PA4343.472ANLT

SMT Power Inductors High Current Molded Power Inductor - PA4343.XXXANLT Series IA Height: 6.5mm Max Footprint: 14.0mm x 12.8mm Max Current Rating: up to 53A Inductance Range: 0.22uH to 68uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux T F 169 4 9 Electrical Specifications @ 25°C - Operating Temperature -55°C to +155°C Inductance 100KHz, 1V Rated Current uH±20% PA4343.221ANLT 5,8 Part Number DC Resistance 3 Saturation2 Current SRF K Factor TYP. MAX. TYP. TYP. A mΩ mΩ A MHz 0.22 42 0.4 0.46 105 130 Footprint 1 93.5 PA4343.331ANLT 0.33 36 0.6 0.70 65 80 Footprint 1 106.1 PA4343.471ANLT 0.47 35 0.88 1.02 58 70 Footprint 1 60.4 PA4343.561ANLT 0.56 33.5 1.1 1.3 50 62 Footprint 1 60.4 PA4343.681ANLT 0.68 33 1.25 1.5 46 58 Footprint 1 75.8 PA4343.821ANLT 0.82 31 1.3 1.65 39 56 Footprint 1 68.7 PA4343.102ANLT 1.0 29 1.5 1.8 36 43 Footprint 1 53.5 PA4343.152ANLT 1.5 25 2.2 2.53 30 33 Footprint 1 38.1 PA4343.222ANLT 2.2 21 3.7 4.2 24 25 Footprint 2 32.2 PA4343.242ANLT 2.4 20.5 3.9 4.5 23.5 23 Footprint 2 PA4343.332ANLT 3.3 19 5.3 6.2 22.5 17 Footprint 2 22.6 PA4343.472ANLT 4.7 17 6.8 8.0 21 15 Footprint 2 16.5 PA4343.562ANLT 5.6 15 8.3 9.8 19.5 14 Footprint 2 16.5 PA4343.682ANLT 6.8 14 9.8 11.3 18 12 Footprint 2 12.0 PA4343.822ANLT 8.2 12.5 12 13.8 17 10 Footprint 2 11.0 PA4343.103ANLT 10 11 13 15.8 15 10 Footprint 2 10.1 PA4343.223ANLT 22 8 31 35 9 6 Footprint 2 8.6 PA4343.333ANLT 33 6.5 46 55 8 4 Footprint 2 5.1 PA4343.473ANLT 47 5.7 58 67 6.8 4 Footprint 2 6.2 PA4343.683ANLT 68 4.8 82 100 5.0 3 Footprint 2 4.7 1 PulseElectronics.com Mechanical P793.G (05/22) SMT Power Inductors High Current Molded Power Inductor - PA4343.XXXANLT Series Notes: 1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range. 2. The saturation current is the current at which the initial inductance drops by approximately 30% at the stated ambient temperature. The maximum allowable drop at this stated current is 40% of the initial inductance. This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effect) to the component. 3. The rated current is the DC current required to raise the component temperature by approximately 40°C. Take note that the components’ performanc varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 4. The part temperature (ambient+temp rise) should not exceed maximum operating temperature under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Please note that the inductance tolerance of all parts are ±20%, except those indicated by an * which are +/- 30%. Parts shown in bold are standard catalog parts and are available through sample stock and distribution. Parts in lighter font are available but are not necessarily held in sample stock or distribution and lead times may be longer. Please contact Pulse for availablity. The PM prefix parts are AEC-Q200 qualified and has full automotive IATF16949 certification. The mechanical dimensions are 100% tested in production but do not necessarily meet a product capability index (Cpk) 1.33 and therefore may not strictly conform to PPAP. Special Characteristics 5. 6. 7. 8. Mechanical PA4343.XXXANLT C A D E B Footprint 1 C A D L H E B G Footprint 2 Final Layout SUGGESTED PAD LAYOUT Series Mechanical A B C D E L G H PA4343.XXXANLT Footprint 1 13.5±0.5 12.6±0.2 6.2±0.3 2.3±0.3 4.0±0.3 14.5 8.0 5.0 PA4343.XXXANLT Footprint 2 13.5±0.5 12.6±0.2 6.2±0.3 2.3±0.3 4.7±0.3 14.5 8.0 5.0 All Dimensions in mm. 2 PulseElectronics.com P793.G (05/22)  3DFNDJLQJ ,QIRUPDWLRQ  5HHO 'LPHQVLRQ SMT Power Inductors &29(57$3( ɼ 7\SH $PP %PP &PP 'PP  & % ' ´[PP  f  High Current Molded Power Inductor - PA4343.XXXANLT Series $ (0%266('&$55,(5 TAPE & REEL INFO  7DSH 'LPHQVLRQ %ODQNSRUWLRQV &KLSFDYLW\ %ODQNSRUWLRQV : A  . 3 PPRUPRUH G PPRUPRUH 'LUHFWLRQRIWDSH 6HULHV 6L]H %RPP $RPP .RPP 3PP :PP )PP 703$  “ “ “ “ 'PP “ MOUNTING “ “ SURFACE TYPE, REEL/TAPE LIST “ REEL SIZE (mm)  3DFNDJLQJ 4XDQWLW\ 703$ WPP  &KLS  5HHO  ,QQHU ER[  &DUWRQ  PA4343.XXXANLT TAPE SIZE (mm) QTY A G P1 W K0 PCS/REEL Ø330 24.4 16 24 7.0 500 Typical Performance Curves  7HDULQJ 2II )RUFH ) 7RSFRYHUWDSH 7KH IRUFH IRU WHDULQJ RII FRYHU WDSH LV  WR  JUDPV LQ WKH DUURZ GLUHFWLRQ XQGHU WKH IROORZLQJ FRQGLWLRQVUHIHUHQFHG $16,(,$' RI  VWDQGDUG „; WR„;  %DVHWDSH 5RRP 7HPS ć 5RRP +XPLGLW\  5RRP DWP K3D 7HDULQJ 6SHHG PPPLQ a a a      PulseElectronics.com   3       ༫ 6WRUDJH &RQGLWLRQV 7R PDLQWDLQ WKH VROGHU DELOLW\ RI WHUPLQDO HOHFWURGHV  7$,7(&+ SURGXFWV PHHW ,3&-('(& -67'' VWDQGDUG06/ OHYHO   7HPSHUDWXUH DQG KXPLGLW\ FRQGLWLRQV a ć DQG a 5+  5HFRPPHQGHG SURGXFWV VKRXOG EH XVHG ZLWKLQ  PRQWKV IRUP WKH WLPH RI GHOLYHU\  7KH SDFNDJLQJ PDWHULDO VKRXOG EH NHSW ZKHUH QR FKORULQH RU VXOIXU H[LVWV LQ WKH DLU ༫ 7UDQVSRUWDWLRQ  3URGXFWV VKRXOG EH KDQGOHG ZLWK FDUH WR DYRLG GDPDJH RU FRQWDPLQDWLRQ IURP SHUVSLUDWLRQ DQG VNLQ RLOV  7KH XVH RI WZHH]HUV RU YDFXXP SLFN XS LV VWURQJO\ UHFRPPHQGHG IRU LQGLYLGXDO FRPSRQHQWV  %XON KDQGOLQJ VKRXOG HQVXUH WKDW DEUDVLRQ DQG PHFKDQLFDO VKRFN DUH PLQLPL]HG   $SSOLFDWLRQ 1RWLFH  P793.G (05/22) SMT Power Inductors High Current Molded Power Inductor - PA4343.XXXANLT Series        PulseElectronics.com     4              P793.G (05/22) SMT Power Inductors High Current Molded Power Inductor - PA4343.XXXANLT Series               PulseElectronics.com      5      P793.G (05/22) SMT Power Inductors High Current Molded Power Inductor - PA4343.XXXANLT Series    6 PulseElectronics.com              P793.G (05/22) SMT Power Inductors High Current Molded Power Inductor - PA4343.XXXANLT Series Core Loss Bp-p = K *L(uH) *delta I(A) For More Information: Americas - prodinfo_power_americas@yageo.com | Europe - prodinfo_power_emea@yageo.com | Asia - prodinfo_power_asia@yageo.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2022. Pulse Electronics, Inc. All rights reserved. 7 PulseElectronics.com P793.G (05/22)