JX30-0005NLT

PulseJack TM Surface Mount 1x1 Description: 10/100Base-TX surface mount RJ45 single port (1x1) Tab-UP/DOWN with or without LEDs Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network Interface Cards (NIC). Features and Benefits: RoHS peak reflow temperature rating 245°C J0C SMT product, reduced size and low cost alternative to JV series SMT Contacts Electrical Performance Summary: JV0 Meets IEEE 802.3 specification High performance for maximum EMI suppression Minimum 1500Vrms isolation per IEEE 802.3 requirement J0C J30 Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C Turns Ratios RoHS Compliant Part No. J0C-0003NL J0C-0004NL J0C-0005NL J0C-0006NL JV006I21NL JV011I21NL JV026I21NL J3006G21DNL J3011G21DNL J3018G21KNL J3026G01DNL J3026G21DNL JX30-0005NL3 Tab Option Up/Down TX RX 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CTS:1 1CT:1 1CT:1 1CTS:1.414 1CTS:1 1CTS:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 1CT:1 Down Down Down Down Down Down Down Up Up Up Up Up Up LEDs L/R BST Circuit 1 No No No No No No No G/Y G/Y G/G G/Y G/Y G/Y No No Yes Yes No Yes Yes No Yes Yes Yes Yes Yes EMI Finger No Yes No Yes Yes Yes Yes Yes Yes Yes No Yes Yes Return Loss (dB MIN) 100W (± 15W) Insertion Loss (db MAX) Common Mode Rejection (dB MIN) Crosstalk (db MIN) Hipot (Vrms MIN) 1-65 MHz 1-10 MHz 30 MHz 60-80 MHz 1-10 MHz 30-60 MHz 60-100 MHz 1-50 MHz 50-130 MHz @ 60 Hz 1 MIN -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -18 -18 -18 -18 -20 -20 - 20 -20 -20 -20 -20 -20 -20 -14 -14 -14 -14 -16 -16 -16 -16 -16 -16 -16 -16 -16 -10 -10 -10 -10 -12 -12 -12 -12 -12 -11.5 -12 -12 -12 -35 -35 -35 -35 -40 -40 -40 -40 -40 -40 -40 -40 -40 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -35 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -30 -20 -20 -20 -20 -30 -30 -30 -30 -30 -30 -30 -30 -30 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 -20 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 NOTES: 1. LEDs Left/Right: G = green; Y = yellow. 2. Add suffix “T” for Tape & Reel option (e.g. J0C-0004T). 3. Extended Temperature: -40° to 85° C RJ45 Durability Testing Rating Mating Force Part Number (MAX) Unmating Force Durability (MAX) Plug to Jack Retention (MIN) J0C/JV/J3 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs. Shield Part Number Material Finish Material J0C/JV/J3 20-40µ inches thick nickel Phosphor Brass Series over Brass Bronze RJ45 Material Specification Contact Housing 3 5 Plating Area Solder Area Material Specification (X)µ inches gold over 30-80µ inches nickel Notes: 1. Connector dimensions comply with FCC part 68 dimension requirements. 2. MSL=Moisture Sensitivity Level rating: 1-5 (highest rating = 1, lowest rating = 5). 3. (X)=30µ inches gold for JV and J30 platforms and 15µ inches gold for J0C platform. USA 858 674 8100  Germany 49 7032 7806 0 www.pulseeng.com  Singapore 65 6287 8998  Tin matte finish UL 94 V-0 14 4. The MSL rating for J0C-000X is Level 4. All other connectors are Level 1. 5. NL parts are tin matte finish over nickel. Shanghai 86 21 62787060 1 High Temp. Thermoplastic 2 MSL Rating  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM ������������������������������������������� ������������������������������������� �������������������������������������������� Surface Mount 1x1 J0C Platform Schematics J0C-0003NL/04NL J0C-0005NL/06NL ������� ������� ������� ������� ������ ������ �� ������� ������� ������ ������� ������� ����� ������� ��������������� ����� �������� ������� ������ �� ������� �������� � ��� � ��������������������������������� ��������������������������������������������������� ������������������������������������������  Singapore 65 6287 8998 � ������� � www.pulseeng.com � �� � Germany 49 7032 7806 0 ������� ����� ������� ������ �  ������� � ������ USA 858 674 8100 ������� ����� �������� ���������� ������� ������� ���������� ��������������� �������  Shanghai 86 21 62787060 2  � �� China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 JV Platform Schematics JV006 ��������� ���������������������� ��������� ���������������������� JV011 USA 858 674 8100  Germany 49 7032 7806 0 www.pulseeng.com  ��������� ���������������������� JV026 Singapore 65 6287 8998  Shanghai 86 21 62787060 3  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 J3 Platform Schematics J3006 ��������� ���������������������� ��������� ���������������������� J3011 JX30-0005NL J3018/J3026 USA 858 674 8100  ���������������������� ��������� Germany 49 7032 7806 0 www.pulseeng.com  Singapore 65 6287 8998  Shanghai 86 21 62787060 4 ��������� ����� ���������������������� �����  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 J0C Platform Mechanicals J0C-0004NL/06NL (J0C-0003NL/05NL - Same platform without EMI Fingers EMI Fingers USA 858 674 8100  Germany 49 7032 7806 0 www.pulseeng.com  Singapore 65 6287 8998  Shanghai 86 21 62787060 5  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 JV Platform Mechanicals JV Series �������� ��������� ����������������� Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100  Germany 49 7032 7806 0 www.pulseeng.com  Singapore 65 6287 8998  Shanghai 86 21 62787060 6  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 J3 Platform Mechanical J3 Series JX30-0005NL & J3026G21D With EMI Tabs ��������� ��������� ����������������� ���������� ��������� ��������� ����������������� Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 USA 858 674 8100  Germany 49 7032 7806 0 www.pulseeng.com  Singapore 65 6287 8998  Shanghai 86 21 62787060 7  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 J0C Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics Modules has been specifically designed for the implementation of a 10Base-T and 100Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5e and 6). minimal attenuation and fast rise times to minimize system level jitter. The 1X1 SMT RJ45 connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10mm (0.004”) The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. NOTE: Modules are packaged in trays, unless Tape & Reel is specified (ex: J0C-0003NL for Trays and J0C-0003NLT for Tape & Reel). The JC0 series meets the stringent open circuit inductance requirements imposed by IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350µH. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with J0C-0003NL/04NL Connector PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50W connections. USA 858 674 8100  Germany 49 7032 7806 0 www.pulseeng.com  Singapore 65 6287 8998 2. Connections to ground should be as short as possible. 3. Connections between the 10/100 IC and the SMT connector should be direct (ideally no change in direction) and of minimum length.  Shanghai 86 21 62787060 8  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 JV Application Note This line of 10/100Base-TX SMT RJ45 1X1 Connector Magnetics Modules has been specifically designed for the implementation of a 10Base-T and 100Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5e and 6). minimal attenuation and fast rise times to minimize system level jitter. The 1X1 SMT RJ45 connectors manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The SMT are robust enough to withstand convection and infrared reflow solder temperatures. Additionally, compliant leads provide excellent solder-joint reliability with a coplanarity of 0.10mm (0.004”) The connectors provide excellent EMI filtering and are suitable for adapter card and multiport applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100 solutions, thereby assuring compatibility with each transceiver. NOTE: Modules are packaged in trays, unless Tape & Reel is specified. Please add the suffix “T” for Tape & Reel orders (ex: JV006I21T). Add the suffix “NL” for RoHS compliant parts (ex: JV006I21NL for Trays and JV006I21NLT for Tape & Reel). The JV series meets the stringent open circuit inductance requirements imposed by IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350µH. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with ������������������ ������ ������ ��� ������� �������������� ������ ������� ������� ������ � ��� � ��� � ��� � ���� � ������� � � � � � � � � ������ � ��� ������ ������ �� ������� ���� ������ �������������� ������� ���������� ����������� ����������������������������������� PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50W connections. USA 858 674 8100  Germany 49 7032 7806 0 www.pulseeng.com  Singapore 65 6287 8998 2. Connections to ground should be as short as possible. 3. Connections between the 10/100 IC and the SMT connector should be direct (ideally no change in direction) and of minimum length.  Shanghai 86 21 62787060 9  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 J0C Packaging Specifications J0C Series Weight...............7.07 grams Tape & Reel............. 90/reel Tray......................... 80/tray Tape.................... 44x32mm Tube....................... 25/tube ��������������������������� ������������������ USA 858 674 8100  Germany 49 7032 7806 0 www.pulseeng.com  Singapore 65 6287 8998  Shanghai 86 21 62787060 10  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 JV Packaging Specifications JV Series Weight.................6.6 grams Tape & Reel........... 150/reel Tray......................... 45/tray Tape.................... 44x32mm ��������������������������� ������������������ USA 858 674 8100  Germany 49 7032 7806 0 www.pulseeng.com  Singapore 65 6287 8998  Shanghai 86 21 62787060 11  China 86 755 33966678  Taiwan 886 3 4643715 J409.I (6/10) PulseJack TM Surface Mount 1x1 J3 Packaging Specifications J3 Series Weight.................8.1 grams Tape & Reel............. 75/reel Tray......................... 45/tray Tape.................... 56x32mm ��������������������������� ������������������ For More Information: Pulse Worldwide Headquarters Two Pearl Buck Court Bristol, PA 19007 U.S.A. www.pulseeng.com Tel: 215 781 6400 Fax: 215 781 6403 Pulse Europe Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia Einsteinstrasse 1 D-71083 Herrenberg Germany B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Rd. High-Tech Zone Nanshan District Shenzen, PR China 518057 Tel: 86 755 33966678 Fax: 86 755 33966700 Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Rd. West Shanghai 200336 China 135 Joo Seng Rd. #03-02 PM Industrial Bldg. Singapore 368363 No. 26, Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan R. O. C. Tel: 86 21 62787060 Fax: 86 2162786973 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4643715 Fax: 886 3 4641911 Tel: 49 7032 7806 0 Fax: 49 7032 7806 135 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2009. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com 12 J409.I (6/10)