JW0-0009NL

PulseJack -Single port Ethernet over stacked 2x1 USB TM Description: RJ45/Dual USB Combo is a Through Hole (THT) Integrated Connector Module with a single RJ45 in combination with 2xUSB ports. The internal magnetics are designed to support 10/100 and 1000Base-TX applications such as LAN-on-Motherboard (LOM) and PC applications. Features and Benefits: RJ45 connection meets CAT 6 standards USB module complies with USB 2.0/3.0 standards RoHS peak wave solder temperature rating 260°C Electrical Performance Summary: Meets IEEE 802.3u/ab.af specification High performance for maximum EMI suppression Minimum 1500Vrms isolation per IEEE 802.3 requirement Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C RoHS Compliant Part Number Data Rate Turn Ratio USB Style LEDs Insertion Loss TX/RX (dB MAX) L/R1 1-65 MHz 1-10 MHz 30 MHz 60-80 MHz 1-10 MHz 32-60 MHz 60-100 MHz 1-50 MHz 50-130 MHz @60Hz 1 MIN Return Loss @ 100Ω ±15Ω (dB TYP) Common Mode Rejection (dB TYP) Cross talk (dB MIN) Hipot (Vrms) (MIN) JXD4-4001NL3 10/100 (PoE) 1CT:1 USB2.0 G/Y -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 JD4-4003NL 10/100 (AutoMDIX) 1CT:1 USB2.0 G-O/Y -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 JW0-0009NL 10/100 (5 core) 1CT:1 USB2.0 G/Y JW0-0006NL 10/100/1000 1CT:1 JW0-0013NL 10/100/1000 JD4-0012NL 10/100/1000 -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 USB2.0 G/G-Y 2 -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 1CT:1 USB2.0 G-O/Y -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 1CT:1 USB3.0 Y/G-O -1.0 -20 -16 -12 -40 -35 -30 -30 -20 1500 2 Notes: 1. LEDs Left/Right: G = green; Y = yellow; O = Orange 2. G = Green with 250Ω internal resistor; Y = Yellow with 250Ω internal 3. Operating Temperature = 40°C to +85°C RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) JW0/JD4/JXD4 Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 500 Insertions 20 Ibs./9.072 kgs. RJ45 Material Specification Part Number JW0/JD4/JXD4 Series Shield Contact Material Finish Material Plating Area Brass 20-40µ inches thick Nickel over brass Phosphor Bronze 15µ inches gold over 30-80µ inches nickel Housing Solder Area 3 Material 75-300µinches tin-lead over Thermoplastic 75-300µinches bright nickel Specification MSL2 Rating UL 94 V-0 1 Notes: 1. Connector dimensions comply with FCC dimension requirements 2. MSL = Moisture Sensitivity Level 3. NL parts are tin matte finish over nickel 1 PulseElectronics.com J408.K (6/23) PulseJack -Single port Ethernet over stacked 2x1 USB TM Mechanical JD4-4003NL 10 9 8 6 Weight . . . . . . . . . . . 8.1 grams Tray . . . . . . . . . . . . . . . 25/tray 2 PulseElectronics.com Dimensions: mensions: mm 5 2 7 4 3 1 1 2 3 4 USB Port (Top) 1 2 3 4 USB Port (Bottom) Unless otherwise specified, all tolerances are ± 0,25 J408.K (6/23) PulseJack -Single port Ethernet over stacked 2x1 USB TM Mechanical JXD4-4001NL USB2.0 Weight . . . . . . . . . . . 8.1 grams Tray . . . . . . . . . . . . . . . 25/tray 3 PulseElectronics.com Dimensions: mensions: mm Unless otherwise specified, all tolerances are ± 0,25 J408.K (6/23) PulseJack -Single port Ethernet over stacked 2x1 USB TM Mechanical JXD4-4012NL USB 3.0 Weight . . . . . . . . . . . 8.1 grams Tray . . . . . . . . . . . . . . . 25/tray 4 PulseElectronics.com Dimensions: mm Unless otherwise specified, all tolerances are ± 0,25 J408.K (6/23) PulseJack -Single port Ethernet over stacked 2x1 USB TM Mechanical JW0-0006NL, JW0-0009NL, JW0-0013NL 0.15 USB2.0 Weight . . . . . . . . . . .8.1 grams Tray . . . . . . . . . . . . . . . 25/tray 5 PulseElectronics.com Dimensions: mensions: mm Unless otherwise specified, all tolerances are ± 0,25 J408.K (6/23) PulseJack -Single port Ethernet over stacked 2x1 USB TM Schematic JD4-4003NL JXD4-4001NL 6 PulseElectronics.com J408.K (6/23) PulseJack -Single port Ethernet over stacked 2x1 USB TM Schematic JW0-0009NL P CB PHY SID E C B E SID E JXD4-4012NL 10＆ SHIELD 7 PulseElectronics.com J408.K (6/23) PulseJack -Single port Ethernet over stacked 2x1 USB TM Schematic JW0-0006NL JW0-0013NL 8 PulseElectronics.com J408.K (6/23) PulseJack -Single port Ethernet over stacked 2x1 USB TM USB/RJ45 Application Note This line of Integrated Connector Modules are specifically designed for the implementation of a 10Base-T, 100BaseTX and 1000Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5/5e). The connectors provide excellent EMI filtering and are suitable for Desktop PC, Embedded Systems and Multiport Applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100/1000 solutions, thereby assuring compatibility with each transceiver. JW0, JD4 and JXD4 series meet the stringent open circuit inductance requirements of IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350µH. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with minimal attenuation and fast rise times to minimise system level jitter. JW0-0013NL PCB Layout Recommendations: 2. Connections to ground should be as short as possible. 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50W connections. 3. Connections between the 10/100/1000 IC and the connector should be direct (ideally no change in direction) and of minimum length. For More Information: Americas - prodinfo_network_americas@yageo.com | Europe - prodinfo_network_emea@yageo.com | Asia - prodinfo_network_asia@yageo.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2023. Pulse Electronics, Inc. All rights reserved. 9 PulseElectronics.com J408.K (6/23)