PA1005.070NL

SMT Current Sense Transformers PA1005.XXXNL and PM2165.XXXNL Height: 5.5mm Max Footprint: 8.4mm x 7.2mm Max Current Rating: up to 20A Frequency Range: 20kHz to 1MHz Low Primary DCR version of P820X Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C Part Number Turns Ration Current Rating2 (A) Secondary Inductance (mH MIN) DCR (mΩ MAX) Primary (8-7) Secondary (1-3) Hipot (VRMS) Commerical Automotive PA1005.020NL PM2165.020NL 1:20 20 0.08 0.75 550 1000 PA1005.030NL PM2165.030NL 1:30 20 0.18 0.75 870 1000 PA1005.040NL PM2165.040NL 1:40 20 0.32 0.75 1140 1000 PA1005.050NL PM2165.050NL 1:50 20 0.5 0.75 1500 1000 PA1005.060NL PM2165.060NL 1:60 20 0.72 0.75 2250 1000 PA1005.070NL PM2165.070NL 1:70 20 0.98 0.75 4750 1000 PA1005.100NL PM2165.100NL 1:100 20 2.00 0.75 5500 1000 PA1005.125NL PM2165.125NL 1:125 20 3.00 0.75 6500 500 7 Notes: 1. The temperature of component (ambient temperature plus temper-ature rise) must be within the specified operating temperature range. 2. The maximum current rating is based upon temperature rise of the component and represents the DC current which will cause a typical temperature rise of 40°C with no airflow. 3. To calculate value of terminating resistor (Rt) use the following formula: Rt (W) = Vref * N /(Ipeak_primary) 4. The peak flux density of the device must remain below 2000 Gauss. To calculate the peak flux density for uni-polar current use following formula: Bpk = 37.59 * Vref * (Duty_Cycle_Max) * 105 / (N * Freq_kHz) * for bi-polar current applications divide Bpk (as calculated above) by 2. 5. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e. PA1005.020NL becomes PA1005.020NLT). Pulse complies to industry standard tape and reel specification EIA481. 6. The “NL” suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the “NL” suffix, but an RoHS compliant version is required, please contact Pulse for availability. 1 Power.PulseElectronics.com 7. The PM2165.XXXNL part numbers are AEC-Q200 and IATF16949 certified. The mechanical dimensions are 100% tested in production but do not necessarily meet aproduct capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP. SPM2007_58 (08/20) SMT Current Sense Transformers PA1005.XXXNL and PM2165.XXXNL Mechanical Schematic Weight ...........................0.34grams Dimensions: .Inches mm Tape & Reel ........................900/reel Unless otherwise specified, ..010 Tray .....................................120/tray all tolerances are: ± 0,25 TAPE & REEL INFO PART NUMBER SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) A G P1 W K0 PA1005.XXXNLT/PM2165.XXXNLT 2 Power.PulseElectronics.com Ø330 16.4 12 16 5.65 SPM2007_58 (08/20) QTY PCS/REEL 900