PE-68026T

SURFACE MOUNT 10BASE-T INTERFACE MODULES Fully Integrated for Adapter, Hub, and Motherboard Applications T OUN M E FAC R U S Available in enhanced or standard design versions Low profile surface mount package E2000 series part numbers designed for AMD, DEC, LSI, Motorola, and National transceivers 235°C peak infrared reflow temperature rating Electrical Specifications @25°C⎯ ⎯Operating Temperature 0°C to +70°C Part Number PE-68025* PE-68026* PE-68027* PE-68056 E2001 E2003 E2007 E2009 Insertion Loss to 10 MHz (db MAX) -6.0 -1.0 -6.5 -1.0 -5.5 -6.0 -5.0 -1.0 Attenuation (TX) (db MIN) 30 MHz -35 -30 -35 -30 -30 -30 -30 -30 40 MHz -35 -35 -35 -27 -30 -27 -35 -27 Return Loss 5 to 10 MHz (db MIN) 100 Ω -18 -18 -18 -18 -18 -18 -18 -18 100 MHz -35 -35 -35 -27 -35 -27 -40 -27 Common Mode Rejection (TX) (dB MIN) Crosstalk (db MIN) 98 ±13 Ω -15 -15 -15 -15 15 -15 -15 -15 5-10 MHz -35 -35 -35 -30 -30 -35 -25 -35 5 MHz -60 -60 -60 -40 -35 -40 -35 -40 10 MHz -60 -60 -60 -30 -30 -35 -30 -35 50 MHz -55 -55 -55 -50 -55 -45 -55 -45 Hipot (Vrms MIN) 100 MHz 200MHz -50 -45 -50 -45 -50 -45 -45 ⎯ -50 ⎯ -30 ⎯ -50 ⎯ -45 ⎯ 1500 1500 1500 1500 1500 1500 1500 1500 NOTE: Part numbers indicated with an asterisk (*) are enhanced performance parts. All transmit turns ratios are 1:1, except the E2009 which is 1: 1.414. For the PE-680XX part series, the receive and transmit sides meet IEEE 802.3i 1993 specifications, while transmit side is enhanced for FCC/VDE Class B system emissions requirement. Specifications reflect filter sections. Additional attenuation is due to predistortion resistors. Mechanical PE-680xx, E200X A PE-680XX/E200X DATE CODE COUNTRY OF ORIGIN .540 13,72 16X .090 2,29 .500 12,70 .100 2,54 7X .100 2,54 .700 17,78 .230 MAX 5,84 .100 (=.700) 7X 2,54 (=17,78) 16X .040 1,02 SUGGESTED PAD LAYOUT .385 9,78 0° – 8° 16X .018 0,46 .040 1,02 .004/0,100 16 SURFACES Part Number E200X PE-680XX Dimension A 1.00 / 25,40 .920 / 23,37 Weight . . . . . . . . . . . . . . . . .2.5 grams Tube . . . . . . . . . . . . . . . . . . . . .20/tube Tape & Reel PE-680XX . . . . . . . . . . . . . . . .250/reel E200X . . . . . . . . . . . . . . . . . . .300/reel Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 16X .035 0,89 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 1 E115.C (5/07) SURFACE MOUNT 10BASE-T INTERFACE MODULES Fully Integrated for Adapter, Hub, and Motherboard Applications Resistor Values (Ω) Part Number PE-68025 PE-68026 PE-68027 IC Manufacturer AMD Various National R1 TXD (+) = 61.9 ⎯ TXOD (-) = 274 R2 TXP (+) = 422 ⎯ TXO (+) = 66.5 R3 TXD (-) = 61.9 ⎯ TXO (-) = 66.5 R4 TXP (-) = 422 ⎯ TXOD (+) = 274 R5 1.2k ⎯ 806 R6 RX (+) = 49.9 ⎯ RX (+) = 49.9 R7 RX (-) = 49.9 ⎯ RX (-) = 49.9 Schematic PE-68025, PE-68026, PE-68027 RECEIVE CHANNEL TRANSMIT CHANNEL 1 CHIP SIDE R1 UTP SIDE LOW PASS FILTER R2 CHIP SIDE 1:1 UTP SIDE LOW PASS FILTER 16 8 1:1 9 R3 R5 2 100 W 7 5 3 R4 4 6 LOW PASS FILTER 10 12 11 LOW PASS FILTER 14 100 W NOTE: PE-68026 does not contain resistors. They are an external configuration. Typical Application Circuit PE-68025, PE-68026, PE-68027 ANALOG INTERFACE MODULE TWISTED PAIR TRANSMIT OUTPUTS 1 R1 3 2 R2 R3 5 4 R4 6 7 2 LOCATION OF REISITORS WHEN EX2001 IS USED Transceiver Chip R5 LPF RXI- 1 LPF 16 LPF TD+ RD- RJ-45 CONNECTOR LPF 15 TD- 3 RD+ 6 R6 RXI+ UTP 8 R7 14 13 12 11 10 9 .01µF USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 2 E115.C (5/07) SURFACE MOUNT 10BASE-T INTERFACE MODULES Fully Integrated for Adapter, Hub, and Motherboard Applications Resistor Values (Ω) Part Number E2001 E2003 E2007 IC Manufacturer National AMD Motorola R1 R2 R3 R4 R5 R6 R7 348.0 61.9 39.0 53.6 422.0 ⎯ 53.6 61.9 39 348.0 422.0 ⎯ 806 1,210 ⎯ 49.9 49.9 49.9 49.9 49.9 49.9 Schematic E2001, E2003, E2007 TRANSMIT CHANNEL 1 CHIP SIDE R1 RECEIVE CHANNEL UTP SIDE LOW PASS FILTER R2 CHIP SIDE 1:1 UTP SIDE LOW PASS FILTER 16 8 2 R3 R5 100 W 5 3 R4 4 R6 15 LOW PASS FILTER 6 NOTE 1 1:1 9 100 W 12 R7 11 LOW PASS FILTER 14 NOTE: Common Mode Choke on transmit channel for E2001 and E2003. Typical Application Circuit E2001, E2003, E2007 ANALOG INTERFACE MODULE TWISTED PAIR TRANSMIT OUTPUTS 1 R1 3 4 R3 R4 2 R2 5 6 7 2 1 Transceiver Chip R5 LPF UTP 8 RXI+ RXI- 16 15 RD- RJ-45 CONNECTOR LPF R7 TD+ 3 RD+ LPF 6 LPF TD- R6 14 13 12 11 10 9 .01µF USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 3 E115.C (5/07) SURFACE MOUNT 10BASE-T INTERFACE MODULES Fully Integrated for Adapter, Hub, and Motherboard Applications Schematic E2009, PE-68056 TRANSMIT CHANNEL CHIP SIDE LOW PASS FILTER 1 RECEIVE CHANNEL CHIP SIDE UTP SIDE LOW PASS FILTER 16 8 5 6 LOW PASS FILTER 14 Turns Ratio for Transmit: PE-68056 is 1:1; E2009 is 1:1.414. Application Notes E2009, PE-68056 TXP- ANALOG INTERFACE MODULE TXDTXP+ TXD+ 1 3 5 6 7 UTP 8 2 Transceiver Chip 1 LPF 16 LPF 13 12 11 10 9 100W RXI- TD+ RD- RJ-45 CONNECTOR LPF 14 TD- 3 RD+ 6 LPF 11 NOTE: The PE-68056 is designed for use with most transceivers requiring a turns ratio of 1:1 on transmit. The E2009 is designed for use with DEC and most other transceivers requiring a turns ratio of 1:1.414 on transmit. Typical Applications Circuit RXI+ 9 12 LOW PASS FILTER 3 UTP SIDE NOTE: Resistors NOT included in this module. Each module in this application contains low pass filers, isolation transformers, and common mode chokes. These components provide impedance matching, equipment isolation, and EMI suppression to comply with IEEE 802.3 requirements. The E2001, E2003, E2007, PE-68025, and PE-68027 also provide the necessary data and pre-emphasis resistors recommended by most transceiver manufacturers. User compliance with FCC/CSPR Class B requirements can be achieved by applying rigorous design guidelines to suppress noise mechanisms. Attention to high frequency signal paths, proper PCB grounding techniques, and component placement are critical. Pins 5 and 12, when grounded, provide noise return paths. For PE-68025, PE-68026, and PE-68027, one of these pins (typically pin 12) must be decoupled with a bypass capacitor. The E2001, E2003, E2007, E2009, and PE-68056 do not require the bypass capacitor, and pins 5 and 12 may be connected directly to ground. Recommended module orientation with respect to the RJ-45 connector is illustrated in each application circuit. Output pins 6 through 11 should be routed with short, matched traces to the connector for optimum EMI performance. Surface mount devices manufactured by Pulse are designed to meet all published specifications after exposure to surface mount soldering temperatures. The products in this data sheet are transfer molded in IC-style packaging, making them robust enough to withstand convection and infrared reflow solder temperatures up to 235°C. In addition, compliant leads provide excellent solder-joint reliability with a coplanarity of ±.002” (0,05mm). For Tape and Reel orders, please add the suffix "T" to the end of the part number (i.e.PE-68025T). For More Information: Pulse Worldwide Headquarters Pulse European Headquarters Pulse China Headquarters 12220 World Trade Dr. San Diego, CA 92128 U.S.A. www.pulseeng.com Einsteinstrasse 1 71083 Herrenberg Germany TEL: 858 674 8100 FAX: 858 674 8262 TEL: 49 7032 7806 0 FAX: 49 7032 7806 12 B402 Shenzhen Tech Innovation Internat’l 10th Kejinan Rd. High-Tech Industrial Park Nanshan District, Shenzhen China TEL: 86 755 33966678 FAX: 86 755 33966700 Pulse North China Pulse South Asia Pulse North Asia Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 No. 26 Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan, R. O. C. TEL: 86 21 54643211/2 FAX: 86 21 54643210 TEL: 65 6287 8998 FAX: 65 6280 0080 TEL: 886 3 4641811 FAX: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2007. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com 4 E115.C (5/07)