JKM-0011NL

PulseJack™ 1x1 Tab-DOWN RJ45 Description: 10/100 Base-TX RJ45 1x1 Tab-DOWN 8-pin Integrated Magnetics Connector, designed to support high volume cost-conscious consumer applications such as: ADSL modems, Cable modems, STB and Video on Demand. Features and Benefits: RoHS peak wave solder temperature rating 260°C Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Electrical Performance Summary: Meets IEEE 802.3 specification 350µH minimum OCL with 8mA bias current High performance for Max EMI suppression RoHS Compliant Part No. Turns Ratio Electrical Specifications @ 25°C - Operating Temperature - 0°C to +70°C Return Loss Crosstalk Common Mode Insertion (dB MIN) (dB MIN) Rejection Loss 100Ω ± 15Ω (dB MIN) (dB MAX) EMI¹ LEDs² Fingers (L/R) BST 30603060501-65MHz 1-10MHz 10-30MHz 60MHz 80MHz 1-30MHz 60MHz 100MHz 1-50MHz 150MHz Hipot (Vrms) Data Rate TX RX @60Hz 1 MIN JKM-0008NL 100BT 1CT:1 1CT:1 Yes G/Y Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500 JKM-0009NL 100BT 1CT:1 1CT:1 No G/Y Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500 JKM-0010NL 100BT 1CT:1 1CT:1 Yes None Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500 JKM-0011NL 100BT 1CT:1 1CT:1 No None Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500 Notes: LEDs Left/Right: G=Green, Y=Yellow. RJ45 Durability Testing Rating Mating Force (MAX) Unmating Force (MAX) Durability Part Number Plug to Jack Retention (MIN) JKM Series 5lbs./2.268kgs. 5Ibs./2.268kgs. 750 Insertions 20Ibs./9.075kgs. Shield Finish 20-40m inches Nickel over 10-20m inches Brass Part Number Material JKM Brass Series 1 Material Phosphor Bronze RJ45 Material Specification Contact Plating Area Nickel underplating and selective gold plating 15µ inches Networking.PulseElectronics.com Solder Area Tin matte finish Housing Material Specification Thermoplastic UL 94 V-0 MSL2 Rating 1 H434.A (03/19) PulseJack™ 1x1 Tab-DOWN RJ45 Mechanicals JKM-00XXNL LED Configuration JKM-00XXNL Green/Yellow LED Specification - (LEDs without internal resistors) 9 10 Left LED 2 12 11 Right LED Networking.PulseElectronics.com Standard LED Wavelength Forward* V(MAX) (TYP) Yellow Green 585 nm 565 nm 2.5 V 2.5 V 2.1 V 2.2 V * Assumes bias current = 20mA H434.A (03/19) PulseJack™ 1x1 Tab-DOWN RJ45 Schematic JKM-00XXNL TD+ 1 CT 1 TX+ 4 75Ω 2 RD+ 3 CT 5 RD- 6 2 TX- 1CT : 1 TRANSMIT 3 RX+ CABLE SIDE PCB SIDE TO PHY TD- 75Ω 6 RX1CT : 1 RECEIVE NC 7 4 75Ω 5 7 CHS GROUND 8 0.001µF 75Ω 8 NOTE: Connect CHS GND to PCB ground. For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 3 Networking.PulseElectronics.com J434.A (03/19)