AND124R

AND124R Standard Bright LED LAMPS Weight: 0:30 g Unit: mm AND124R ø3.8 ± 0.2 ø3.1 ± 0.2 Standard LED T-1 Package (3 mm) Features • RoHS Compliant 2.1 max • Low power requirement • Stand-off or flush-mount • All plastic molded lens • Color: GaP–Red 4.0 1.0 5.0 0.5 0.5 25.5 Optical Characteristics (Ta = 25°C) Part Number AND124R Color LED Red Lens Red Diffused Lens Desc. Axial Luminous Intensity (mcd) Min. 1.3 Typ. 3.0 Test Condition (IF–mA) 10 Viewing Angle 2θ1/2 (deg) 60 1.5 1.5 2.54 Absolute Maximum Ratings (Ta = 25°C) Characteristics 1. Anode 2. Cathode 0.5 Symbol IF VR PD TOpr TStg Rating 25 5 120 -40 to +85 -40 to +85 Unit mA V mW °C °C Forward Current (DC) Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Range 1 2 Electro-Optical Characteristics (Ta = 25°C) Red Characteristics Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width Symbol VF IR λp λ Test Condition Min. IF = 20mA VR = 5 V IF = 15mA IF = 15mA – – – – Typ. 2.0 – 700 45 Max. 2.5 10 – – V µA nm nm Unit Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 6/12/07 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 1 www.purdyelectronics.com AND124R Standard LED IF vs. VF 50 30 TA = 25°C 30° 40° 50° 60° 70° 80° 90° 1.0 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 2.3 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 20° Radiation Pattern 10° 0° 10° Standard Bright LED LAMPS Forward Current IF (mA) 20 10 5 3 2 1 1.7 20° 30° 40° 50° 60° 70° 80° 90° 1.0 5 IV vs. IF 1.0 Relative Luminous Intensity – Wavelength Relative Luminous Intensity IV 2 Relative Luminous Intensity 2 5 10 20 50 0.8 1 0.5 0.6 0.4 0.2 0.1 1 0.2 0 660 680 700 720 740 760 Wavelength λ (nm) Forward Current IF (mA) This graph shows relative luminous vs. forward current. At three points (IF = 10, 15, 20mA) each relation is normalized.) IV vs. TC 3 IV vs.TA Relative Luminous Intensity IV 2 Allowable Forward Current IF (mA) 0 20 40 60 Case Temperature TC (°C) 80 40 30 1 20 0.5 0.4 0.3 -20 10 0 0 20 40 60 80 100 Ambient Temperature TA (°C) 2 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com 6/12/07 www.purdyelectronics.com