PG0200.601NL

THT POWER INDUCTORS Power Cube Inductors - PG0200NL Series Height: 9.2mm Max Footprint: 16.0mm x 13.2mm Max Current Rating: up to 60Apk Inductance Range: 0.21µH to1.60µH Electrical Specifications @ 25°C — Operating Temperature -40°C to +125°C 1 2 Part Number Inductance @Irated (μH TYP) TYP PG0200.221NL 0.21 45 0.45 PG0200.351NL PG0200.451NL PG0200.601NL PG0200.801NL PG0200.102NL PG0200.132NL PG0200.152NL PG0200.182NL 0.32 0.43 0.57 0.76 0.88 1.23 1.42 1.60 45 29 29 23 23 19 19 19 0.45 1.10 1.10 2.10 2.10 2.55 2.55 2.55 8 Irated 3 (A) MAX Inductance @0A DC (μH ±15%) Saturation 4 Current I SAT (A) Heating 5 Current I DC (A) 0.60 0.22 60+ 45 Core Loss 6 Factor (K1) (K2) 5.12E-09 12.83 0.60 1.45 1.45 2.40 2.40 3.00 3.00 3.00 0.35 0.45 0.60 0.80 1.0 1.3 1.5 1.8 55 50 45 44 35 34 25 20 45 29 29 23 23 19 19 19 5.12E-09 5.12E-09 5.12E-09 5.12E-09 5.12E-09 5.12E-09 5.12E-09 5.12E-09 DCR (mΩ) 20.41 18.74 24.99 25.92 32.39 34.46 39.76 47.71 Schematic Mechanical Y MAX .520 MAX 13,20 .520 13,20 MAX PG0200.XXX Date Code Country of Origin X (in./mm) Y (in./mm) Z (in./mm) .492/12,50 .492/12,50 .500/12,70 .500/12,70 .394/10,00 .394/10,00 .433/11,00 .433/11,00 .433/11,00 .630/16,00 .630/16,00 .618/15,70 .618/15,70 .512/13,00 .512/13,00 .551/14,00 .551/14,00 .551/14,00 .087/2,20 .087/2,20 .063/1,60 .063/1,60 .051/1,30 .051/1,30 .051/1,30 .051/1,30 .051/1,30 Part No. PG0200.221 PG0200.351 PG0200.451 PG0200.601 PG0200.801 PG0200.102 PG0200.132 PG0200.152 PG0200.182 2 Weight . . . . . . . . . . .7.2 grams Tray . . . . . . . . . . . . . .130/tray .362 9,20 MAX .126 ± .020 3,20 ± 0,50 TINNED 1 Ø Z REF. Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 X ± .040 1,00 SUGGESTED PAD LAYOUT USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 85 SPM2007 (11/07) THT POWER INDUCTORS Power Cube Inductors - PG0200NL Series Notes from Tables 1. The temperature of the component (ambient plus temperature rise) must be within the specified operating temperature range. 2. Inductance at Irated is a typical inductance value for the component taken at rated current. 3. The rated current listed is the lower of the saturation current @ 25°C or the heating current. 4. The saturation current, Isat, is the current at which the component inductance drops by 15% (typical) at an ambient temperature of 25°C. This current is determined by placing the component in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effects) to the component. component be tested at the system level, to verify the temperature rise of the component during system operation. 6. Core loss approximation is based on published core data: Core Loss = K1 * (f)1.26 * (K2ΔI)2.11 Where: Core Loss = in Watts f = switching frequency in kHz K1 & K2 = core loss factors ΔI = delta I across the component in Ampere ΔI = one half of the peak to peak flux density K2Δ across the component in Gauss 5. The heating current, IDC, is the DC current required to raise the component temperature by approximately 40°C. The heating current is determined by mounting the component on a typical PCB and applying current for 30 minutes. The temperature is measured by placing the thermocouple on top of the unit under test. Take note that the component’s performance varies depending on the system condition. It is suggested that the 7. Unless otherwise specified, all testing is made at 100kHz, 0.1VAC. 8. The "NL" suffix indicates an RoHS-compliant part number. NonNL suffixed parts are not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions. If a part number does not have the "NL" suffix, but an RoHS compliant version is required, please contact Pulse for availability. Typical Inductance vs DC Bias Current Characteristics 2.3 1.8 PG0200.182 PG0200.152 1.5 1.3 1.0 0.8 PG0200.132 PG0200.102 PG0200.801 PG0200.601 PG0200.451 PG0200.351 PG0200.221 0.3 0.5 0.0 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0 42.5 45.0 47.5 50.0 52.5 55.0 57.5 60.0 62.5 65.0 67.5 70.0 72.5 INDUCTANCE(uH) 2.0 BIAS CURRENT (ADC) USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 755 33966678 • Taiwan 886 3 4641811 www.pulseeng.com 86 SPM2007 (11/07)