PM2202.152NLT

SMT Power Inductors High Current Composite Inductor - PA5002.XXXNLT and PM2202.XXXNLT POWER PRODUCTS IA Height: 2.0mm Max Footprint: 5.7mm x 5.5mm Max Current Rating: up to 30Apk Inductance Range: 0.15uH to 1.5uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise Available in Commercial (PA5002) and Automotive (PM2202) grades T F 169 4 9 Electrical Specifications @ 25°C, Operating Temperature Range -55°C to +155°C Part Number DC Resistance Inductance 100KHz, 0.1V Rated3 Current TYP. MAX. Saturation2 Current uH±20% A mΩ mΩ A K Factor for Core Loss Commerical Automotive6 PA5002.151NLT PM2202.151NLT 0.15 18.8 4 4.6 27 458.5 PA5002.161NLT PM2202.161NLT 0.16 18.8 4 4.6 27 - PA5002.331NLT PM2202.331NLT 0.33 14.4 6.1 7 24 291.7 PA5002.471NLT PA5002.561NLT PA5002.681NLT PA5002.801NLT PA5002.821NLT PA5002.102NLT PA5002.122NLT PA5002.152NLT PM2202.471NLT PM2202.561NLT PM2202.681NLT PM2202.801NLT PM2202.821NLT PM2202.102NLT PM2202.122NLT PM2202.152NLT 0.47 0.56 0.68 0.8 0.82 1 1.2 1.5 14.1 13.9 13.4 13 12 10.5 9.4 8.8 7 8.7 8.9 10.3 11 12 14.2 16.2 8.05 9.54 10.2 11.8 12.7 13.8 16.3 18.7 20 16 14 13.5 13 12.8 12.2 11.7 213.9 213.9 168.9 168.9 168.9 139.5 118.9 118.9 Notes: 1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range. 2. The saturation current is the current at which the initial inductance is guaranteed to drop by no more than 40%. The typical inductance at a specified current can be found on the typical performance curves. 3. The rated current is the DC current required to raise the component temperature by approximately 40�C. Take note that the components’ performanc varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 4. The part temperature (ambient+temp rise) should not exceed 155�C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and 1 Power.PulseElectronics.com 5. 6. 7. other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Parts shown in bold are standard catalog parts and are available through sample stock and distribution. Parts in lighter font are available but are not necessarily held in sample stock or distribution and lead times may be longer. Please contact Pulse for availablity. The PM2202.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The mechanical dimensions are 100% tested in production but do not necessarily meet a product capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP. Special Characteristics P807. E (07/20) 63(&,),&$7,21)25$33529$/ &XVWRPHU  Პᙍ SMT63(&,),&$7,21)25$33529$/ Power Inductors &XVWRPHU31  3$;;;1/7 +XDFKHQ31  +&81$6(5,(6% 'DWH   5HY1R  $ High Current Composite Inductor - PA5002.XXXNLT and PM2202.XXXNLT &XVWRPHU  Პᙍ &XVWRPHU31  3$;;;1/7 +XDFKHQ31  +&81$6(5,(6% 0(&+$1,&$/ ',0(16,216    $ POWER PRODUCTS Mechanical 0(&+$1,&$/ ',0(16,216 PA5002.XXXNLT and PM2202.XXXNLT 'DWH 5HY1R yyyE> zztt yyy D/C FINAL LAYOUT Series A $ B All Dimensions in mm.6HULHV 5.3±0.2 $ D “ 4.3±0.3 ' Chip cavity %6HULHVQXPEHUSDUWVL]H 1.1±0.2 ) “ “ 2.3±0.25 UHI UHI H UHI 4.5 (REF) / / G UHI + * + * L 2.0 (REF) UHI 4.7 (REF) (,QGXFWDQFH7ROHUDQFH0“7“ )7DLOFRGH A +&81;;;;;;;;;; &&RGH $%&'() $3URGXFW6HULHV ',QGXFWDQFH %6HULHVQXPEHUSDUWVL]H (,QGXFWDQFH7ROHUDQFH0“7“ &&RGH )7DLOFRGH P1 SUGGESTED PAD LAYOUT Blank portions ',QGXFWDQFH 352'8&7,'(17,),&$7,21 $3URGXFW6HULHV W “ “ “ “ “ “ UHI +&81;;;;;;;;;; $%&'() Blank portions ) F “ +&81$6(5,(6% TAPE & REEL INFO K0 “ ( 352'8&7,'(17,),&$7,21 ( E “ 1.8±0.2 & % ' & % C +&81$6(5,(6% 5.5±0.2 PA5002/PM2202 6HULHV 200mm or more 400mm or more G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) PA5002/PM2202 TAPE SIZE (mm) QTY A G P1 W K0 PCS/REEL Ø330 12.4 8 12 2.3 3000 Typical Performance Curves 0.2 56 0.2 56 0.15 42 0.15 42 0.1 28 0.1 28 0.05 14 0.05 14 0 0 7 2 14 21 DC CURRENT(A) 28 0 35 Power.PulseElectronics.com INDUCTANCE (uH) 0.25 TEMP. RISE(oC) INDUCTANCE (uH) PA5002.161NLT 70 0 0 7 14 21 DC CURRENT(A) 70 28 TEMP. RISE(oC) PA5002.151NLT 0.25 0 35 P807. E (07/20) SMT Power Inductors High Current Composite Inductor - PA5002.XXXNLT and PM2202.XXXNLT POWER PRODUCTS 0.64 64 0.33 48 0.48 48 0.22 32 0.32 32 0.11 16 0.16 16 6 18 DC CURRENT(A) 24 0 0 30 PA5002.561NLT 0 5 10 15 DC CURRENT(A) 20 PA5002.681NLT 0 25 0.72 56 0.88 48 0.54 42 0.66 36 0.36 28 0.44 24 0.18 14 0.22 12 0 4.4 8.8 13.2 DC CURRENT(A) 17.6 0 PA5002.801NLT 0 0 3.6 7.2 10.8 DC CURRENT(A) 14.4 PA5002.821NLT 18 60 1.3 1.04 48 1.04 48 0.78 36 0.78 36 0.52 24 0.52 24 0.26 12 0.26 12 0 0 0 3.4 3 6.8 10.2 DC CURRENT(A) 13.6 17 Power.PulseElectronics.com INDUCTANCE (uH) 1.3 60 0 22 TEMP. RISE(oC) INDUCTANCE (uH) 0 INDUCTANCE (uH) 1.1 TEMP. RISE(oC) 70 0.9 INDUCTANCE (uH) 12 0 TEMP. RISE(oC) 0 80 TEMP. RISE(oC) 64 INDUCTANCE (uH) 0.44 TEMP. RISE(oC) 0.8 0 INDUCTANCE (uH) PA5002.471NLT 80 0 3.4 6.8 10.2 DC CURRENT(A) 60 13.6 TEMP. RISE(oC) PA5002.331NLT 0.55 0 17 P807. E (07/20) SMT Power Inductors High Current Composite Inductor - PA5002.XXXNLT and PM2202.XXXNLT POWER PRODUCTS 1.6 48 1.02 36 1.2 36 0.68 24 0.8 24 0.34 12 0.4 12 0 3.2 6.4 9.6 DC CURRENT(A) 12.8 PA5002.152NLT 2.5 1.5 36 1 24 0.5 12 3 4 6 9 DC CURRENT(A) 0 3.2 6.4 9.6 DC CURRENT(A) 12.8 0 16 60 48 0 0 0 16 2 0 INDUCTANCE (uH) 48 TEMP. RISE(oC) 1.36 60 12 Power.PulseElectronics.com TEMP. RISE(oC) INDUCTANCE (uH) 2 0 INDUCTANCE (uH) PA5002.122NLT 60 TEMP. RISE(oC) PA5002.102NLT 1.7 0 15 P807. E (07/20) SMT Power Inductors High Current Composite Inductor - PA5002.XXXNLT and PM2202.XXXNLT CORE LOSS vs FLUX DENSITY 2.0 200KHz 1.8 400KHz 600KHz 1.6 800KHz Core Loss (W) 1.4 1000KHz 1400KHz 1.2 1800KHz 1.0 0.8 0.6 0.4 0.2 0.0 0 500 1,000 1,500 2,000 2,500 Bp-p (Gauss) Bp-p = K *L(uH) *delta I(A) For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved. 5 Power.PulseElectronics.com P807. E (07/20) POWER PRODUCTS