PA2009NLT

High Isolation Power Transformers PA200xNL Basic and Operational Insulation 1500Vrms isolation (380Vrms continuous) Basic insulation (1.4mm creepage/clearance) and operational available Operating frequency: 50kHz and up Electrical Specifications @ 25°C - Operating Temperature -40°C to 130°C5 Turns Ratio Pri-Sec Isolation (VRMS) MAX1 V*µsec Primary Inductance (µH MIN) Leakage2 Inductance (µH MAX) DCR Primary (Ω MAX) DCR Secondary (Ω MAX) Package Size (L x W x H) (mm MAX) PA2001NL 1:1 1500 12 403 0.46 0.60 0.60 8.6 x 6.7 x 2.5 PA2002NL 1:1:1 1500 60 1800 0.60 1.60 1.60 9.0 x 8.6 x 7.6 PA2004NL 1:1:1 1500 20 437 0.85 0.85 0.85 8.6 x 6.7 x 3.6 Part3,4 Number OPERATIONAL INSULATION BASIC INSULATION (1.4MM CREEPAGE AND CLEARANCE BETWEEN PRIMARY AND SECONDARY) PA2005NL 1:1:1 1500 26 840 0.75 1.05 1.05 11.8 x 8.8 x 4.0 PA2006NL 1:1 1500 26 864 0.75 0.82 0.82 11.8 x 8.8 x 4.0 PA2007NL 1:1 1500 53 1490 0.80 1.15 1.15 9.0 x 8.6 x 7.6 PA2008NL 2:1:1 1500 52 1425 0.80 1.15 0.575 9.0 x 8.6 x 7.6 PA2009NL 2.5:1:1 1500 47 1486 1.20 1.15 0.425 9.0 x 8.6 x 7.6 Notes: 1. The maximum volt-µsec limits the peak flux density to 2800 Gauss when used in a unipolar drive application. For bi-polar drive applications, a maximum volt-µsec of two times this rating is acceptable (i.e. 2* (volt*µsec rating) Volt*µsec = (voltage applied to the primary) * dutycycle / Frequency = V * alpha / Freq_ Hz = V * µsec 2. Leakage inductance is measured at primary terminals with all secondaries shorted. 3. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e. PA2002NL becomes PA2002NLT). Pulse complies to industry standard tape and reel specification EIA481. 1 PulseElectronics.com 4. 5. 6. The “NL” suffix indicates an RoHS-compliant part number. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Continuous isolation voltage confirmed by 125°C/1000hrs accelerated aging with the bias voltage applied between primary and secondary windings. P663. L (04/21) High Isolation Power Transformers PA200xNL Basic and Operational Insulation Mechanical Schematic PA2001NL 0.365 9,27 .340 MAX 8,64 1 PA2001NL Date Code Country of Origin 4X .100 2,54 6 .265 MAX 6,73 3 .098 MAX 2,49 3 4 Dimensions: 4 .240 6,1 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .005/0,13 4 SURFACES 6 Weight .........................0.28 grams Tape & Reel .....................1500/reel Tube ...................................60/tube .200 5,08 0.07 1,78 1 SUGGESTED PAD LAYOUT Mechanicals Schematics PA2002NL 3 1 6 4 8 5 PA2002NL Weight .........................0.60 grams Tape & Reel ......................400/reel Tube ...................................50/tube Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 2 PulseElectronics.com P663. L (04/21) High Isolation Power Transformers PA200xNL Basic and Operational Insulation Mechanicals Schematics PA2004NL 2 .355 9,27 .340 MAX 8,64 1 1 6 1 5 3 6 6 2 5 PA2004NL Date Code Country of Origin .200 5,08 0.07 4 .140 3,56 4 .200 5,08 .100 2,54 1,78 3 4X .265 MAX 6,73 .100 .070 2,54 1,78 3 .220 Weight .........................0.23 grams Tape & Reel ......................800/reel Tube ...................................75/tube 4 .240 5,59 6,1 .140 MAX 3,56 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .320 8,13 .005/0,13 Dimensions: SUGGESTED PAD LAYOUT 4 SURFACES Mechanical Schematic PA2005NL, PA2006NL PA2005NL 2 .430 10,92 .460 11,68 .070 1,78 .330 8,38 1 .340 8,64 PA2005NL PA2006NL .250 6,35 3 .250 6,35 6 SURFACES 3 PulseElectronics.com 4 SUGGESTED PAD LAYOUT .160 4,06 MAX .005/0,13 6 4 .025 0,64 .100 2,54 .100 2,54 5 3 6 Date Code Country of Origin .330 8,38 1 PA2006NL 1 6 3 4 Weight ..........................0.48 grams Tape & Reel ......................900/reel Tube ...................................60/tube Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: P663. L (04/21) High Isolation Power Transformers PA200xNL Basic and Operational Insulation Mechanicals Schematics PA2007NL, PA2008NL, PA2009NL PA2008NL / PA2009NL 1 3 6 4 8 5 PA2007NL 1 8 4 5 Weight .........................0.60 grams Tape & Reel ......................400/reel Tube ...................................50/tube Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: * for PA2007NL the pads for pins 3 and 6 in the suggested pad layout should not be used in the layout For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved. 4 PulseElectronics.com P663. L (04/21)