PM4346.562NLT

SMT Power Inductor High Current Molded Power Inductor - PA4346 & PM4346 Series POWER PRODUCTS Height: 5mm Max Footprint: 14mm x 12.8mm Max Current Rating: up to 24A Inductance Range: 1uH to 47uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise 200 Vdc Isolation Between Terminal and Core Available in Commercial (PA) and Automotive (PM) grades Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C Automotive6,7 Commercial6,7 Inductance5 100KHz, 1.0V DC Resistance Rated3 Current Saturation2 Current uH±20% TYP. A TYP. mΩ MAX. mΩ TYP. A PA4346.101NLT PA4346.101NLT 0.10 55 .35 .45 120 PA4346.201NLT PM4346.201NLT 0.2 52 0.45 0.55 110 PA4346.221NLT PM4346.221NLT 0.22 52 0.5 0.7 110 PA4346.331NLT PM4346.331NLT 0.33 42 0.7 0.9 80 PA4346.361NLT PM4346.361NLT 0.36 42 0.75 0.95 75 PA4346.391NLT PM4346.391NLT 0.39 42 0.78 0.95 70 PA4346.471NLT PM4346.471NLT 0.47 38 0.86 1.1 65 PA4346.501NLT PM4346.501NLT 0.5 37 0.9 1.3 60 PA4346.561NLT PM4346.561NLT 0.56 36 1 1.5 55 PA4346.681NLT PM4346.681NLT 0.68 34 1.4 1.7 54 PA4346.821NLT PM4346.821NLT 0.82 31 1.7 2.1 52 PA4346.103NLT PA4346.103NLT 10.0 9.0 21.4 25.5 16 PA4346.183NLT PA4346.183NLT 18.0 7.5 40 45 11 PA4346.102NLT PM4346.102NLT 1 29 1.85 2.5 50 PA4346.122NLT PM4346.122NLT 1.2 28 2.5 3 49 PA4346.152NLT PM4346.152NLT 1.5 27 2.8 3.3 48 PA4346.182NLT PM4346.182NLT 1.8 21 4 4.9 40 PA4346.222NLT PM4346.222NLT 2.2 20 4.2 5.5 32 PA4346.332NLT PM4346.332NLT 3.3 15 6.8 9.2 32 PA4346.472NLT PM4346.472NLT 4.7 12 11.4 15 27 PA4346.562NLT PM4346.562NLT 5.6 11.5 12.3 16.5 22 PA4346.602NLT PM4346.602NLT 6 11.5 13 16.5 21.5 1 Power.PulseElectronics.com P873.A (07/20) SMT Power Inductor High Current Molded Power Inductor - PA4346 & PM4346 Series POWER PRODUCTS Commercial6,7 Inductance5 100KHz, 1.0V Automotive6,7 Rated Current DC Resistance Saturation Current TYP. TYP. MAX. TYP. uH±20% A mΩ mΩ A PA4346.682NLT PM4346.682NLT 6.8 11 14.5 18.5 21 PA4346.822NLT PM4346.822NLT 8.2 9.5 16.8 22.5 18 PA4346.223NLT PM4346.223NLT 22 6.5 50 58 10 PA4346.333NLT PM4346.333NLT 33 5 73 88 8 Notes: 1. 2. 3. 4. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range. The saturation current is the current at which the initial inductance drops approximately 30% at the stated ambient temperature. This current is determined by placing the compnent in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effect) to the component. The rated current is the DC current required to raise the component temperature by approximately 40�C. Take note that the components’ performance varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. The part temperature (ambient+temp rise) should not exceed 125�C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be 5. 6. 7. 8. verified in the end application. Please note that the inductance tolerance of all parts are ±20%, except those indicated by an * which are +/- 30%. Parts shown in bold are standard catalog parts and are available through sample stock and distribution. Parts in lighter font are available but are not necessarily held in sample stock or distribution and lead times may be longer. Please contact Pulse for availablity. The PM prefix parts are AEC-Q200 qualified and has full automotive IATF16949 certification. The mechanical dimensions are 100% tested in production but do not necessarily meet a product capability index (Cpk) 1.33 and therefore may not strictly conform to PPAP. Special characteristics Mechanical PA4346/PM4346 C A H E B XXXNL 　 D/C L D G SUGGESTED PAD LAYOUT FINAL LAYOUT Series A B C D E L G H PA4346/PM4346 13.5+/-0.5 12.5+/-0.3 4.8+/-0.2 2.3+/-0.3 4.7+/-0.3 14.2 8 5 All Dimensions in mm. 2 Power.PulseElectronics.com P873.A (07/20) SMT Power Inductor High Current Molded Power Inductor - PA4346 & PM4346 Series POWER PRODUCTS TAPE & REEL INFO Marking Marking K0 A W P1 G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) TAPE SIZE (mm) A G P1 W K0 PA4346/PM4346 3 Ø330 Power.PulseElectronics.com 24.4 16 24 4 QTY PCS/REEL 500 P873.A (07/20) SMT Power Inductor High Current Molded Power Inductor - PA4346 & PM4346 Series POWER PRODUCTS Typical Performance Curves PA/PM4346.XXXNLT 4 PA4346.101NLT PA4346.221NLT PA4346.331NLT PA4346.471NLT PA4346.561NLT PA4346.681NLT PA4346.821NLT PA4346.102NLT PA4346.152NLT PA4346.182NLT PA4346.222NLT PA4346.332NLT PA4346.472NLT PA4346.562NLT PA4346.602NLT PA4346.682NLT PA4346.822NLT PA4346.103NLT Power.PulseElectronics.com P873.A (07/20) PA4346.472NLT PA4346.562NLT PA4346.602NLT SMT Power Inductor High Current Molded Power Inductor - PA4346 & PM4346 Series PA4346.682NLT PA4346.183NLT PA4346.822NLT PA4346.103NLT PA4346.223NLT PA4346.333NLT For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved. 5 Power.PulseElectronics.com P873.A (07/20) POWER PRODUCTS