JXR1-0015NL

PulseJack™ 1X1 Tab-Up RJ45 100 Base-TX RJ45 1X1 Tab-Up 8 pin Integrated Magnetics Connector, designed for industrial rated applications and is suitable for reflow solder mounting. Features and Benefits: High Temperature rated parts designed for use in Pin-in-Paste processing with 260�C max reflow temperature Meets IEEE802.3 specification 350μH minimum OCL with 8mA DC bias current Extended Temperature range from -40�C to 85�C Electrical Specifications @ 25°C - Operating Temperature -40°C to +85°C Return Loss (dB TYP) CCMR (dB TYP) Crosstalk (db TYP) Part Number 1 EMI Fingers LED (L/R) Insertion Loss 1 - 65MHz (dB TYP) JXR1-0001NL YES - -1.0 -20 -16 -10 -30 -20 -40 -35 -30 1500 JXR1-0005NL NO - -1.0 -20 -16 -10 -30 -20 -40 -35 -30 1500 JXR1-0011NL YES G/Y -1.0 -20 -16 -10 -30 -20 -40 -35 -30 1500 JXR1-0015NL NO G/Y -1.0 -20 -16 -10 -30 -20 -40 -35 -30 1500 1 - 10 MHz 30 MHz 60 - 80 MHz 1 - 50 MHz 50 - 130 MHz 1 - 10 MHz 30 - 60 MHz 60 - 100 MHz Hipot (Vrms) Notes: 1. When ordering JXR0-0011NL supplied in Tape and Reel, please add a “T” on the end of the part code - e.g. JXR1-0011NL becomes JXR1-0011NLT. 2. Maximum Reflow Solder Temperature: 2x SRP 260�C for 5 seconds with LEDs and 2x SRP 260�C for 10 seconds without LEDs RJ45 Durability Testing Rating Part Number Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) JXR1 - Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 20 Ibs./9.072 kgs. RJ45 Material Specification Shield Contact MSL 2 Housing Part Number Material Finish Material Plating Area Solder Area Material Specification Rating JXR1 - Series Brass 10-20m inches Nickel over 10-20m inches Brass Phosphor Bronze Nickel underplating and selective gold plating 30μ inches Matte Tin finish over Nickel Thermoplastic UL 94 V-0 3 Notes: 1. Connector dimensions comply with FCC dimension requirements. 2. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest rating = 1, lowest rating = 5). 1 Networking.PulseElectronics.com J437.D (03/19) PulseJack™ 1X1 Tab-Up RJ45 100 Base-TX RJ45 1X1 Tab-Up 8 pin Integrated Magnetics Connector, designed for industrial rated applications and is suitable for reflow solder mounting. Mechanicals JXR1-0001/JXR1-0011NL Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 RECOMMENDED PANEL CUTOUT 2 Networking.PulseElectronics.com RECOMMENDED PCB LAYOUT VIEWED FROM COMPONENT SIDE PCB LAYOUT DIMENSIONS REFERENCED TO PIN#1 AND ±.003 UNLESS OTHERWISE SPECIFIED J437.D (03/19) PulseJack™ 1X1 Tab-Up RJ45 100 Base-TX RJ45 1X1 Tab-Up 8 pin Integrated Magnetics Connector, designed for industrial rated applications and is suitable for reflow solder mounting. Mechanicals (continued) JXR1-0005/JXR1-0015NL Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 RECOMMENDED PCB LAYOUT VIEWED FROM COMPONENT SIDE RECOMMENDED PANEL CUTOUT 3 Networking.PulseElectronics.com PCB LAYOUT DIMENSIONS REFERENCED TO PIN#1 AND ±.003 UNLESS OTHERWISE SPECIFIED J437.D (03/19) PulseJack™ 1X1 Tab-Up RJ45 100 Base-TX RJ45 1X1 Tab-Up 8 pin Integrated Magnetics Connector, designed for industrial rated applications and is suitable for reflow solder mounting. Tape and Reel Specification Part placed in compartment marking side uppermost. 4.00±0.10 32.00±0.10 2.00±0.15 Ѕ   22.00 20.20±0.15 40.40±0.10 44.00±0.30 1.75±0.10 USER DIRECTION OF FEED Networking.PulseElectronics.com 21.55 18.75 JXR1-00xxNLT = TAPE and REEL .............80 parts/reel JXR1-00x1NL = TUBE .......................................25 parts JXR1-00x5NL = TUBE .......................................30 parts 15.25 16.80 PACKING SPECIFICATION: 4 0.20±0.05 16.00 25.9 R0.75 Dimensions: given in mm Unless otherwise specified, all tolerances are ±0.15 REEL SPECIFICATION in mm A = Ø 360.0 ±/-2.0 B = Ø 100.0 ±/-0.5 C = Ø 45.4 ±/-1.0 D = Ø 50.4 ±/-1.0 C = Ø 13.1 ±/-0.3 D = Ø 21.0 ±/-0.5 J437.D (03/19) PulseJack™ 1X1 Tab-Up RJ45 100 Base-TX RJ45 1X1 Tab-Up 8 pin Integrated Magnetics Connector, designed for industrial rated applications and is suitable for reflow solder mounting Electrical Schematic TD+ 1 CT 3 TD- 2 LED Specification 1 TX+ YELLOW 9 TX- RD+ 7 3 RX+ CT 6 RD- 8 CABLE SIDE PCB SIDE TO PHY 10 2 1CT : 1 TRANSMIT GREEN 12 11 6 1CT : 1 RECEIVE 75 RX- Emmitted Color 75 4 Green Yellow 585 nm 2.1 V 8 to 12 TYP. 8 to 12 TYP. @ 20mA @ 20 mA 100� 100� Power Dissipation (Pd) 68 mW MAX 68 mW MAX DC Forward Current 25 mA MAX 30 mA MAX Reverse Voltage (Vr) 5.0 V MAX 5.0 V MAX Wavelength (nm) 75 4 5 C1 0.001 uF 75 CHS GROUND 5 Brightness (mCD) 7 8 NOTE: Connect CHS GND to PCB ground Viewing Angle For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 5 Networking.PulseElectronics.com J437.D (03/19)