PE-0402CD130GTT

RF Chip Inductors Wire Wound - 0402 Series For More Information Please Visit: Networking.PulseElectronics.com WIRE WOUND RF CHIP INDUCTORS 0402CD SERIES Wire wound ceramic core construction High Q values High self resonant frequency Temperature Range -40 oC to +125o C Industry 0402 (1005) size and surface mount land pattern 100% Tin Solder Termination Electrical Specifications @ 25°C - Operating Temperature Range -40oC to +125oC Part Number 6 Tolerance +/-5% Part Number 6 Tolerance +/-2% Inductance 1 (nH) Q2 (MIN) SRF 3 (MHz MIN) RDC 4 (Ω MAX) IDC 5 (mA MAX) 13 @ 250MHz >6000 0.045 1360 PE-0402CD1N0JTT N/A 1.0 @ 250MHz PE-0402CD1N2JTT 1.2 @ 250MHz 13 @ 250MHz >6000 0.06 1300 PE-0402CD1N8JTT N/A N/A 1.8 @ 250MHz 16 @ 250MHz >6000 0.07 1040 PE-0402CD2N0JTT N/A 2.0 @ 250MHz 16 @ 250MHz >6000 0.07 1040 PE-0402CD2N2JTT 2.2 @ 250MHz 18 @ 250MHz >6000 0.07 960 PE-0402CD2N7JTT N/A N/A 2.7 @ 250MHz 18 @ 250MHz >6000 0.12 860 PE-0402CD3N3JTT N/A 3.3 @ 250MHz 20 @ 250MHz >6000 0.066 840 PE-0402CD3N6JTT N/A 3.6 @ 250MHz 20 @ 250MHz >6000 0.066 840 PE-0402CD3N9JTT N/A 3.9 @ 250MHz 20 @ 250MHz 5800 0.066 840 PE-0402CD4N7JTT N/A 4.7 @ 250MHz 20 @ 250MHz 4775 0.13 640 PE-0402CD5N1JTT 5.1 @ 250MHz 23 @ 250MHz 5800 0.083 800 PE-0402CD5N6JTT N/A N/A 5.6 @ 250MHz 23 @ 250MHz 5800 0.083 760 PE-0402CD6N2JTT N/A 6.2 @ 250MHz 23 @ 250MHz 5800 0.083 760 PE-0402CD6N8JTT N/A 5800 0.083 680 PE-0402CD7N2JTT PE-0402CD7N5JTT 6.8 @ 250MHz 7.2 @ 250MHz 20 @ 250MHz N/A N/A 25 @ 250MHz 25 @ 250MHz 5800 0.100 5800 0.104 680 680 PE-0402CD8N2JTT N/A 8.2 @ 250MHz 0.104 680 10.0 @ 250MHz 3900 0.195 480 PE-0402CD110JTT PE-0402CD100GTT N/A 25 @ 250MHz 25 @ 250MHz 4400 PE-0402CD100JTT 11.0 @ 250MHz 21 @ 250MHz 3680 0.120 640 PE-0402CD120JTT N/A 12.0 @ 250MHz 21 @ 250MHz 3600 0.120 640 PE-0402CD150JTT 15.0 @ 250MHz 16.0 @ 250MHz 26 @ 250MHz 3280 0.172 560 PE-0402CD160JTT PE-0402CD150GTT N/A 26 @ 250MHz 3100 0.22 560 PE-0402CD180JTT N/A 18.0 @ 250MHz 26 @ 250MHz 3100 0.23 520 PE-0402CD190JTT N/A 19.0 @ 250MHz 26 @ 250MHz PE-0402CD200JTT PE-0402CD220JTT PE-0402CD200GTT PE-0402CD220GTT 20.0 @ 250MHz 22.0 @ 250MHz 26 @ 250MHz 26 @ 250MHz 3040 3000 0.202 0.250 480 480 0.300 400 7.5 @ 250MHz 2800 Pulse Jack (Continued on next page) www.Networking.PulseElectronics.com WC708.B (4/19) Electronics WIRE WOUND RF CHIP INDUCTORS 0402CD SERIES Electrical Specifications @ 25°C - Operating Temperature Range -40oC to +125oC Q2 Inductance1 SRF 3 Part Number 6 (nH) (MIN) (MHz MIN) Tolerance +/-2% N/A 23.0 @ 250MHz 26 @ 250MHz 2720 2700 24.0 @ 250MHz 26 @ 250MHz PE-0402CD240GTT 2480 27.0 @ 250MHz 26 @ 250MHz PE-0402CD270GTT Part Number 6 Tolerance +/-5% PE-0402CD230JTT PE-0402CD240JTT PE-0402CD270JTT PE-0402CD330JTT N/A PE-0402CD360JTT PE-0402CD390JTT PE-0402CD470JTT PE-0402CD560JTT PE-0402CD680JTT PE-0402CD820JTT PE-0402CD101JTT PE-0402CD121JTT 33.0 @ 250MHz 36.0 @ 250MHz 39.0 @ 250MHz 47.0 @ 250MHz 56.0 @ 250MHz 68.0 @ 250MHz 82.0 @ 250MHz 100 @ 250MHz 120 @ 250MHz PE-0402CD360GTT PE-0402CD390GTT N/A N/A N/A N/A N/A N/A Notes: 1. Inductance measured using a HP4286A RF Impedance Analyzer. (Please note that 35 140 30 120 25 100 20 60 10 40 5 20 Frequency (MHz) 1,000 2100 2100 1750 1840 1680 1620 1520 0,55 0.73 0.97 0.97 1.25 2.60 2.70 350 320 100 100 100 100 100 90 80 15 100 400 400 400 400 2320 0.214 0.30 0.298 0.35 0.39 Typical Q vs Frequency Q Factor Inductance (nH) Typical Inductance vs Frequency 10 IDC 5 (mA MAX) 4. RDC measured using a Valhalla Scientific model 4100 ATC Digital Ohmeter. 5. Based on a 15�C maximum temperature rise. 6. Check ordered tolerance band carefully: To order a +/-2% tolerance band the ordering code ends with "GTT" while any+/-5% tolerance band ends with "JTT" . inductance information is not stamped on part, because of the extremely small size). 2. Q measured using a HP4291A RF Impedance Analyzer with a HP16193A Test Fixture. 3. SRF measured using a HP8753C Network Analyzer. 0 RDC 4 (Ω MAX) 2350 26 @ 250MHz 26 @ 250MHz 25 @ 250MHz 20 @ 250MHz 22 @ 250MHz 18 @ 250MHz 16 @ 250MHz 16 @ 250MHz 14 @ 250MHz (continued) 10,000 0 100 10 Frequency (MHz) 10,000 1,000 Mechanical .047 1.19 .024 0.61 .018 0.46 .026 0.66 .026 0.66 Pulse Jack .008 0.20 Dimensions: Inches mm .005/013 Unless otherwise specified, all tolerances are ± .010 0,25 3 Electronics Weight ..................0.002 grams www.Networking.PulseElectronics.com WC708.B (4/19) .014 0.36 WIRE WOUND RF CHIP INDUCTORS 0402FT SERIES Wire wound ferrite core construction High Impedance Values for suppression High self resonant frequency Temperature Range -40 oC to +125 oC Industry standard 0402 (1005) size and surface mount land pattern 100% Tin Solder Termination Electrical Specifications @ 25°C - Operating Temperature Range -40oC to +125oC Inductance (nH) PE-0402FT220KTT 22.0 @ 7.9MHz Typical Impedance 10 @ 100MHz PE-0402FT330KTT 33.0 @ 7.9MHz PE-0402FT390KTT 3 4 5 RDC (Ω MAX) IDC (mA MAX) 2500 0.065 10 @ 100MHz 2300 0.06 1300 1400 39.0 @ 7.9MHz 25 @ 100MHz 2200 0.115 830 PE-0402FT560KTT 56.0 @ 7.9MHz 30 @ 100MHz 1900 0.095 1000 PE-0402FT780KTT 970 900 SRF (MHz MIN) 78.0 @ 7.9MHz 30 @ 100MHz 1600 0.13 PE-0402FT101KTT PE-0402FT181KTT 100 @ 7.9MHz 60 @ 100MHz 1400 0.16 180 @ 7.9MHz 1150 220 @ 7.9MHz 0.28 0.53 560 PE-0402FT221KTT 75 @ 100MHz 90 @ 100MHz PE-0402FT271KTT 270 @ 2.5MHz 330 @ 2.5MHz 100 @ 100MHz 0.55 110 @ 100MHz 860 820 360 350 470 @ 2.5MHz 120 @ 100MHz 650 0.56 0.73 560 @ 2.5MHz 140 @ 100MHz 600 0.92 PE-0402FT331KTT PE-0402FT471KTT PE-0402FT561KTT Notes: 1 Part Number Tolerance +/-10% 1. Inductance measured using a HP4286A RF Impedance Analyzer. (Please note that inductance information is not stamped on part, because of the extremely small size). 2. Q measured using a HP4291A RF Impedance Analyzer with a HP16193A Test Fixture. 3. SRF measured using a HP8753C Network Analyzer. 1150 380 310 200 4. RDC measured using a Valhalla Scientific model 4100 ATC Digital Ohmeter. 5. Based on a 15�C maximum temperature rise. Mechanical .026 0.64 .047 1.19 .025 0.64 .025 0.64 .026 0.66 .008 0.20 Dimensions: .005/013 Unless otherwise specified, all tolerances are ± .010 0,25 Inches mm 5 Weight ..................0.002 grams www.Networking.PulseElectronics.com WC708.B (4/19) .016 0.40 WIRE WOUND RF CHIP INDUCTORS 0402FT SERIES Typical Inductance vs Frequency Typical Q vs Frequency 1000 470nH 14 330nH 12 220nH 200 180nH 110nH 100 78nH 50 78nH 220nH 330nH 180nH 110nH 4 22nH 20 1 8 6 39nH 10 39nH 10 Q Factor Inductance (nH) 500 560nH 10 2 100 0 1000 10 1 100 Tape and Reel Specifications Storage Temperature -40°C to +125°C Series 0402CD 0402FT Tape Dimensions (mm) Reels Dimensions (mm) Parts per Reel A B C D E W P1 P2 P3 H T 3000 178 50 13 14.4 8.4 8 2 4 4 0.60 0.3 Notes: P1, P2 and P3 are same for all chip inductor series. Keeping the same dimensions for guide hole and pocket pitch (P1), pocket pitch (P2), guide hold pitch (P3) and tape width (8mm) for all series, enables the packaging machine to maintain the same settings while changing models. The only difference between the series are the parts per reel which contributes to a different length of tapes/reel per model. Pulse Jack 6 www.Networking.PulseElectronics.com WC708.B (4/19) Electronics WIRE WOUND RF CHIP INDUCTORS perFormanCe testing Electrical Testing Storage and Operating Temperature Range: -40oC to +125oC Thermal: -40oC to +85oC Moisture Resistance 240 Hours at 70oC Operating Life Inductors are subjected to the extremes for 48 hours. Then tested at 25 oC There shall be no deformation or change in appearance Inductance shall not change by more than ±5% Q values shall not change by more than ±10% Inductors are subjected to 30 cycles for 30 minutes at each extreme. Then tested at 25 oC Inductors are subjected to 10 cycles of 24 hours at 90 to 95% relative humidity Then tested at 24 oC Inductors are subjected to 1000 hours at 85 oC with 85% Relative Humidity with the rated current applied There shall be no Damaged, Open or Shorted Windings Mechanical Testing Temperature Range: Inductors are subjected to the following: Use a solder pot at 260 oC, with RMA Flux. Each termination is immersed in 63Sn/37Pb molten solder for 4 to 6 seconds. There shall be no deformation or change in appearance Inductance shall not change by more than ±5% Q values shall not change by more than ±10% Recommended Solder Heat Resistance Profile Physical Specifications Vibration (Random) Samplers are subjected to random vibrations as per NAVMAT P9492 Mechanical Shock Inductors are subjected to one half sine wave pulse (8700 g's for 0.3ms) in each directional axis for a total of 18 shocks Moisture Resistance Reflow Inductors on to test pads using 63Sn/37 Pb solder paste (IR Reflow profile = 200 oC for 30 seconds or peak 235 oC for 20 seconds) 7 www.Networking.PulseElectronics.com There shall be no deformation or change in appearance Inductance shall not change by more than ±5% Q values shall not change by more than ±10% The inductors shall withstand a minimum force of 1000 g's in any direction using a dynamometer force guage Pulse Jack WC708.B (4/19) Electronics