AND-TFT-070WTP

Displays AND-TFT-070WTP 800 x 480 Pixels LCD Color Monitor The AND-TFT-070WTP is a compact full color TFT LCD module with CCFL backlight unit. This display is suitable for industrial video monitor, test equipments and medical test equipments monitoring devices. This device consists of amorphous silicon TFT liquid crystal display with CCFL B/L unit. The display has 800 x 480 pixels on a 7.0 inch diagonal screen. 16:9 wide aspect ratio. Features • Wide VGA (800 x 480 pixel) resolution • 7.0 inch (16 cm) diagonal screen • Amorphous silicon TFT LCD panel with backlight unit • Ultra compact • Single Operation Voltage +12V • CVBS / S-Video (optional) • Analog RGB (PC Mode) Signal Input) • NTSC/PAL/SECAM Video Auto Switch • Applications: Portable product, industrial, hand-held, security, instrument display, office electronics • USB Touch panel (optional) • RoHS compliant Mechanical Characteristics Item Specification Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Backlight Surface Treatment Display Mode 7.0 inch (16.9 cm) diagonal 800 x (R, G, B) x 480 262,144 152.4 (W) x 91.44 (H) 0.1905 (W) x 0.1905 (H) stripe 166.3 (W) x 104.0 (H) x 6.2 (D) 175 ± 10 CCFL, 1 tube Anti-glare and Wide View Film Normally white Unit – dot mm mm – mm g – – – Absolute Maximum Ratings Item Input Voltage Video Input Signal S-Video Input Signal Analog RGB Input Signal Digital Input Signal Operating Temperature Storage Temperature Symbol Vin Video in S-Video in Analog RGB in TTL – – @75Ω @75Ω @75Ω Remarks Specifications Min. +9 0.5 0.5 0.5 +0.3 -10 -20 Max. +15 2.0 2.0 2.0 +3.6 +60 +70 Unit V Vp-p Vp-p Vp-p V ºC ºC Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 12/17/08 1 Displays Electrical Characteristics - Recommended Operating Conditions Item Input Voltage Total Current Power Consumption Output Voltage Video Input Signal S-Video Input Signal Analog RGB Input Signal VDD Video in S-Video in Analog RGB in Y C RGB Symbol Vin Iin I/O I I I O I I I I Specifications Min. +10 – – +3.2 – – – – Typ. +12 557 6.684 +3.3 1.0 0.7 0.286 0.7 Max. +14 – – +3.4 – – – – AND-TFT-070WTP Unit V mA W V Vp-p vp-p Vp-p Vp-p Note @ +12V I = 10 mA @ 75 Ω @ 75 Ω @ 75 Ω @ 75 Ω VGA Mode Characteristics Dots per inch 640 * 480 800 * 600 1024 * 768 1280 * 1024 Horizontal 31.469 37.879 48.363 63.981 Unit KHz KHz KHz KHz Polarity Negative Positive Negative Positive Vertical 59.941 60.317 60.004 60.020 unit Hz Hz Hz Hz Polarity Negative Positive Negative Positive Panel Backlight Data Parameter Lamp Voltage Lamp Current Symbol VL IL Min. 520 4 Typ. 580 6 Max. 638 7 Unit Vrms mA Note IL = 6 mA, (± 10%) Inverter Test Data Parameter Lamp Voltage Lamp Current Symbol IL VI Min. – – Typ. 6 575 Max. – – Unit mA Vrms Pin Description: J403A: Pin Assignment of SIgnal Input (Pitch 1.25 mm 8 Pin, Side Entry Type) Pin #. 1 2 3 4 Symbol VCC12V VCC12V GND_D GND_D I/O Description +12V Input Voltage +12V Input Voltage Ground Ground Pin #. 5 6 7 8 Symbol VIDEO1 GND_! VIDEO2 GND_A I/O I I Description Video 1 Input Signal Ground for Video 1 Video 2 Input Signal Ground for Video 2 Pin Description: J401B: Pin Assignment of Inverter (Pitch 1.25 mm 6 Pin, Side Entry Type) Pin #. 1 2 3 Symbol DC-IN DC-IN DIMMER I/O Description Inverter Power (+12V) Inverter Power (+12V) Backlight Brightness Adjust Pin #. 4 5 6 Symbol ENABLE GND GND I/O O Description Inverter Enable (0: Enable 1: Disable) Power Ground Power Ground O 12/17/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 2 Displays Pin Description: CN3: LCD Panel I/O Terminals Pin #. Symbol I/O Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 DIO1 VSS1 VDD1 CLK VSS1 R/L R0 R1 R2 R3 R4 R5 VSS1 G0 G1 I/O I I I I I I I I I I I I I I Horizontal Start Pulse Signal Input or Output Ground Power Ground Horizontal Shift Clock Ground Red Data Red Data (LSB) Red Data Red Data Red Data Red Data Red Data (MSB) Ground Green Data (LSB) Green Data Pin #. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol G2 G3 G4 G5 VSS1 B0 B1 B2 B3 B4 B5 LD REV POL DIO2 I/O I I I I I I I I I I I I I I I/O AND-TFT-070WTP Description Green Data Green Data Green Data Green Data (MSB) Ground Blue Data (LSB) Blue Data Blue Data Blue Data Blue Data Blue Data (MSB) Load Output Signal Data Invert Control Polarity Selection Horizontal Start Pulse Signal Input or Output (FPC 30 Pin Below Contact Type) Optical Characteristics: Ta = 25ºC Item Horizontal Viewing Angle Vertical Contrast Ration Response Time Brightness Luminance Uniformity White Chromaticity Lamp Life Time Rise Fall Symbol Left Right Top Bottom CR Tr Tf L U x y – – at optimized viewing angle CR > 10 Condition Specifications Min. 55 55 35 50 250 – – 350 70 0.27 0.297 25,000 Typ. 60 60 40 55 400 15 25 400 75 0.30 0.327 – Max. – – – – – 30 50 – – 0.33 0.357 – Unit deg. deg. deg. deg. – ms ms cd/m2 % – – hr θ = 0º θ = 0º – 12/17/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 3 Displays Pin Description: CN4: LCD Panel I/O Terminals Pin #. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Symbol VSS2 V1 V2 V3 V4 V5 V6 V7 VSS2 V8 V9 V10 V11 V12 V13 I/O I I I I I I I I I I I I I I I Description Ground Gamma Voltage Level 1 Gamma Voltage Level 2 Gamma Voltage Level3 Gamma Voltage Level 4 Gamma Voltage Level 5 Gamma Voltage Level 6 Gamma Voltage Level 7 Ground Gamma Voltage Level 8 Gamma Voltage Level 9 Gamma Voltage Level 10 Gamma Voltage Level 11 Gamma Voltage Level 12 Gamma Voltage Level 13 Pin #. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol V14 VSS2 VDD2 VCOM XON OE U/D CKV STVU STVD VGG GND VCC GND VEE I/O I I I I I I I I I/O I/O I I I I I AND-TFT-070WTP Description Gamma Voltage Level 14 Ground Voltage for Analog Circuit Common Voltage NC Output Enable U/Down Selection Vertical Shift Clock Vertical Shift Pulse Signal Input or Output Vertical Shift Pulse Signal INput or Output Gate on Voltage Ground Voltage for Logic Circuit Ground Gate off Voltage (FPC 30 Pin Below Contact Type) Pin Description: J402B: Pin Assignment of Analog RGB Input (D-Sub 15 Pin) Pin #. 1 2 3 4 5 6 7 8 Symbol R1+ G1+ Bi1 NC GND AGND AGND AGND I/O I I I Description Analog Red Signal Analog Green Signal Analog Blue Signal No Connection Ground Analog Ground Analog Ground Analog Ground Pin #. 9 10 11 12 13 14 15 Symbol VGA5V VGA-Det NC NC HS_IN VS_IN NC I/O I Description VGA +5V Input VGA Detect No Connection No Connection TTL Horizontal sync TTL Vertical sync No Connection I I Pin Description:J405 Pin Assignment of Key (Pitch 1.25 mm 9 Pin, Side Entry Type Pin #. 1 2 3 4 5 Symbol N.C. KEY-ADC1 KEY-ADC0 GND VDD I/O I I Description No Connection KEY ADC Input 1 KEY ADC Input 0 Ground +3.3V Output Voltage Pin #. 6 7 8 9 Symbol IR_DATA LED-R LED-G GND I/O I O O Description DATA of IR Receiver Index Red LED for power off control Index Green LED for power on control Ground 12/17/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 4 Displays Simple Demo Board Manual (Optional) AND-TFT-070WTP 12/17/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 5 Displays Keyboard Manual AND-TFT-070WTP Driver Board - Built-in Female D-SUB 15 12/17/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 6 Displays Module AND-TFT-070WTP 12/17/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7 Displays Application Schematic Diagram: Application Circuit AND-TFT-070WTP 12/17/08 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 8