TX1322NL

T1/E1/CEPT/ISDN-PRI INTERFACE MODULES Four Transformer Modules for Dual SMT T1/E1 Ports, Extended Temperature Range 5R+6SHDNUHIORZWHPSHUDWXUHUDWLQJã& 2SWLPL]HGIRUHQKDQFHG(0&SHUIRUPDQFH SMT Dual Port package contains transformers with optional common mode chokes on both transmit and receive channels 0RGHOVPDWFKHGWROHDGLQJWUDQVFHLYHU,&V Patented Interlock Base construction for high-reliability Recognized to UL 1950 Isolation Voltage: 1500 Vrms Electrical Specifications @ 25°C Turns Ratio (Pri: Sec 2%) RoHS Compliant Part Number w/CMC wo/CMC Transmit Receive Secondary OCL @ 25ãC (mH MIN) Primary Pins Cw/w (pF MAX) DCR Pri (Ÿ MAX) Package/ Schematic Transmit Receive EXTENDED TEMPERATURE RANGE MODELS - OPERATING TEMPERATURES -40ãC TO +85ãC T1176NL - 1CT:2.4CT 1CT:1CT 1.20 35 .80 WAT/2 1-3 & 10-12 21-19 & 18-16 TX1192NL - 1CT:2.42CT 1CT:2.42CT 1.20 25 .80 WAT/1 4-6 & 10-12 1-3 & 7-9 TX1193NL TX1323NL 1CT:2CT 1CT:1CT 1.20 35 .80 WAT/1 4-6 & 10-12 24-22 & 18-16 Notes: 1. Extended Temperature Range Models - For extended temperature range transformers (-40ãC to +85ãC operating temperature range), OCL (Open Circuit Inductance) is specified at both -40ãC and +25ãC. At -40ãC, OCL is 600 ȝH minimum. All other parameters are specified at +25ãC only. 2. Turns ratio is specified primary: secondary (CT = Center Tap). 3. Standard packaging for the surface mount package is anti-static tubes. Optional Tape & Reel can be ordered by adding a “T” suffix to the part number, (i.e T1176NLT). Mechanical Schematics WAT  

   Weight ......................3.8 grams Tape & Reel ..................175/reel Tray ..............................105/tray USA 858 674 8100 Germany 49 7032 7806 0 1 Singapore 65 6287 8998 pulseelectronics.com Dimensions: Inches Unless otherwise specified, all tolerances are ± .010 mm 0,25 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768 T662.F (5/17) T1/E1/CEPT/ISDN-PRI INTERFACE MODULES Four Transformer Modules for Dual SMT T1/E1 Ports, Extended Temperature Range Application Notes 1. Flammability - Materials used in these products are recognized as UL94-VO approved. Products meet the requirements of IEC 695-2-2 (Needle Flame Test). 2. Balance Characteristics - The transformers meet the requirements for longitudinal balance of FCC part 68. 3. Common Mode Rejection Ratio - the CMRR for all transformers is better than 50 dB at 1 MHz. 4. Crosstalk Attenuation - In the packages which contain transmit and receive transformers side by side, sufficient crosstalk attenuation is achieved by the inherent charact -eristics of the toroid cores as well as by their proper pos -itioning. The crosstalk attenuation is typically 65 dB or better. Frequency 50-100 KHz 100KHz-2 MHz 2-3 MHz Return Loss XMIT 9 dB 15 dB 11 dB RCV 12 dB 18 dB 14 dB 6. General information - The transformers are specifically designed for use in 1.544 Mbps (T1), 2.048 Mbps (CEPT) and ISDN Primary Rate Interface (PRI) applications. They are matched to the majority of the line interface transceiver ICs currently available. Use of the proper trans -former allows the interface circuit to comply with ITU-T G.703 and other standards regarding pulse waveform, return loss, and balance. 5. Return Loss - ITU-T G703 and the European national regulatory documents specify minimum return loss levels. The transformers will allow these limits to be complied within the situations where they are applicable. For More Information Pulse Worldwide Headquarters 12220 World Trade Drive San Diego, CA 92128 U.S.A. Pulse Europe Einsteinstrasse 1 D-71083 Herrenberg Germany Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Academy of Room 2704/2705 135 Joo Seng Road 3F, No. 198 Aerospace TechnolSuper Ocean Finance #03-02 Zhongyuan Road ogy Bldg. Ctr. PM Industrial Bldg. Zhongli City 10th Kejinan Road 2067 Yan An Road Singapore 368363 Taoyuan County 320 High-Tech Zone West Taiwan R. O. C. Nanshan District Shanghai 200336 Tel: 886 3 4356768 Tel: 65 6287 8998 Shenzen, PR China China Fax: 886 3 4356823 (Pulse) Tel: 49 7032 78060 Fax: 65 6287 8998 518057 Fax: 886 3 4356820 (FRE) Tel: 858 674 8100 Fax: 49 7032 7806 135 Tel: 86 755 33966678 Tel: 86 21 62787060 Fax: 858 674 8262 Fax: 86 755 33966700 Fax: 86 2162786973 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2012. Pulse Electronics, Inc. All rights reserved. 2 pulseelectronics.com T662.F (5/17)