P0106NL

LOW PROFILE SELF-LEADED POWER INDUCTORS Designed for PCMCIA Applications Small PCMCIA size (.38" X .43" X .098") Frequency range: 100 kHz to 1 MHz Up to 3 amps rated DC current Surface mount, pick and placeable Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C ID Part Number Hookup IDC (amp) Reference Values L @ DC LDC (µH) P0108 P0107 P0106 P0116 P0108 P0105 P0107 P0104 P0106 P0103 P0116 P0102 P0101 P0105 P0100 P0104 P0103 P0102 P0101 P0100 Series Series Series Series Parallel Series Parallel Series Parallel Series Parallel Series Series Parallel Series Parallel Parallel Parallel Parallel Parallel 0.27 0.33 0.40 0.44 0.54 0.62 0.66 0.73 0.80 0.86 0.88 1.03 1.23 1.24 1.41 1.46 1.72 2.06 2.46 2.82 122.6 88.5 60.1 43.6 30.7 20.1 22.1 15.7 15.0 12.1 10.9 9.0 6.4 5.0 5.2 3.9 3.0 2.2 1.6 1.3 ET (V-µsec) 16.55 14.60 12.03 9.59 8.28 6.22 7.30 5.74 6.01 5.21 4.80 4.63 3.92 3.11 3.67 2.87 2.60 2.32 1.96 1.83 Control Values L W/O DC DCR (MAX) L0 ±20% (mΩ) (µH) 137.8 100.5 69.1 46.9 34.4 21.6 25.1 17.3 17.3 13.5 11.7 10.1 7.2 5.4 6.0 4.3 3.4 2.5 1.8 1.5 NOTES: 1. The reference inductance at rated DC current is a typical value. 2. Temperature rise is 50°C in typical buck or boost circuits at 500 kHz and with the reference ET applied to the inductor. 3. Total loss in the inductor is 95 mWatts for 50°C temperature rise above ambient. 4. To estimate temperature rise in a given application, determine copper and core losses, divide by 95 and multiply by 50. 5. For the copper loss, calculate IDC2 X RN. 6. For RN, multiply DCRMAX by 0.85. 1545 1068 720 692 382 325 267 236 180 170 173 121 86 81 66 59 42 30 22 16 1 .380 MAX 9,65 2 3 P01XX Date Code Country of Origin 5 4 .150 3,81 .300 7,62 1 3 .080 2,03 .098 MAX 2,49 .300 7,62 .150 3,81 .335 8,51 .004/0,10 4 SURFACES 102.50 87.55 72.60 59.79 51.25 40.57 43.77 36.30 36.30 32.03 29.89 27.76 23.49 20.29 21.35 18.15 16.01 13.88 11.74 10.68 Schematic .050 1,27 6 2.77 2.37 1.96 1.62 1.38 1.10 1.18 0.98 0.98 0.87 0.81 0.75 0.63 0.55 0.58 0.49 0.43 0.38 0.32 0.29 7. For core loss, using frequency (f) and operating flux density (B), calculate 747 x 10-21 x B2.7 x f2.04. 8. For flux density (B), calculate ET (V-µsec) for the application, divide by ET100 from the table, and multiply by 100. 9. Limit the DC bias (H) to 31 orsteds. Calculate H by multiplying H1 from the table by IDC of the application. 10. Add suffix "T" to part number for tape and reel package (i.e. P0100T). Mechanical .430 MAX 10,92 Calculation Data 100 Gauss 1 Amp DC ET100 H1 (V-µsec) (Orsted) SUGGESTED PAD LAYOUT For More Information : 4 6 Weight .............0.25 grams Tape & Reel .......1250/reel Tube ......................55/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 UNITED STATES (Worldwide) UNITED KINGDOM (Northern Europe) FRANCE (Southern Europe) SINGAPORE (Southern Asia) TAIWAN, R.O.C. (Northern Asia) HONG KONG (China/Hong Kong) 12220 World Trade Drive San Diego, CA 92128 U.S.A. http://www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 1 & 2 Huxley Road The Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 6287 8998 FAX: 65 6280 0080 3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan, R.O.C. Tel: 886 2 2698 0228 FAX: 886 2 2698 0948 9/F, Phase 2, Tai Sang Shatin Warehouse Centre 6 Wong Chuk Yeung Street Fotan, Shatin, Hong Kong TEL: 852 2788 6588 FAX: 852 2776 1055 DISTRIBUTOR Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Printed on recycled paper. ©2003, Pulse Engineering, Inc. P597.A (5/03)