JK0654219NL

PULSEJACK TM Gigjack T12 www.pulseeng.com Description: 10/100/1000 Base-T RJ45 single port (1x1) Tab-UP with or without LEDs integrated magnetics connector (ICM), designed to support applications, such as Network Interface Cards (NIC), LAN-on-Motherboard (LOM), and PC applications. Features and Benefits: RoHS-5 peak wave solder temperature rating 235°C RoHS-6 peak wave solder temperature rating 260°C Suitable for CAT 5 and 6 Fast Ethernet cable or better UTP Electrical Performance Summary: Meets IEEE 802.3 specification 350µH minimum OCL with 8mA bias current High performance for maximum EMI suppression Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C RoHS-5 Part No. RoHS-6 Part No. LEDs1 L/R Insertion Loss TX/RX (dB) Return Loss (dB TYP) 100 Ω (± 15 Ω) Common Mode Rejection (dB TYP) Crosstalk (dB TYP) Hipot (MIN) 1-100 MHz 1-10 MHz 30 MHz 60-80 MHz 80-100 MHz 1-10 MHz 32-65 MHz 65-100 MHz 1-125 MHz 125-500 MHz @60 Hz 1 MIN JK0-0004 JK0-0004NL G/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 Vrms JK0-0014 JK0-0014NL G/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 Vrms JK0-0016 JK0-0016NL Y-G/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 Vrms JK0-0017 JK0-0017NL NONE -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 Vrms JK0-00182 JK0-0018NL2 NONE -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 Vrms JK0-0036 JK0-0036NL Y-G/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 Vrms JK0654219 JK0654219NL G/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 Vrms Notes: 1. LEDs Left/Right: G = green; Y = yellow; Y-G = Bicolor. 2. JK0-0018 and JK0-0018NL is supplied without EMI tabs; refer to Mechanical drawing for explanation of EMI tabs. 3. RoHS-5 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Product contains lead in applications considered as solders. 4. RoHS-6 - Product does not contain 5 out of the 6 banned substances specified in the RoHS directive. Some internal connections may contain lead in high temperature solder (solder alloys containing more than 85% lead). RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) JK Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs. RJ45 Material Specification Shield Part Number Material JK Series Brass Finish 20-40µ inches thick nickel over brass Contact Housing Material Plating Area Phosphor Bronze 15µ inches gold over 30-80µ inches nickel Notes: 1. Connector dimensions comply with FCC dimension requirements. 2. MSL - Moisture Sensitivity Level class limits = 1 to 5 (Highest: 1; Lowest: 5). 3 Solder Area Material 75-300µ inches tin-lead over 75-300µ inches nickel Thermoplastic Specification MSL2 Rating UL 94 V-0 1 3. NL parts are tin matte finish over nickel. USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 1 J411.G (4/07) PULSEJACK TM Gigjack T12 www.pulseeng.com Mechanical JK0-0004 / JK0-001X / JK0-0036 / JK0654219 RIGHT LED LEFT LED EMI Fingers NOTE: JK0-0017 and JK0-0018 are supplied without LEDs. Schematic JK0-001X NOTE: JK0-0017 and JK0-0018 are supplied without LEDs. USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 2 J411.G (4/07) PULSEJACK TM Gigjack T12 www.pulseeng.com Schematics JK0-0004 JK0-0036 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 3 J411.G (4/07) PULSEJACK TM Gigjack T12 www.pulseeng.com Schematics JK0654219 For More Information: Pulse Worldwide Headquarters Pulse Europe 12220 World Trade Dr. San Diego, CA 92128 U.S.A. www.pulseeng.com Einsteinstrasse 1 D-71083 Herrenberg Germany Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 7032 7806 0 Fax: 49 7032 7806 12 Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Tech-Innovation International Tenth Kejinan Rd. High-Tech Industrial Park Nanshan District, Shenzhen China Tel: 86 755 33966678 Fax: 86 755 33966700 Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Rd. Yang Mei Chen Tao Yuan Hsien Taiwan, R. O. C. Tel: 86 21 54643211/2 Fax: 86 21 54643210 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4641811 Fax: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2007. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com J411.G (4/07)