JT4-1120HL

PulseJack­­™ 1X1 Tab-Down 10GBase-T RJ45 Designed to Support 10GBASE-T Transceivers Features and Benefits: Compliant with IEEE 802.3 standard Qualified with top 10Gig PHY Manufacturers RoHS peak wave solder temperature rating 260°C Low profile package for PCI Express Fine-tune magnetics to specific PHY vendors RoHS compliant and Halogen Free Electrical Specifications @ 25°C - Operating Temperature 0°C to 70°C Part Number Channel Option Insertion Loss (dB MAX) LEDs2 (L/R) 100 KHz Common to Differential Mode Rejection (dB MIN) Return Loss (dB MIN) 1-400 MHz 1-100 MHz 200 MHz 300 MHz 500 MHz Cross Talk (dB or better) 1-300 MHz 300-500 MHz 1-100 MHz 100-500 MHz Hipot (VDC MIN) JT4-1108HL* 5 G-Y/G -3.0 -2.0 -22.0 -16.5 -13.2 -9 -30 -22 -28 -19 2250 JT4-1109HL* 5 G-A/G-A -3.0 -2.0 -22.0 -16.5 -13.2 -9 -30 -22 -28 -19 2250 JT4-1120HL^ 4 G-Y/G -3.0 -2.0 -22.0 -16.5 -13.2 -9 -30 -22 -28 -19 2250 JT4-1128HL** 5 G-Y/G -3.0 -2.0 -22.0 -16.5 -13.2 -9 -30 -22 -28 -19 2250 JT4-1160HL* 5 G-Y/G -3.0 -2.0 -22.0 -16.5 -13.2 -9 -30 -22 -28 -19 2250 JT4-1173HL^ 4 G /Y-G -3.0 -2.0 -22.0 -16.5 -13,2 -9 -30 -22 -28 -19 2250 Notes: 1. LEDs: (Left/Right) G = green, Y = yellow, A = amber 2. PHY Vendors Approval - INTEL *, MARVELL **, BROADCOM^ RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) JT4 Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 20lbs./9.072 kgs. RJ45 Material Specification Shield 3 Contact Housing Part Number Material Finish Material Plating Area Solder Area Material Specification MSL2 Rating JT4 Series Brass 50-200µ inches thick nickel over brass Phosphor Bronze 50µ inches gold over 30-50µ inches nickel 200-500µ inches tin over 50-100µ inches nickel Thermoplastic UL 94 V-0 1 Notes: 1. Connector dimensions comply with FCC dimension requirements 2. MSL - Moisture Sensitivity Level 3. All parts are tin matte finish over nickel 1 PulseElectronics.com J425.O (3/22) PulseJack­­™ 1X1 Tab-Down 10GBase-T RJ45 Designed to Support 10GBASE-T Transceivers Mechanicals JT4-1108HL, JT4-1109HL, JT4-1120HL, JT4-1128HL, JT4-1160HL, JT4-1173HL JT4-XXXXHL 15 14 12 11 10 13 9 8 7 6 5 4 3 2 1 15 14 12 11 10 13 9 8 7 18 16 19 16 19 17 20 17 21 18 SUGGESTED FOOTPRINT (JT4-1108HL SIDE SHOWN) SUGGESTED FOOTPRINT (JT4-1109HL THE FOLLOWING TOLERANCES APPLY: SIDE SHOWN) _0.08 [±.003] THE FOLLOWING TOLERANCES APPLY: x.xx [.xxx] = ±.008 [±.003] JT4-1108/1128/1160HL JT4-1109HL SUGGESTED FOOTPRINT (JT4-1108HL SIDE SHOWN) THE FOLLOWING TOLERANCES APPLY: _0.08 [±.003] THE FOLLOWING TOLERANCES APPLY: x.xx [.xxx] = ±.008 [±.003] 2 PulseElectronics.com 12 11 10 6 6 5 4 3 2 1 SUGGESTED FOOTPRINT (JT4-1109HL SIDE SHOWN) 5 4 9 3 8 2 7 1 15 16 13 17 14 SUGGESTED FOOTPRINT (JT4-1120HL SIDE SHOWN) SUGGESTED FOOTPRINT (JT4-1120HL SIDE SHOWN) THE FOLLOWING TOLERANCES APPLY: _0.08 [±.003] THE FOLLOWING TOLERANCES APPLY: x.xx [.xxx] = ±.008 [±.003] JT4-1120HL J425.O (3/22) PulseJack™ 1X1 Tab-Down 10GBase-T RJ45 Designed to Support 10GBASE-T Transceivers Schematics JT4-1108HL, JT4-1109HL JT4-1160HL JT4-1120HL JT4-1128HL 3 PulseElectronics.com J425.O (3/22) PulseJack™ 1X1 Tab-Down 10GBase-T RJ45 Designed to Support 10GBASE-T Transceivers Schematic JT4-1173HL LED SPECIFICATIONS LED SPECIFICATION FOR JT4-1108/28/60HL LED SPECIFICATION FOR JT4-1109HL LED SPECIFICATION FOR JT4-1120HL LED SPECIFICATION FOR JT4-1730HL For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-apps-europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2022. Pulse Electronics, Inc. All rights reserved. 4 PulseElectronics.com J425.O (3/22)