PA1292.152NL

SMT Power Inductors Planar - PA1X9XNL Series Height: 7.4mm Footprint: 19.8mm x 19.6mm Max Current Rating: up to 73A Inductance Range: .405µH to 6.2µH Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C8 Inductance @ Irated (µH ± 15%) Irated1 (ADC) 25°C 100°C Heating Current3 (A) TYP MAX PA1294.450NL 0.45 73 .38 .48 0.45 95 80 73 PA1294.650NL 0.63 54 .38 .48 0.65 63 53 73 PA1294.910NL 0.85 39 .38 .48 0.91 46 37 73 PA1294.112NL 1.05 30 .38 .48 1.10 35 30 73 PA1294.132NL 1.25 25 .38 .48 1.30 29 26 73 PA1294.152NL 1.45 21 .38 .48 1.50 24 22 73 PA1292.450NL * 0.45 52 .78 .98 0.45 95 80 52 PA1292.650NL 0.63 52 .78 .98 0.65 63 53 52 PA1292.910NL * 0.85 39 .78 .98 0.91 46 37 52 PA1292.112NL 1.05 30 .78 .98 1.10 35 30 52 PA1292.132NL 1.25 25 .78 .98 1.30 29 26 52 PA1292.152NL * 1.45 21 .78 .98 1.50 24 22 52 PA1393.102NL 0.95 42 1.15 1.43 1.0 68 54 42 PA1393.152NL 1.40 36 1.15 1.43 1.5 43 35 42 PA1393.202NL 1.90 25 1.15 1.43 2.0 29 25 42 PA1393.252NL 2.40 20 1.15 1.43 2.5 23 21 42 PA1393.302NL 2.80 15 1.15 1.43 3.0 18 16 42 PA1393.352NL 3.40 12 1.15 1.43 3.5 15 13 42 PA1494.162NL 1.60 37 1.44 1.80 1.60 55 43 37 PA1494.242NL 2.40 30 1.44 1.80 2.42 35 27 37 PA1494.362NL 3.30 17 1.44 1.80 3.60 20 18 37 PA1494.442NL 4.00 14 1.44 1.80 4.40 16 15 37 PA1494.532NL 4.90 11 1.44 1.80 5.34 13 12 37 PA1494.622NL 5.80 9 1.44 1.80 6.20 11 10 37 Part5,7 Number DCR (mΩ) Inductance @ 0 ADC (µH ± 15%) Saturation Current2 2-Turn (Low-Loss) Series 2-Turn Series 3-Turn Series 4-Turn Series 1 power.pulseelectronics.com SPM2007_39 (04/19) http://www.power.pulseelectronics.com/contact SMT Power Inductors Planar - PA1X9XNL Series Notes: 1. The rated current as listed is either 85% of the saturation current or the heating current, depending on which value is lower. 2. The saturation current is the current which causes the inductance to drop by 15% at the stated ambient temperatures (25°C and 100°C). This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. 3. The heating current is the DC current which causes the temperature of the part to increase by approximately 45°C. This current is determined by mounting the component on a PCB with .25” wide, 2 oz. equivalent copper traces, and applying the current to the device for 30 minutes with no forced air cooling. 4. In high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may necessitate derating the current in order to limit the temperature rise of the component. In order to determine the approximate 5. 6. 7. 8. total losses (or temperature rise) for a given application, the total copper and core losses should be taken into account. For approximate value of core losses, in a given application, use the core loss graph on page 24. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e. PA1294.450NL becomes PA1294.450NLT). Pulse complies to industry standard tape and reel specification EIA481. Meets solderability test per IPC/EIA J-STD-002B using flux type ORL0. The “NL” suffix indicates an RoHS-compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the “NL” suffix, but an RoHS compliant version is required, please contact Pulse for availability. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. * Contact Pulse for availability Mechanical PA1X9XNL Weight .....................10.8 grams MAX Tape & Reel ........................250/reel Dimensions: .Inches mm Unless otherwise specified, .010 all tolerances are: ±.0,25 Suggested Pad Layouts and Schematics 2 power.pulseelectronics.com SPM2007_39 (04/19) http://www.power.pulseelectronics.com/contact SMT Power Inductors Planar - PA1X9XNL Series Inductance vs. Current Characteristics (25°C) PA1X9XNL 3 power.pulseelectronics.com SPM2007_39 (04/19) http://www.power.pulseelectronics.com/contact SMT Power Inductors Planar - PA1X9XNL Series For More Information Pulse Worldwide Headquarters 15255 Innovation Drive Ste 100 San Diego, CA 92128 U.S.A. Tel: 858 674 8100 Fax: 858 674 8262 Pulse Europe Pulse Electronics GmbH Am Rottland 12 58540 Meinerzhagen Germany Pulse China Headquarters Pulse Electronics (ShenZhen) CO., LTD D708, Shenzhen Academy of Aerospace Technology, The 10th Keji South Road, Nanshan District, Shenzhen, P.R. China 518057 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 3 Fraser Street 0428 DUO Tower Singapore 189352 Pulse North Asia 1F., No.111 Xiyuan Road Zhongli District Taoyuan City 32057 Taiwan (R.O.C) Tel: 49 2354 777 100 Fax: 49 2354 777 168 Tel: 86 755 33966678 Fax: 86 755 33966700 Tel: 86 21 62787060 Fax: 86 2162786973 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4356768 Fax: 886 3 4356820 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 4 power.pulseelectronics.com SPM2007_39 (04/19) http://www.power.pulseelectronics.com/contact