AND185HOP

AND185HOP Ultra Bright LED Lamps: Type 3 Weight: 0.31 g Unit: mm 5.6±0.3 AND185HOP InGaAlP High Brightness Orange Light Emission T-1 3/4 Package (5 mm) 8.6±0.3 5.0±0.2 Features • Peak wavelength (λp = 620 nm) high bright emission • All plastic mold type, clear colorless lens • Low drive current: 1 to 20 mA DC • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • High power luminous intensity • Suitable for Outdoor Message Signboards, Automotive Use • RoHS Compliant Maximum Ratings (Ta = 25°C) Characteristics Symbol IF VR PD TOpr TStg 1.0±0.2 0.5 1.0 MIN. 25.4 MIN. Rating 50 5 125 -40 to 85 -40 to 100 Unit mA V mW °C °C 2.54 Cathode Index 0.5 Forward Current Reverse Voltage Power Dissipation 1 2 1. Anode 2. Cathode Operating Temperature Range Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol VF IR IV λP ∆λ λd θ Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 9,000 – – – – Typical 2.0 – 11,750 620 18 615 6 Maximum 2.4 10 – – – – – Unit V µA mcd nm nm nm degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 6/12/07 AND185HOP InGaAlP High Brightness Orange Light Emission IF – VF 20000 50 Luminous Intensity IV (mcd) Forward Current IF (mA) 30 Ta = 25°C 10000 5000 3000 Ta = 25°C Ultra Bright LED Lamps: Type 3 IV – IF 10 5 3 1000 500 1 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 300 1 3 5 10 30 50 100 Forward Current IF (mA) Forward Voltage VF (V) IV – TC 3 Relative Luminous Intensity 1.0 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity 0.8 1 0.5 0.3 0.6 0.4 0.2 0 580 0.1 -20 0 20 40 60 80 Case Temperature TC (°C) 600 620 640 660 680 700 Wavelength λ (nm) Radiation Pattern 80 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 0 0 Allowable Forward Current IF (mA) IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° 60 40 20 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 6/12/07