 [2.54] 96X Ø.036 ±.003 [Ø0.9144 ±0.0762] 4X Ø.062 [Ø1.57] .065 [1.65] NO TRACE ZONE +.003 -.002 +0.08 Ø3.25 -0.05 2X .110 [2.79] 2X Ø.128 3.200 [81.28] .430 [10.92] .100 [2.54] .160 [4.06] .180 [4.57] .250 [6.35] .610 [15.49] .100 [2.54] .727 [18.47] 4 SUGGESTED PC BOARD LAYOUT VIEWED FROM COMPONENT SIDE UNLESS OTHERWISE SPECIFIED DIMENSIONAL TOLERANCE IS ±.002 Networking.PulseElectronics.com .450 [11.43] J401.H (03/19) PulseJack® 2xN RJ45 Connector J2 Series Mechanicals J20-0116NL, JX20-0116NL (2X8) 1.030 ±.005 [26.20 ?.13] 4.585 ±005 [116.46 ±.13] Pulse Jack JXX-XXXXNL .085 ±005 [2.16 ±.13] RECOMMENDED PANEL CUT OUT TM DATE CODE CTRY OF MFG .015 ±005 [0.38 ±.13] .025 [0.63] 16 SURFACES (4.67) [(119)] TO TOP OF PCB 1.235 MAX [31.40 MAX] 4.540 MAX [115.32 MAX] (.171) [(4.35)] 7X .550 (=3.850) [7X 13.97 (=97.79)] .005 MIN [.13 MIN] (.550) [(13.97)] (1.11) [(28. 3 )] 1.005 MAX [25.52 MAX] .160 [4.06] .430 [10.92] .120 [3.05] .125 [3.17] 7X .550 (=3.850) [7X 13.97 (=97.790)] .550 [13.97] .480 [12.19] .380 [9.65] (.550) [(13.97)] .400 [10.16] .280 [7.11] 48X Ø.045 ±003 [Ø1.143 ±.0762] .100 [2.54] .050 [1.27] .200 [5.08] .100 [2.54] 128X Ø.036 ±003 [Ø0.9144 ±.0762] 4X Ø.062 [Ø1.57] .065 [1.65] NO TRACE ZONE +.003 -.002 +0.08 Ø3.25 -0.05 2X .110 [2.79] 2X Ø.128 4.300 [109.22] .430 [10.92] .100 [2.54] .160 [4.06] .180 [4.57] .610 [15.49] .727 [18.47] SUGGESTED PC BOARD LAYOUT VIEWED FROM COMPONENT SIDE UNLESS OTHERWISE SPECIFIED DIMENSIONAL TOLERANCE IS ±.002 .250 [6.35] .100 [2.54] .450 [11.43] 5 Networking.PulseElectronics.com J401.H (03/19) PulseJack® 2xN RJ45 Connector J2 Series (With LEDs) Mechanicals (not PoE Enabled) 2X6 2X6 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 6 Networking.PulseElectronics.com J401.H (03/19) PulseJack® 2xN RJ45 Connector J2 Series (With LEDs) Mechanicals (not PoE Enabled) 2X8 2X8 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 7 Networking.PulseElectronics.com J401.H (03/19) PulseJack® 2xN RJ45 Connector J2 Series Electrical Schematics J20-XXXXNL and JX20-XXXXNL 3 TX+ TD+ 3 CABLE CT 7 TD- 6 LED Configuration 6 TX1CT:1 TRANSMIT 1 1 RX+ RD+ 1 CT 4 RD- 2 2 RX1CT:1 RECEIVE 75 75 4 75 5 7 C1 CHS GND 8 2 CABLE SIDE PCB SIDE CABLE 75 8 SCHEMATIC 3 GREEN COMMON YELLOW LED ELECTRICAL SPECIFICATIONS EMMITTED COLOR GREEN YELLOW WAVE LENGTH (lf = 20 mA) 570 nm 590 nm BRIGHTNESS - MIN TO MAX (mcd) If - (mA) 5 TO 12 20 3.5 TO 8.5 20 VIEWING ANGLE 120° 120° POWER DISSIPATION (Pd) 85 mW MAXIMUM 85 mW MAXIMUM FORWARD CURRENT (0.1 mS PULSE) 160 mA MAXIMUM 160 mA MAXIMUM FORWARD VOLTAGE (Vf) (If = 20 mA) 2.8 V MAXIMUM 2.8 V MAXIMUM NOTE: PER VENDOR'S SPECIFICATION For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 8 Networking.PulseElectronics.com J401.H (03/19)