AND190HBB

AND190HBB Ultra Bright LED Lamps: Type 3 Weight: 1.0g Unit: mm AND190HBB 11.0±0.3 InGaN High Brightness Blue Light Emission T-3 Package (10 mm) Features • New emission material (InGaN) blue LED • Peak wavelength (λp = 470 nm) high bright emission • All plastic mold type, clear colorless lens • Low drive current, (forward current = 1 to 20 mA) • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • High power luminous intensity • Suitable for Outdoor Message Signboards, Automotive use. • RoHS Compliant Maximum Ratings (Ta = 25°C) 13.5 ± 0.3 10.0±0.2 2.0±0.2 0.5 2.54 Cathode Index 1.0 MIN. 25.4 MIN. Characteristics Forward Current Reverse Voltage Power Dissipation 1. Anode 2. Cathode Symbol IF VR PD TOpr TStg Rating 25 5 125 -40 to 85 -40 to 100 Unit mA V mW °C °C 12 0.5 Operating Temperature Range Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Characteristics Forward Voltage Reverse Current Luminous Intensity Peak Emission Wavelength Spectral Line Half Width Dominant Wavelength Full Viewing Angle Symbol VF IR IV λP ∆λ λd θ Test Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IV = 1/2 Peak Minimum – – 630 – – – – Typical 3.8 – 1,250 470 35 468 15 Maximum 4.0 10 – – – – – Unit V µA mcd nm nm nm degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 5 sec. max Soldering portion of lead: up to 1.6 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/18/07 AND190HBB InGaN High Brightness Blue Light Emission Ultra Bright LED Lamps: Type 3 IF – VF 5000 50 Luminous Intensity IV (mcd) Forward Current IF (mA) 30 Ta = 25°C 3000 Ta = 25°C IV – IF 1000 500 300 10 5 3 100 50 0.5 1 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 1 3 5 10 30 50 100 Forward Voltage VF (V) Forward Current IF (mA) IV – TC 3 Relative Luminous Intensity 1.0 Relative Luminous Intensity – Wavelength IF = 20 mA Ta = 25°C Relative Luminous Intensity 0.8 1 0.5 0.3 0.6 0.4 0.2 0 430 0.1 -20 0 20 40 60 80 Case Temperature TC (°C) 450 510 490 470 Wavelength λ (nm) 530 550 Radiation Pattern 40 Allowable Forward Current IF (mA) 10° 0° 10° Ta = 25°C 20° 30° 40° 50° 60° 70° 80° 90° 0 0.2 0.4 0.6 0.8 35 30 25 20 15 10 10 0 0 IF – Ta 30° 40° 50° 60° 70° 80° 90° 20° 20 40 60 80 Ambient Temperature Ta (°C) 100 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com 7/18/07