AND211YA

AND211YA Standard Bright LED Lamps Weight: 0.30 g Unit: mm 3.9(.154) 1.9(.075) Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. AND211YA 1.0 Max 7(.276) Special Shape 1.9mm x 3.9mm Rectangular Features 0.5(0.2) Cathode 1.5(.06)Typ 27(1.063) Min • Low power requirement • Special shape • All plastic molded lens • GaAsP – Yellow • RoHS Compliant Optical Characteristics (T = 25°C) Part Number 2.54(0.1) Color LED Lens Yellow Lens Desc. Axial Luminous Test Intensity Condition (mcd) (IF–mA) Min. Typ. 2.0 4.0 10 Viewing Angle 2θ1/2 (deg) 110 AND211YA Yellow Diffused Absolute Maximum Ratings (TA = 25°C) Characteristics Forward Current Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Range Symbol IF VR PD TOpr TStg Rating 30 5 105 -40 to +85 -40 to +85 Unit mA V mW °C °C Electro-Optical Characteristics (TA = 25°C) Characteristics Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width Symbol VF IR λp λ Test Condition Typ. IF = 20mA VR = 5V IF = 20mA IF = 20mA 2.1 – 590 35 AND211YA (Yellow) Max. 2.5 10 – – V µA nm nm Unit Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com • www.purdyelectronics.com 7/18/07 AND211YA Standard Bright LED Lamps IV vs. TC 50 3 30 TA = 25°C IF vs. VF Relative Luminous Intensity IV Forward Current IF (mA) 0 20 40 60 Case Temperature TC (°C) 80 2 20 10 5 3 2 1 1.7 1 0.5 0.4 0.3 -20 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 2.3 IV vs.TA IV vs. IF 5 Allowable Forward Current IF (mA) 40 Relative Luminous Intensity IV 20 40 60 80 100 2 1 0.5 30 20 10 0.2 0.1 1 20 2 5 10 Forward Current IF (mA) 50 0 0 Ambient Temperature TA (°C) Relative Luminous Intensity vs. Wavelength 1.0 TA = 25° Relative Luminous Intensity 0.8 0.6 0.4 0.2 0 520 540 560 580 600 Wavelength (nm) 620 640 660 680 700 720 740 760 780 800 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com • www.purdyelectronics.com 7/18/07