PM4341.122NLT

SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT Height: 3.0mm Max Footprint: 7.6mm x 6.9mm Max Current Rating: up to 32.5A Inductance Range: 0.1uH to 47.0uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux 200Vdc Isolation between terminal and core Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C Commercial6,7 Automotive6,7 DC Resistance Rated3 Current TYP. MAX. Saturation2 Current (uH ±20%) A mΩ mΩ A Inductance5 100KHz, 1V PA4341.101NLT PM4341.101NLT 0.10* 32.5 1.2 1.7 60 PA4341.131NLT PM4341.131NLT 0.13* 27.6 1.3 1.8 50 PA4341.151NLT PM4341.151NLT .15* 27 1.5 1.9 45 PA4341.161NLT PM4341.161NLT .16* 27 1.5 1.9 45 PA4341.181NLT PM4341.181NLT .18* 25 1.7 2.3 43 PA4341.191NLT PM4341.191NLT .19* 24 1.8 2.5 41 PA4341.201NLT PM4341.201NLT .20* 24 1.8 2.5 41 PA4341.221NLT PM4341.221NLT .22* 23 2.1 2.8 40 PA4341.241NLT PM4341.241NLT .24 22 2.5 3.1 39 PA4341.251NLT PM4341.251NLT .25 21 3.3 3.5 39 PA4341.301NLT PM4341.301NLT 0.30 21 3.2 3.8 35 PA4341.331NLT PM4341.331NLT 0.33 20 3.5 3.9 32 PA4341.361NLT PM4341.361NLT 0.36 19 3.6 4.2 32 PA4341.471NLT PM4341.471NLT 0.47 17.5 4.0 4.2 26 PA4341.561NLT PM4341.561NLT 0.56 16.5 4.7 5.0 25.5 PA4341.601NLT PM4341.601NLT 0.60 16 4.7 5.2 25.5 PA4341.681NLT PM4341.681NLT 0.68 15.5 4.8 5.5 25 PA4341.751NLT PM4341.751NLT 0.75 14.5 5.5 6.6 24.5 PA4341.821NLT PM4341.821NLT 0.82 13 6.7 8.0 24 PA4341.901NLT PM4341.901NLT .90 11 8.3 10 22 PA4341.102NLT PM4341.102NLT 1.0 11 8.3 10 22 PA4341.122NLT PM4341.122NLT 1.2 10 10 12 20 PA4341.152NLT PM4341.152NLT 1.5 9.0 13 15 18 1 Power.PulseElectronics.com P768.O (08/20) SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C Commercial Automotive 6,7 6,7 DC Resistance Rated3 Current TYP. MAX. Saturation2 Current (uH ±20%) A mΩ mΩ A Inductance5 100KHz, 1V PA4341.182NLT PM4341.182NLT 1.8 8.5 14 17 16 PA4341.202NLT PM4341.202NLT 2.0 8.2 16 19 15 PA4341.222NLT PM4341.222NLT 2.2 8.0 18 20 14 PA4341.252NLT PM4341.252NLT 2.5 7.0 20 22 13 PA4341.272NLT PM4341.272NLT 2.7 7.0 24 27 13 PA4341.332NLT PM4341.332NLT 3.3 6.0 28 30 13.5 PA4341.472NLT PM4341.472NLT 4.7 5.5 37 40 10 PA4341.562NLT PM4341.562NLT 5.6 5.0 43 48 9.0 PA4341.682NLT PM4341.682NLT 6.8 4.5 54 60 8.0 PA4341.822NLT PM4341.822NLT 8.2 4.0 64 68 7.5 PA4341.103NLT PM4341.103NLT 10 3.5 75 85 6.0 PA4341.123NLT PM4341.123NLT 12 3.3 81 93 5.5 PA4341.153NLT PM4341.153NLT 15 3.0 107 123 4.0 PA4341.223NLT PM4341.223NLT 22 2.0 165 190 3.5 PA4341.333NLT PM4341.333NLT 33 2.0 200 240 2.5 PA4341.403NLT PM4341.403NLT 40 1.9 283 340 2.3 PA4341.473NLT PM4341.473NLT 47 1.75 302 363 2.0 Notes: 1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range. 2. The saturation current is the current at which the initial inductance drops approximately 30% at the stated ambient temperature. This current is determined by placing the compnent in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effect) to the component. 3. The rated current is the DC current required to raise the component temperature by approximately 40�C. Take note that the components’ performanc varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. 4. The part temperature (ambient+temp rise) should not exceed 125�C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 2 Power.PulseElectronics.com 5. 6. 7. 8. Please note that the inductance tolerance of all parts are +/-20% except those indicated with a * which are +/-30%. Parts shown in bold are standard catalog parts and are available through sample stock and distribution. Parts in lighter font are available but are not necessarily held in sample stock or distribution and lead times may be longer. Please contact Pulse for availablity. Both the PA and PM part numbers are AEC-Q200 qualified parts. The PM part numbers have full automotive IATF16949 certification. The PM part number dimensions are 100% tested in production but do not necessarily meet a product capability index (Cpk)> 1.33 and therefore may not strictly conform to PPAP. Special Characteristics P768.O (08/20) SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT Mechanical PA4341.XXXNLT and PM4341.XXXNLT XXXNL D/C Series A B C D E F G H K PA4341/PM4341 7.6 MAX 6.9 MAX 3.0 MAX (3.0) (3.7) (3.5) (2.95) (2.5) (0~0.22) All Dimensions in mm. TAPE & REEL INFO Marking Marking K0 A W P1 G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) PA4341/PM4341 3 TAPE SIZE (mm) QTY A G P1 W K0 PCS/REEL Ø330 16 12 16 3.3 1000 Power.PulseElectronics.com P768.O (08/20) SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT Typical Performance Curves PA4341.XXXNLT and PM4341.XXXNLT PA4341.101NLT PA4341.131NLT PA4341.151NLT PA4341.161NLT PA4341.181NLT PA4341.191NLT PA4341.201NLT PA4341.221NLT PA4341.241NLT PA4341.251NLT PA4341.301NLT PA4341.331NLT PA4341.361NLT PA4341.471NLT PA4341.561NLT 4 Power.PulseElectronics.com P768.O (08/20) SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT PA4341.601NLT PA4341.681NLT PA4341.751NLT PA4341.821NLT PA4341.901NLT PA4341.102NLT PA4341.122NLT PA4341.152NLT PA4341.182NLT PA4341.202NLT PA4341.222NLT PA4341.252NLT PA4341.272NLT PA4341.332NLT PA4341.472NLT 5 Power.PulseElectronics.com P768.O (08/20) SMT Power Inductor High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT PA4341.562NLT PA4341.682NLT PA4341.822NLT PA4341.103NLT PA4341.681NLT PA4341.123NLT PA4341.153NLT PA4341.223NLT PA4341.333NLT PA4341.403NLT PA4341.473NLT For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved. 6 Power.PulseElectronics.com P768.0 (08/20)