PA4342.561NLT

SMT Power Inductor High Current Molded Power Inductor - PA4342.XXXNLT & PM4342.XXXNLT Series POWER PRODUCTS Height: 4.0mm Max Footprint: 11.5mm x 10.3mm Max Current Rating: up to 43.0A Inductance Range: 0.15uH to 68.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux 200Vdc Isolation between terminal and core Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C Automotive6,7 Commercial6,7 DC Resistance Rated3 Current TYP. MAX. Saturation2 Current uH A mΩ mΩ A Inductance5 100KHz, 1V PA4342.151NLT PM4342.151NLT 0.15* 43 0.5 0.6 75 PA4342.221NLT PM4342.221NLT 0.22 35 0.8 1.0 60 PA4342.271NLT PM4342.271NLT 0.27 33 0.82 1.0 60 PA4342.331NLT PM4342.331NLT 0.33 31 1.0 1.2 60 PA4342.361NLT PM4342.361NLT 0.36 31 1.05 1.2 60 PA4342.391NLT PM4342.391NLT 0.39 30 1.1 1.3 60 PA4342.451NLT PM4342.451NLT 0.45 29 1.3 1.5 45 PA4342.471NLT PM4342.471NLT 0.47 28 1.3 1.5 43 PA4342.561NLT PM4342.561NLT 0.56 25 1.6 1.8 40 PA4342.681NLT PM4342.681NLT 0.68 22 2.4 2.7 39 PA4342.881NLT PM4342.881NLT 0.88 20 2.5 2.9 38 PA4342.102NLT PM4342.102NLT 1.00 18 3.0 3.3 36 PA4342.122NLT PM4342.122NLT 1.20 17 3.3 3.8 33 PA4342.152NLT PM4342.152NLT 1.50 16 4.0 4.6 33 PA4342.222NLT PM4342.222NLT 2.20 12 6.5 7.0 27 PA4342.252NLT PM4342.252NLT 2.50 11.5 7.9 8.7 23 PA4342.332NLT PM4342.332NLT 3.30 11 10.8 11.8 20 PA4342.402NLT PM4342.402NLT 4.00 10.2 13 15 18 PA4342.472NLT PM4342.472NLT 4.70 10 15 15.5 17 PA4342.562NLT PM4342.562NLT 5.60 9.0 17 19.3 14 PA4342.682NLT PM4342.682NLT 6.80 8.5 17.5 23.3 13.5 1 Power.PulseElectronics.com P769.L (06/20) SMT Power Inductor High Current Molded Power Inductor - PA4342.XXXNLT & PM4342.XXXNLT Series POWER PRODUCTS Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C Commercial6 Inductance5 100KHz, 1V Automotive6 DC Resistance Rated3 Current TYP. MAX. Saturation2 Current uH A mΩ mΩ A PA4342.822NLT PM4342.822NLT 8.2 8.0 20 25.5 12.5 PA4342.103NLT PM4342.103NLT 10 7.5 27 30 12 PA4342.153NLT PM4342.153NLT 15 6.25 40 45 10 PA4342.223NLT PM4342.223NLT 22 5.0 64 74 7.0 PA4342.273NLT PM4342.273NLT 27 4.0 86 100 6.0 PA4342.333NLT PM4342.333NLT 33 3.5 92 112 5.0 PA4342.473NLT PM4342.473NLT 47 3.0 145 167 4.5 PA4342.683NLT PM4342.683NLT 68 2.0 205 240 3.0 Notes: 1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range. 2. The saturation current is the current at which the initial inductance drops approximately 30% at the stated ambient temperature. This current is determined by placing the compnent in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effect) to the component. 3. The rated current is the DC current required to raise the component temperature by approximately 40�C. Take note that the components’ performanc varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 4. The part temperature (ambient+temp rise) should not exceed 125�C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be 5. 6. 7. 8. verified in the end application. Please note that the inductance tolerance of all parts are +/-20% except those indicated with a * which are +/-30%. Parts shown in bold are standard catalog parts and are available through sample stock and distribution. Parts in lighter font are available but are not necessarily held in sample stock or distribution and lead times may be longer. Please contact Pulse for availablity. Both the PA and PM part numbers are AEC-Q200 qualified parts. The PM part numbers have full automotive IATF16949 certification. The PM part number dimensions are 100% tested in production but do not necessarily meet a product capability index (Cpk)> 1.33 and therefore may not strictly conform to PPAP. Special Characteristics Mechanical   PA4342/PM4342 Final Layout Series Mechanical PA4342/PM4342 Footprint 2 All Dimensions in mm. 2 A 11.5 Max A’ 10.3 Max B 10.3 Max SUGGESTED PAD LAYOUT C 4.0 Max Power.PulseElectronics.com D (3.0) E (6.4) F (3.5) J 2.4 Max K 2.6 Max G (4.1) H (5.4) P769.L (06/20) SMT Power Inductor High Current Molded Power Inductor - PA4342.XXXNLT & PM4342.XXXNLT Series POWER PRODUCTS TAPE & REEL INFO Marking Marking K0 A W P1 G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) A G P1 W K0 PA4342/PM4342 Ø330 24 16 24 4.5 QTY PCS/REEL 500 Typical Performance Curves PA4342.XXXNLT and PM4342.XXXNLT PA4342.151NLT PA4342.221NLT PA4342.271NLT PA4342.331NLT PA4342.361NLT PA4342.391NLT PA4342.451NLT PA4342.471NLT PA4342.561NLT 3 Power.PulseElectronics.com P769.L (06/20) SMT Power Inductor High Current Molded Power Inductor - PA4342.XXXNLT & PM4342.XXXNLT Series POWER PRODUCTS PA4342.681NLT PA4342.881NLT PA4342.102NLT PA4342.122NLT PA4342.152NLT PA4342.222NLT PA4342.252NLT PA4342.332NLT PA4342.402NLT PA4342.472NLT PA4342.562NLT PA4342.682NLT PA4342.822NLT PA4342.103NLT PA4342.153NLT 4 Power.PulseElectronics.com P769.L (06/20) SMT Power Inductor High Current Molded Power Inductor - PA4342.XXXNLT & PM4342.XXXNLT Series PA4342.223NLT PA4342.273NLT PA4342.473NLT PA4342.683NLT PA4342.333NLT For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved. 5 Power.PulseElectronics.com P769.L (06/20) POWER PRODUCTS