PM4548.681NLT

SMT Power Inductors High Current Molded Power Inductor - PA4548.XXXNLT Series POWER PRODUCTS IA Height: 2.4mm Max Footprint: 7.3mm x 6.9mm Max Current Rating: up to 30A Inductance Range: 0.10uH to 22.0uH High current, low DCR, and high efficiency High reliability Minimized acoustic noise and minimized leakage flux noise 200 Vdc Isolation Between Terminal and Core T F 169 4 9 Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C Commercial6,7 Automotive6,7 Inductance5 100KHz, 1.0V Rated3 Current DC Resistance Saturation2 Current TYP. TYP. MAX. TYP. uH±20% A mΩ mΩ A PA4548.101NLT PM4548.101NLT 0.10* 30 1.4 1.7 70 PA4548.151NLT PM4548.151NLT 0.15* 30 1.8 2.3 45 PA4548.201NLT PA4548.201NLT 0.20 23 1.9 2.8 40 PA4548.221NLT PM4548.221NLT 0.22 21 2 3.2 34 PA4548.331NLT PM4548.331NLT 0.33 18 3.6 4.4 30 PA4548.361NLT PA4548.361NLT 0.36 17 3.8 4.6 29 PA4548.471NLT PM4548.471NLT 0.47 15 4.8 5.1 26 PA4548.561NLT PM4548.561NLT 0.56 13 5.5 6.5 24 PA4548.601NLT PA4548.601NLT 0.60 13 5.7 6.9 22 PA4548.681NLT PM4548.681NLT 0.68 13 6.4 7.2 21 PA4548.821NLT PM4548.821NLT 0.82 11 8 9.5 17 PA4548.102NLT PM4548.102NLT 1.0 11 10.5 13.5 16 PA4548.152NLT PM4548.152NLT 1.5 9 17 20 15 PA4548.222NLT PM4548.222NLT 2.2 7 23 28 14 PA4548.332NLT PM4548.332NLT 3.3 6 34 39 10 PA4548.472NLT PM4548.472NLT 4.7 5.5 41 50 9 PA4548.562NLT PM4548.562NLT 5.6 5 56 62 8 PA4548.682NLT PM4548.682NLT 6.8 4 65 72 7 PA4548.822NLT PM4548.822NLT 8.2 3.6 81 95 6 PA4548.103NLT PM4548.103NLT 10 3.2 92 101 5 PA4548.153NLT PM4548.153NLT 15 2.5 150 180 3.5 PA4548.223NLT PM4548.223NLT 22 1.8 185 215 3 1 Power.PulseElectronics.com P825.I (07/20) SMT Power Inductors High Current Molded Power Inductor - PA4548.XXXNLT Series POWER PRODUCTS Notes: 4. 6. 7. 8. Mechanical PA4548/PM4548 C A D XXXNL 　 D/C L H 3. verified in the end application. Please note that the inductance tolerance of all parts are +/-20% except those indicated with a * which are +/-30%. Parts shown in bold are standard catalog parts and are available through sample stock and distribution. Parts in lighter font are available but are not necessarily held in sample stock or distribution and lead times may be longer. Please contact Pulse for availablity. The PA4548.XXXNLT and PM4548.XXXNLT are both AEC-Q200 qualified. The PM4548. XXXNLT part numbers are also IATF16949 certified. The mechanical dimensions are 100% tested in production but do not necessarily meet a product capability index (Cpk) 1.33 and therefore the PM4548.XXXNLT may not strictly conform to PPAP. Special Characteristics 5. E 2. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the standard operating range. The saturation current is the current at which the initial inductance drops approximately 30% at the stated ambient temperature. This current is determined by placing the compnent in the specified ambient environment and applying a short duration pulse current (to eliminate self-heating effect) to the component. The rated current is the DC current required to raise the component temperature by approximately 40�C. Take note that the components’ performance varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. The part temperature (ambient+temp rise) should not exceed 125�C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be B 1. G SUGGESTED PAD LAYOUT FINAL LAYOUT Series A B C D E L G H PA4548/PM4548 7.0±0.3 6.6±0.3 2.2±0.2 1.8±0.3 3.0±0.3 7.7 2.5 3.5 TAPE & REEL INFO Marking Marking K0 A W P1 G Direction of tape SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) A 2 G Power.PulseElectronics.com TAPE SIZE (mm) P1 W QTY K0 PCS/REEL P825.I (07/20) SMT Power Inductors High Current Molded Power Inductor - PA4548.XXXNLT Series POWER PRODUCTS Typical Performance Curves PA4548.XXXNLT 3 PA4548.101NLT PA4548.151NLT PA4548.201NLT PA4548.221NLT PA4548.331NLT PA4548.361NLT PA4548.471NLT PA4548.561NLT PA4548.601NLT PA4548.681NLT PA4548.821NLT PA4548.102NLT PA4548.152NLT PA4548.222NLT PA4548.332NLT PA4548.472NLT PA4548.562NLT PA4548.682NLT Power.PulseElectronics.com P825.I (07/20) PA4548.152NLT PA4548.222NLT PA4548.332NLT SMT Power Inductors High Current Molded Power Inductor - PA4548.XXXNLT Series PA4548.472NLT PA4548.562NLT PA4548.682NLT PA4548.822NLT PA4548.103NLT PA4548.153NLT PA4548.223NLT For More Information: Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved. 4 Power.PulseElectronics.com P825.I (07/20) POWER PRODUCTS