PAC6034.105NLT

SMT Common Mode Chokes PAC6006.XXXNLT & PAC6034.XXXNLT Series EP13 Platform Round Wire Coil (6006) and Bobbin (6034) 15.5x13.5x13.5mm & 17.5x13.5x12.45mm 60uH/17A to 3mH/0.92A 1500Vrms Isolation (380Vrms continuous) Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C Part Number Inductance (1-2)=(3-4) Irated Leakage Inductance (1-2) with (3-4) shorted Capacitance (1,2) to (3,4) (uH ±40%) (A) (uH TYP) (pF TYP) (mΩ TYP) Self Resonant Frequency (1-2)=(3-4) Impedance @ SRF (mΩ MAX) (MHz TYP) (kΩ TYP) DCR (1-2)=(3-4) PAC6006.XXXNLT - 15.5 x 13.5 x 13.5mm Max PAC6006.503NLT 58 17 0.8 2.2 2.6 3.0 3.4 0.35 PAC6006.104NLT 130 14 1.3 2.7 3.8 4.2 11 0.61 PAC6006.204NLT 230 12 1.5 3.3 4.8 5.3 7.0 1.0 PAC6006.264NLT 291 11 2.2 2.8 6.0 6.6 5.3 1.4 PAC6006.364NLT 360 10 2.6 2.5 7.8 8.6 5.5 1.6 PAC6006.444NLT 435 8.5 3.6 2.6 10 11 4.8 1.9 PAC6006.604NLT 608 6.7 4.8 2.8 15 16 3.9 2.5 PAC6006.XXXNLT - 15.5 x 13.5 x 13.5mm Max PAC6034.105NLT* 850 2.1 0.6 4.4 78 85 2.6 7.8 PAC6034.205NLT* 1800 1.1 0.85 3.5 260 290 2 16.2 PAC6034.305NLT* 3000 0.95 1 4.3 335 369 1.4 26 NOTE: 1. 2. 3. 4. The current rating (Irated) is based upon the temperature rise of the component and represents the rms current which will cause a typical temperature rise of 50�C with free air cooling. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. Pulse complies to industry standard tape and reel specification EIA481. * Inductance (1 -2)=(3-4) (uH±35%) 1 PulseElectronics.com P901. B (02/22) SMT Common Mode Chokes PAC6006.XXXNLT & PAC6034.XXXNLT Series Mechanicals Schematic PAC6006.XXXNLT 4 3 4 3 1 2 PAC6006.XXXNL 1 SCHEMATIC 2 Weight (TYP) ................... 1.8 grams Tape & Reel ....................... 150/ Reel Dimensions: mm Unless otherwise specified, all tolerance are ±0.25 FINAL OUTLINE Mechanicals Schematic PAC6034.XXXNLT 4X 1.20 13.5 MAX 4X 1.20 3 4 3 13.5 MAX 4 3 4 PAC6034.XXXNL 1 D/C CTRY 13.36 17.5 MAX 18.16 D/C CTRY 13.36 17.5 MAX PART NUMBER 2 SCHEMATIC 2 1 1 2 SUGGESTED LAND PATTERN 10.00 10.00 Weight (TYP) ................... 1.8 grams Tape & Reel ....................... 150/ Reel Dimensions: mm Unless otherwise specified, all tolerance are ±0.25 SUGGESTED LAND PATTE 12.45 MAX 4X .70 4X 0.70 12.45 MAX 10.00 d .005 [.13] 10 SURFACES 2 PulseElectronics.com 10.00 FINAL OUTLINE P901. B (02/22) SMT Common Mode Chokes PAC6006.XXXNLT & PAC6034.XXXNLT Series Impedance Plots PAC6006.XXXNLT PAC6006 Impedance Vs Frequency 3000.0 2500.0 Impedance Ω 2000.0 .503 .104 1500.0 .204 .264 .364 .444 1000.0 .604 500.0 0.0 100 1000 10000 100000 Frequency, KHz PAC6034.XXXNLT Impedance Vs Frequency PAC6034.XXXNLT 30000 25000 20000 |z| (Ohms) 15000 10000 5000 0 1.00E+02 1.00E+03 105NLT Frequency (kHz) 205NLT 1.00E+04 1.00E+05 305NLT For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2021. Pulse Electronics, Inc. All rights reserved. 3 PulseElectronics.com P901. B (02/22)