AND-TFT-35PA-KIT

AND-TFT-35PA-KIT 3.5" TFT LCD LCD Color Monitor The AND-TFT-35PA-KIT is a compact full color TFT LCD module, that is suitable for camcorder, digital camera applications and other electronic products which require high quality flat panel displays. This device consists of a twisted nematic (TN) liquid crystal cell, that incorporates a TFT-array that has 160 x 234 pixels on a 3.5 inch diagonal screen, X and Y drivers, an LSI controller, and a built-in CCFL backlight. Mechanical Characteristics Item Specification Screen Size Outline Dimensions Active Area Input Signal Pixel Number (RGB trio) Sub Pixel No. Sub Pixel Arrangement Dot Pitch Weight 3.5 inch diagonal 83.7 (W) x 68.6 (H) x 6.6 (D) 72.0 (W) x 50.54 (H) NTSC/PAL 160 (W) x 234 (H) 160 (W) x 234 (H) Delta 0.149 (W) x 0.225 (H) 58±5 Unit inch mm mm – – – – mm g Features • No controller chip is necessary • Compatible with NTSC or PAL system (switchable) • RoHS compliant • Optimum viewing direction: 6 o’clock • Up/Down and Left/Right image inversion Absolute Maximum Rating Item for Source Driver Supply Voltage for Gate Driver Analog Digital Positive Negative Symbol AVDD VDD VGH VGL VGH - VGL VVIDEO Top Tstg – Conditions Absolute Maximum Rating Min. -0.3 -0.3 Max. +7.0 +7.0 +45 +0.3 +40 +7.3 +60 +70 95% Unit Ta = 25°C -0.3 -.23 +15 -0.3 V Analog Input Voltage (means VR, VG, VB ) Operating Temperature (define elements atTa=+25) Storage Temperature Humidity (No condensation of water) V °C °C RH – – 60°C 0 -20 – Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 7/28/07 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 1 AND-TFT-35PA-KIT Power Consumption Item LCD Panel Power Consumption Backlight Lamp Power Consumption Total Power Consumption (Ta =25°C) Symbol – – – Remarks – calculated by IL x VL. – Min. – – – Specifications Typ. Max. 33.5 – 0.65 0.69 – – Units mW W W Backlight Connector JST BHR-03VS-2 Recommended Operating Conditions Item Symbol VCC VDD AVDD Power Supply (Ta = 25°C) VGH VEE VGL AC VGL DC Video Signal (VR, VG, VB) VC OM H Level L Level Vi AC Vi DC VCOM AC VCOM DC VIH VIL AC Component of VG L DC Component of VG L AC Component DC Component AC Component of VC OMM DC Component of VC OMM Note 1 DIO1, DIO2 Remarks Min. +4.5 +3.0 +4.5 +14.5 -15.5 – -12.5 – – – +0.9 +0.7 VDD – Specifications Typ. +5.0 +3.3 +5.0 +15.0 -15.0 +6.0 -11.0 +4.0 +2.5 +6.0 +1.0 – – Max. +5.5 +3.6 +5.5 +15.5 -14.5 – -9.5 +4.2 – – +1.1 – +0.3 VDD Unit V VP-P V VP-P V VP-P V V Note 1: STH1, STH2, CPH1, CPH2, CPH3, Q2H, INH, CPV, XOE, Optical Specifications Item Horizontal Viewing Angle Contrast Ratio Luminance when LCD is White Luminance when LCD is Black Symbol Conditions Vertical θ θ (to 12 o’clock) θ (to 6 o’clock) CR Tr Tf T U LUM X Y Tc – Min. ± 45 10 30 110 – – 7.5 65 200 0.280 0.310 6650 10,000 Specifications Typ. Max. ± 50 – 15 35 150 15 25 8.0 70 250 0.310 0.340 6850 – – – – 30 50 8.5 – – 0.340 0.370 7050 – Unit CR≥ 10 deg At optimized viewing angle – ms % – cd/m2 – hr Response Time Transmission Uniformity Brightness White Chromaticity Lamp Life Time Rise Fall Ratio θ =0° φ =0° – – – θ =0° – +25°C 2 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/28/07 AND-TFT-35PA-KIT Interface Pin Assignment Pin No. Symbol Function STH1 1 Start pulse for source driver 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 AVSS AVDD VB VG VR VSS VDD CPH1 CPH2 CPH3 STH2 Q2H INH R/L VCOM VCOM XOE CPV U/D DIO2 DIO1 VGL VEE VSS VCC VGH NC Analog GND for source driver Analog power input for source driver Video Input B Video Input G Video Input R Digital GND Digital power input Sampling and shift clock for source driver Sampling and shift clock for source driver Sampling and shift clock for source driver Start pulse for source driver Video input rotation control Output enable for source driver Left/Right Control for source driver Common electrode voltage Common electrode voltage Output enable for gate driver Clock input for gate driver Up/Down Control for gate driver Vertical start pulse Vertical start pulse Gate off voltage (alternative every 1-H) Gate driver negative voltage GND Logic power for gate driver Gate on voltage No connection Input/Output Input/Output Input Input Input Input Input Input Input Input Input Input Input/Output Input Input Input Input Input Input Input Input Input/Output Input/Output Input Input Input Input Input – VDD, VCC =+5V (Typ..) VEE = +15V (Typ..) – Note 2 VCOM =6VPP VEE = -15V (Typ..) Note 1 VCOM =6VPP VDD, VCC =+5V (Typ..) VCOM =6VPP AVDD= +5V (Typ..) Note 1 Remark Note 1: STH1, STH2 and R/L mode R/L High (VDD) Low (0 Volt.) STH1 Input Output STH2 Output Input Remarks Left to Right Right to Left Note 2: DIO1, DIO2 and U/D mode U/D High (VDD) Low (0 Volt.) DIO1 Input Output DIO2 Output Input Remarks Down to Up Up to Down 7/28/07 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 3 AND-TFT-35PA-KIT Dimensional Outline 4 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/28/07