AND181YP

AND181YP Standard Bright LED LAMPS Weight: 0:30 g Unit: mm Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 5.9 AND181YP Standard LED T-1 3/4 Package (5 mm) Features • Low power requirement • Flush-mount • All plastic molded lens • Color: GaAsP–Yellow Optical Characteristics (Ta = 25°C) 24.0 MIN. 5.0 1.0 8.7 • RoHS Compliant 1.5 TYP Color LED Lens Lt Yellow Lens Desc. Clear Axial Luminous Intensity (mcd) Min. 75 Typ. 150 0.5 Test Condition (IF–mA) 20 Viewing Angle 2θ1/2 (deg) 15 Yellow 2.54 Cathode Index 0.5 Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol IF VR PD TOpr TStg Rating (Yellow) 30 4 75 -25 to +85 -25 to +100 Unit mA V mW °C °C Forward Current (DC) 1. Anode 2. Cathode 1 2 Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Yellow Characteristics Symbol VF IR λp λ Test Condition Min. Typ. 2.1 – 585 32 Max. 3.0 100 – – V µA nm nm IF = 20mA VR = 4 V IF = 15mA IF = 15mA – – – – Unit Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com 7/18/07 1 www.purdyelectronics.com AND181YP Standard LED IF – VF 50 Luminous Intensity IV (mcd) 3000 Ta = 25°C 1000 500 300 Standard Bright LED LAMPS IV – VF Forward Current IF (mA) 30 Ta = 25°C 10 5 3 100 50 1 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 20 1 3 5 10 30 50 100 300 Forward Current IF (mA) Forward Voltage VF (V) IV – TC 3 Relative Luminous Intensity 1.0 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity 0.8 1 0.5 0.3 0.6 0.4 0.2 0 540 0.1 -20 0 20 40 60 80 Case Temperature TC (°C) 560 580 600 620 640 660 Wavelength λ (nm) Radiation Pattern 40 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 Allowable Forward Current IF (mA) IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° 30 20 10 20 40 60 80 Ambient Temperature Ta (°C) 100 2 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com 7/18/07 www.purdyelectronics.com