R0003NL

Surface Mount Slic Package Common Mode Chokes Suited for LAN and Telecom WAN Applications Pulse Patented SLIC SMD LPC package Reduces radiated EMI emissions Filters common mode noise for EMI reduction Common mode attenuation from 100 KHz to 1 GHz RoHS peak reflow solder temperature 245°C Electrical Specifications @ 25°C Common Mode Attenuation (dB TYP) Part Number 1 No. of Lines Primary Inductance OCL (µH MIN) PE-68624NL 2 47 11 27 40 44 42 36 26 17 B4003NL 2 4700 46 41 48 38 33 21 22 R0003NL 3 20 6 14 27 27 30 30 PE-65627NL 4 24 8 21 32 36 37 PE-65854NL 4 47 3 19 32 36 35 DCR (Ω MAX) Primary Appication — 0.40 WAN 23 17 1.00 VDSL 30 28 25 0.40 LAN 36 30 20 — 0.25 WAN 29 12 6 — 0.40 WAN 100 KHz 1 MHz 10 MHz 30 MHz 50 MHz 100 MHz 300 MHz 500 MHz 1 GHz 1. For Tape & Reel packaging, add suffix “T” to the end of the part number e.g. R0003NLT 2. MSL = Moisture Sensitivity Level =1 MECHANICALS SCHEMATICS PE-68624NL, R0003NL Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 PE-68624NL or R0003NL Weight . . . . . . . . . . . . . .0.17 grams Tape & Reel . . . . . . . . . . .1500/reel Tube . . . . . . . . . . . . . . . . . .85/tube R0003NL 1 6 2 5 Connect unused pin to logic ground for optimum performance. PE-68624NL 1 6 3 4 B4003NL B4003NL Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Weight . . . . . . . . . 0.70 grams Tape & Reel . . . . . . . .400/reel Tube . . . . . . . . . . . . . .50/tube 1 PulseElectronics.com G051.A (10/22) Surface Mount Slic Package Common Mode Chokes Suited for LAN and Telecom WAN Applications MECHANICALS PE-68627NL SCHEMATICS .050 1,27 .345 MAX 8,76 .070 1.78 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .285 7,24 1 8 .100 2,54 PE-68627NL DATE CODE 4 COUNTRY OF ORIGIN .300 7,62 .355 MAX 9,02 8 3 6 2 .100 2,54 .270 6,86 SUGGESTED PAD LAYOUT 5 1 Weight . . . . . . . . . 0.32 grams Tape & Reel . . . . . . . .850/reel Tube . . . . . . . . . . . . . .45/tube .207 MAX 5,26 7 4 5 .004/0,100 8 Surfaces PE-65854NL .070 1,78 .050 1,27 .340 MAX 8,64 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .285 7,24 1 8 .100 2,54 .360 MAX 9,14 PE-65854NL DATE CODE 4 COUNTRY OF ORIGIN .300 7,62 .100 2,54 5 .270 6,86 SUGGESTED PAD LAYOUT .098 MAX 2,50 Weight . . . . . . . . . 0.23 grams Tape & Reel . . . . . . .1500/reel Tube . . . . . . . . . . . . . .60/tube 1 8 2 3 4 7 6 5 .004/0,100 8 Surfaces COMMON MODE TEST CIRCUIT FOR SURFACE MOUNT AND THROUGH HOLE 50 Ω D.U.T. 50 Ω Test Notes: 1. Network analyzer calibrated to compensate for 50 Ω resistors. 2. All windings on a core are connected in parallel for the test. 3. For multi-core chokes, test data is for one core only. The windings on the other core(s) are left unconnected (i.e. open). HP 3577A Network Analyzer For More Information: Americas - prodinfonetworkamericas@yageo.com | Europe - prodinfonetworkemea@yageo.com | Asia - prodinfonetworkapac@yageo.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2022. Pulse Electronics, Inc. All rights reserved. 2 PulseElectronics.com G051.A (10/22)