High Isolation Power Transformers
PA200xNL Basic and Operational Insulation
1500Vrms isolation (380Vrms continuous)
Basic insulation (1.4mm creepage/clearance)
and operational available
Operating frequency: 50kHz and up
Electrical Specifications @ 25°C - Operating Temperature -40°C to 130°C5
Turns
Ratio
Pri-Sec
Isolation
(VRMS)
MAX1
V*µsec
Primary
Inductance
(µH MIN)
Leakage2
Inductance
(µH MAX)
DCR
Primary
(Ω MAX)
DCR
Secondary
(Ω MAX)
Package Size
(L x W x H)
(mm MAX)
PA2001NL
1:1
1500
12
403
0.46
0.60
0.60
8.6 x 6.7 x 2.5
PA2002NL
1:1:1
1500
60
1800
0.60
1.60
1.60
9.0 x 8.6 x 7.6
PA2004NL
1:1:1
1500
20
437
0.85
0.85
0.85
8.6 x 6.7 x 3.6
Part3,4
Number
OPERATIONAL INSULATION
BASIC INSULATION (1.4MM CREEPAGE AND CLEARANCE BETWEEN PRIMARY AND SECONDARY)
PA2005NL
1:1:1
1500
26
840
0.75
1.05
1.05
11.8 x 8.8 x 4.0
PA2006NL
1:1
1500
26
864
0.75
0.82
0.82
11.8 x 8.8 x 4.0
PA2007NL
1:1
1500
53
1490
0.80
1.15
1.15
9.0 x 8.6 x 7.6
PA2008NL
2:1:1
1500
52
1425
0.80
1.15
0.575
9.0 x 8.6 x 7.6
PA2009NL
2.5:1:1
1500
47
1486
0.80
1.15
0.425
9.0 x 8.6 x 7.6
Notes:
1. The maximum volt-µsec limits the peak flux density to 2800 Gauss when used in a
unipolar drive application. For bi-polar drive applications, a maximum volt-µsec of
two times this rating is acceptable (i.e. 2* (volt*µsec rating) Volt*µsec = (voltage
applied to the primary) * dutycycle / Frequency = V * alpha / Freq_ Hz = V * µsec
2. Leakage inductance is measured at primary terminals with all secondaries shorted.
3. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part
number (i.e. PA2002NL becomes PA2002NLT). Pulse complies to industry standard
tape and reel specification EIA481.
4.
5.
6.
The “NL” suffix indicates an RoHS-compliant part number.
The temperature of the component (ambient plus temperature rise) must be within
the stated operating temperature range.
Continuous isolation voltage confirmed by 125°C/1000hrs accelerated aging with the
bias voltage applied between primary and secondary windings.
Mechanical
Schematic
PA2001NL
0.365
9,27
.340
MAX
8,64
1
PA2001NL
Date Code
Country of Origin
4X
.100
2,54
.200
5,08
0.07
1,78
3
.098
MAX
2,49
4
.240
6,1
.005/0,13
4 SURFACES
1
6
.265
MAX
6,73
power.pulseelectronics.com
SUGGESTED PAD LAYOUT
P663. K (08/18)
1
6
3
4
Weight .........................0.28 grams
Tape & Reel .....................1500/reel
Tube ...................................60/tube
Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
Dimensions:
http://www.power.pulseelectronics.com/contact
High Isolation Power Transformers
PA200xNL Basic and Operational Insulation
Mechanicals (CONTINUED)
Schematics
PA2002NL
3
1
6
4
8
5
PA2002NL
Weight .........................0.60 grams
Tape & Reel ......................400/reel
Tube ...................................50/tube
Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
Dimensions:
Mechanicals
Schematics
PA2004NL
1
1
6
1
2
2
.355
9,27
.340
MAX
8,64
5
3
6
6
5
PA2004NL
Date Code
Country of Origin
.200
5,08
0.07
1,78
4
3
4X
.265
MAX
6,73
.140
3,56
.100 .070
2,54 1,78
.220
4
.240 5,59
6,1
.320
8,13
.005/0,13
4 SURFACES
2
.100
2,54
3
.140
MAX
3,56
power.pulseelectronics.com
4
.200
5,08
Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
Dimensions:
SUGGESTED PAD LAYOUT
P663. K (08/18)
Weight .........................0.23 grams
Tape & Reel ......................800/reel
Tube ...................................75/tube
http://www.power.pulseelectronics.com/contact
High Isolation Power Transformers
PA200xNL Basic and Operational Insulation
Mechanical (CONTINUED)
Schematic
PA2005NL, PA2006NL
PA2005NL
2
.430
10,92
.460
11,68
.070
1,78
.330
8,38
1
PA2005NL
PA2006NL
.340
8,64
5
3
6
6
4
.250
6,35
Date Code
Country of Origin
.320
8,13
.170
4,32
.330
8,38
1
3
.100
2,54
4
SUGGESTED PAD LAYOUT
.160
4,06
MAX
.005/0,13
6 SURFACES
PA2006NL
1
3
6
4
Weight ..........................0.48 grams
Tape & Reel ......................900/reel
Tube ...................................60/tube
Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
Dimensions:
Mechanicals
Schematics
PA2007NL, PA2008NL, PA2009NL
PA2008NL / PA2009NL
1
3
6
4
8
5
PA2007NL
1
8
4
5
Weight .........................0.60 grams
Tape & Reel ......................400/reel
Tube ...................................50/tube
Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
Dimensions:
3
power.pulseelectronics.com
* for PA2007NL the pads for pins 3 and 6 in the suggested pad layout
should not be used in the layout
P663. K (08/18) http://www.power.pulseelectronics.com/contact
High Isolation Power Transformers
PA200xNL Basic and Operational Insulation
For More Information
Pulse Worldwide
Pulse Europe
Headquarters
Pulse Electronics GmbH
15255 Innovation Drive Ste 100
Am Rottland 12
San Diego, CA 92128
58540 Meinerzhagen
U.S.A.
Germany
Tel: 858 674 8100
Fax: 858 674 8262
Tel: 49 2354 777 100
Fax: 49 2354 777 168
Pulse China Headquarters
Pulse Electronics (ShenZhen) CO., LTD
D708, Shenzhen Academy of
Aerospace Technology,
The 10th Keji South Road,
Nanshan District, Shenzhen,
P.R. China 518057
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Road West
Shanghai 200336
China
Pulse South Asia
3 Fraser Street
0428 DUO Tower
Singapore 189352
Pulse North Asia
1F., No.111 Xiyuan Rd
Zhongli City
Taoyuan City 32057
Taiwan (R.O.C)
Tel: 86 755 33966678
Fax: 86 755 33966700
Tel: 86 21 62787060
Fax: 86 2162786973
Tel: 65 6287 8998
Fax: 65 6280 0080
Tel: 886 3 4356768
Fax: 886 3 4356820
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may
be trademarks or registered trademarks of their respective owners. © Copyright, 2018. Pulse Electronics, Inc. All rights reserved.
4
power.pulseelectronics.com
P663. K (08/18)
http://www.power.pulseelectronics.com/contact
