AND157HYP

AND157HYP Ultra Bright LED Lamps: Type 3 Weight: 0.31 g Unit: mm AND157HYP 6.0+0.2 InGaAlP High Brightness Yellow Light Emission T-1 3/4 Package (5 mm) Features • Peak wavelength (λp = 591 nm) high bright emission • All plastic mold type, clear colorless lens • Low drive current: 1 to 20 mA DC • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • High power luminous intensity • Suitable for Outdoor Message Signboards • RoHS Compliant Maximum Ratings (Ta = 25°C) Characteristics Forward Current Symbol IF VR PD TOpr TStg 8.6±0.3 5.0±0.2 1.0±0.2 0.5 1.0 MIN. 26.4 MIN. Rating 50 5 100 -40 to 85 -40 to 120 Unit mA V mW °C °C 2.54 Cathode Index 0.5 Reverse Voltage Power Dissipation 1 2 Operating Temperature Range 1. Anode 2. Cathode Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol VF IR IV lP ∆λ λd θ Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 1,600 – – – – Typical 2.1 – 2,500 591 15 589 15 Maximum 2.4 10 – – – – – Unit V µA mcd nm nm nm degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/18/07 AND157HYP InGaAlP High Brightness Yellow Light Emission IF – VF 50 Luminous Intensity IV (mcd) 5000 3000 Ta = 25°C Ultra Bright LED Lamps: Type 3 IV – VF Forward Current IF (mA) 30 Ta = 25°C 1000 500 300 10 5 3 100 50 1 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 20 1 3 5 10 30 50 100 300 500 Forward Voltage VF (V) Forward Current IF (mA) IV – TC 3 Relative Luminous Intensity 1.0 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity 0.8 1 0.5 0.3 0.6 0.4 0.2 0 540 0.1 -20 0 20 40 60 80 560 580 600 620 640 660 Case Temperature TC (°C) Wavelength λ (nm) Radiation Pattern Allowable Forward Current IF (mA) IF – Ta 20° 30° 40° 50° 60° 70° 80° 90° 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 50 25 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/18/07