AND116SG

AND116SG Standard Bright LED Lamps Weight: 0.35 g Unit: mm Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 5.9 5.0 AND116SG 8.7 1.0 Dual Color T-1 3/4 (5mm) Features 0.5 • Dual color: Red (GaAsP) / Green (GaP) • Common cathode • All plastic mold type, milky diffused lens • Low drive current: 15 to 20 mA • Fast response time, capable of pulse operation • RoHS Compliant Optical Characteristics (Ta = 25°C) 22.1 MIN. 2.54 2.54 Cathode Index Color 1 2 3 23.9 MIN. 25.4 MIN. 0.5 Lens Desc. LED Red Green Lens Milky Milky Diffused Diffused Axial Luminous Intensity (mcd) Min. 10 10 Typ. 12 12 Test Condition (IF–mA) 20 20 Viewing Angle 2θ1/2 (deg) 70 70 1. Anode (Green) 2. Common Cathode 3. Anode (Red) Absolute Maximum Ratings (Ta = 25°C) Characteristics Forward Current Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Range Symbol IF VR PD TOpr TStg Rating Red 25 5 75 -25 to +85 -25 to +100 Green 25 5 75 Unit mA V Total Package °C °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width Symbol VF IR λp λ Test Condition IF = 20mA VR = 4 V IF = 20mA IF = 20mA Red Typ. 2.1 – 635 40 Max. 3.0 100 – – Typ. 2.1 – 565 25 Green Max. 3.0 100 – – Unit V µA nm nm Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/18/07 AND116SG Dual Color IV – IF 50 30 Luminous Intensity IV (mcd) Ta = 25°C Luminous Intensity IV (mcd) 50 30 Ta = 25°C Standard Bright LED Lamps IV – IF Red 10 5 3 10 5 3 Green 1 1 3 5 10 30 50 100 Forward Current IF (mA) 1 1 3 5 10 30 50 100 Forward Current IF (mA) IF – VF 50 Forward Current IF (mcd) 30 Forward Current IF (mcd) Ta = 25°C 40 IF – Ta 30 Red 10 5 3 Green 20 10 1 1.7 1.8 1.9 2.0 2.1 2.2 2.3 Forward Voltage VF (V) 1 0 20 40 60 80 100 Ambient Temperature Ta (°C) IV – TC 3 1.0 Red Relative Luminous Intensity IV Relative Lumnoius Intensigy 1 Green 0.8 Relative Luminous Intensity – Wavelength IF = 15mA Ta = 25°C 0.6 Red 0.4 Green 0.5 0.3 0.2 1 -20 0 2.0 40 Case Temperature TC (°C) 60 80 0 540 560 580 600 620 640 660 680 Wavelength λ (nm) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/18/07